The voltage range of Linear Technology’s PowerPath® circuitscan be Easily extended with just a few components, thusallowing them to meet the needs of virtually all applications.This application note presents solutions for circuits thatmust withstand large negative voltages, a reverse adapterinput for example, and circuits that must withstand largepositive inputs, such as automotive load-dump.
上传时间: 2013-10-21
上传用户:几何公差
为解决电致变色器件的颜色变化受外界环境颜色控制的问题,设计了一种基于单片机的便携式颜色自适应识别电路。与传统颜色识别电路相比较,该电路利用数字式的颜色传感器来获取外界环境颜色,产生的数字颜色信号易于单片机进行处理。在电路中,下位机部分主要负责获取电致变色器件变色参数及控制电致变色器件的颜色变化;而上位机部分主要负责把下位机获取的电致变色器件变色参数进行电压到颜色的曲线拟合,并通过蓝牙通信把拟合曲线参数传递给下位机。结果表明,该电路能自动根据环境颜色提供-4~4 V范围步进为0.1 V的电压来驱动电致变色器件的颜色显示,与传统的颜色识别电路设计相比,识别的精度和速度都得到了明显改善。 Abstract: In this paper, a portable adaptive circuit for color identification(PACCI) based on MCU was designed. Compared to the traditional color identification circuit, the PACCI adopts digital sensor to detect the color data from external environment and further generate digital color data, which can be processed Easily by MCU. In PACCI, the slave is mainly responsible for detecting the color parameters of the corresponding elcreochromic device and further driving it. For the master, which is mainly responsible for the color curve fitting based on the parameters of the electrochromic device, and transmits the fitting parameters to the slave through the bluetooth device. The results show that the PACCI can provide the basis voltage range from -4V to 4V automatically based on the colors of external environment with step as 0.1V to drive the corresponding electrochromic device. Compared to the traditional color recognition circuit, the recognition accuracy and speed of PACCI have been improved significantly.
上传时间: 2013-11-09
上传用户:franktu
介绍了基于单片机航空交流电参数测试仪的系统设计。以Silicon Labs公司的C8051F005单片机为核心设计出数据采集板,通过RS-232串口与上位机通讯。运用Lab Windows/CVI编写的上位机软件实现信号的检测以及波形和数据的显示,给出了测试仪硬件电路的组成和软件流程图。本系统具有硬件结构简单、容易实现和成本低等特点,在实际应用中其稳定性、精确性均能满足客户要求。 Abstract: The design of aeronautics AC parameters tester based on the single-chip is introduced.The core component of data acquisition board is C8051F005 single chip of Silicon Labs Company,and communication with PC through RS-232. The signal processing software programmed with LabWindows/CVI can be used successfully to fulfill inspection of signal and display of the waveform and data. The hardware and software configuration of test instrument are provided.The hardware of the system is simple, and can be Easily realized.The stability and precision of the measurement instrument are enough to meet the requirements.
上传时间: 2013-11-17
上传用户:wang5829
Abstract: This application note explains the hardware of different types of 1-Wire® interfaces and software examples adapted to this hardware with a focus on serial ports. Depending on the types of iButtons required for a project and the type of computer to be used, the most economical interface is Easily found. The hardware examples shown are basically two different types: 5V general interface and 12V RS-232 interface. Within the 5V group a common printed circuit board could be used for all circuits described. The variations can be achieved by different populations of components. The same principal is used for the 12V RS-232 interface. The population determines if it is a Read all or a Read/Write all type of interface. There are other possible circuit implementations to create a 1-Wire interface. The circuits described in this application note cover many different configurations. For a custom application, one of the described options can be adapted to meet individual needs.
标签: iButtons Reading Writing and
上传时间: 2013-10-29
上传用户:long14578
The 87C576 includes two separate methods of programming theEPROM array, the traditional modified Quick-Pulse method, and anew On-Board Programming technique (OBP).Quick Pulse programming is a method using a number of devicepins in parallel (see Figure 1) and is the traditional way in which87C51 family members have been programmed. The Quick-Pulsemethod supports the following programming functions:– program USER EPROM– verify USER EPROM– program KEY EPROM– program security bits– verify security bits– read signature bytesThe Quick-Pulse method is quite Easily suited to standardprogramming equipment as evidenced by the numerous vendors of87C51 compatible programmers on the market today. Onedisadvantage is that this method is not well suited to programming inthe embedded application because of the large number of signallines that must be isolated from the application. In addition, parallelsignals from a programmer would need to be cabled to theapplication’s circuit board, or the application circuit board wouldneed to have logic built-in to perform the programming functions.These requirements have generally made in-circuit programmingusing the modified Quick Pulse method impractical in almost all87C51 family applications.
上传时间: 2013-10-21
上传用户:xiaozhiqban
SRAM-based FPGAs are non-volatile devices. Upon powerup, They are required to be programmed from an external source. This procedure allows anyone to Easily monitor the bit-stream, and clone the device. The problem then becomes how can you effectively protect your intellectual property from others in an architecture where the part is externally programmed?
上传时间: 2013-11-05
上传用户:wl9454
UART 4 UART参考设计,Xilinx提供VHDL代码 uart_vhdl This zip file contains the following folders: \vhdl_source -- Source VHDL files: uart.vhd - top level file txmit.vhd - transmit portion of uart rcvr.vhd - - receive portion of uart \vhdl_testfixture -- VHDL Testbench files. This files only include the testbench behavior, they do not instantiate the DUT. This can Easily be done in a top-level VHDL file or a schematic. This folder contains the following files: txmit_tb.vhd -- Test bench for txmit.vhd. rcvr_tf.vhd -- Test bench for rcvr.vhd.
上传时间: 2013-11-07
上传用户:jasson5678
Abstract: The 1-Wire product family includes numerous devices that can be Easily evaluated using a Windows®-based
上传时间: 2013-10-12
上传用户:fudong911
The CC1101 is a low-cost sub- 1 GHztransceiver designed for very low-powerwireless applications. The circuit is mainlyintended for the ISM (Industrial, Scientific andMedical) and SRD (Short Range Device)frequency bands at 315, 433, 868, and 915MHz, but can Easily be programmed foroperation at other frequencies in the 300-348MHz, 387-464 MHz and 779-928 MHz bands.CC1101 is an improved and code compatibleversion of the CC1100 RF transceiver. Themain improvements on the CC1101 include:
上传时间: 2013-11-12
上传用户:363186
EMC_电磁兼容性设计英文版_RF currents flow Easily through galvanic isolation : transformers 500pf , relays 10 pf ,opto couplers 1 pf .
上传时间: 2013-10-30
上传用户:pzw421125