代码搜索：X

找到约 10,000 项符合「X」的源代码

代码结果 10,000
热门代码： main.c GPIO I2C SPI UART timer interrupt ADC PWM LED
www.eeworm.com/read/346145/11764466

c msp430x261x_dma_03.c

//****************************************************************************** // MSP430x26x Demo - DMA0, Repeated Block UCA1UART 9600, TACCR2, ACLK // // Description: DMA0 is used to transfer
·
www.eeworm.com/read/346145/11764470

c msp430x261x_mpy_05.c

//****************************************************************************** // MSP430x26x Demo - 16x16 Unsigned Multiply Accumulate // // Description: Hardware multiplier is used to multip
·
www.eeworm.com/read/346145/11764473

c msp430x261x_tb_04.c

//****************************************************************************** // MSP430x26x Demo - Timer_B, Toggle P1.0, Overflow ISR, 32kHz ACLK // // Description: Toggle P1.0 using software
·
www.eeworm.com/read/346145/11764476

c msp430x261x_ta_01.c

//****************************************************************************** // MSP430x26x Demo - Timer_A, Toggle P1.0, CCR0 Cont. Mode ISR, DCO SMCLK // // Description: Toggle P1.0 using sof
·
www.eeworm.com/read/346145/11764485

c msp430x261x_ta_16.c

//******************************************************************************* // MSP430x26x Demo - Timer_A, PWM TA1-2, Up Mode, DCO SMCLK // // Description: This program generates two PWM out
·
www.eeworm.com/read/346145/11764489

c msp430x261x_dma_05.c

//****************************************************************************** // MSP430x26x Demo - DMA0, Repeated Blk to DAC0, Sine Output, TACCR1, DCO // // Description: DMA0 is used to tra
·
www.eeworm.com/read/346145/11764494

c msp430x261x_dma_12.c

//****************************************************************************** // MSP430x26x Demo - DMA1/0, Blk Mode UART1 9600 Auto RX/TX String, ACLK // // Description: DMA1 is used to captur
·
www.eeworm.com/read/346145/11764504

c msp430x261x_dma_04.c

//****************************************************************************** // MSP430x26x Demo - DMA0, Block Mode UART1 9600, ACLK // // Description: DMA0 is used to transfer a string as a
·
www.eeworm.com/read/346145/11764507

c msp430x261x_ta_19.c

//******************************************************************************* // MSP430x26x Demo - Timer_A, PWM TA1-2, Up/Down Mode, DCO SMCLK // // Description: This program generates two PW
·
www.eeworm.com/read/346145/11764512

c msp430x261x_pa_05.c

//****************************************************************************** // MSP430x26x Demo - Write a Word to Port A (Port7+Port8) // // Description: Writes a Word(FFFFh) to Port A and
·