This application note demonstrates how to write an Inter Integrated Circuit bus driver (I2C) for the XA-S3 16-bitMicrocontroller from Philips Semiconductors.Not only the driver software is given. This note also contains a set of (example) interface routines and a smalldemo application program. All together it offers the user a quick start in writing a complete I2C system applicationwith the PXAS3x.The driver routines support interrupt driven single master transfers. Furthermore, the routines are suitable foruse in conjunction with real time operating systems.
上传时间： 2013-11-02
上传用户：zw380105939
The XA-S3 is a member of Philips Semiconductors’ XA (eXtended Architecture) family of high performance 16-bit single-chip Microcontrollers. The XA-S3 combines many powerful peripherals on one chip. Therefore, it is suited for general multipurpose high performance embedded control functions.One of the on-chip peripherals is the I2C bus interface. This report describes worked-out driver software (written in C) to program / use the I2C interface of the XA-S3. The driver software, together with a demo program and interface software routines offer the user a quick start in writing a complete I2C - XAS3 system application.
上传时间： 2013-11-10
上传用户：liaofamous
The MC68HC05K0 is a low cost, low pin countsingle chip microcomputer with 504 bytes of userROM and 32 bytes of RAM. The MC68HC05K0 isa member of the 68HC05K series of devices whichare available in 16-pin DIL or SOIC packages.It uses the same CPU as the other devices in the68HC05 family and has the same instructions andregisters. Additionally, the device has a 15-stagemulti-function timer and 10 general purposebi-directional I/0 lines. A mask option is availablefor software programmable pull-downs on all ofthe I/O pins and four of the pins are capable ofgenerating interrupts.The device is ideally suited for remote-controlkeyboard applications because the pull-downs andthe interrupt drivers on the port pins allowkeyboards to be built without any externalcomponents except the keys themselves. There isno need for external pull-up or pull-down resistors,or diodes for wired-OR interrupts, as these featuresare already designed into the device.
上传时间： 2014-01-24
上传用户：zl5712176
The 87C576 includes two separate methods of programming theEPROM array, the traditional modified Quick-Pulse method, and anew On-Board Programming technique (OBP).Quick Pulse programming is a method using a number of devicepins in parallel (see Figure 1) and is the traditional way in which87C51 family members have been programmed. The Quick-Pulsemethod supports the following programming functions:– program USER EPROM– verify USER EPROM– program KEY EPROM– program security bits– verify security bits– read signature bytesThe Quick-Pulse method is quite easily suited to standardprogramming equipment as evidenced by the numerous vendors of87C51 compatible programmers on the market today. Onedisadvantage is that this method is not well suited to programming inthe embedded application because of the large number of signallines that must be isolated from the application. In addition, parallelsignals from a programmer would need to be cabled to theapplication’s circuit board, or the application circuit board wouldneed to have logic built-in to perform the programming functions.These requirements have generally made in-circuit programmingusing the modified Quick Pulse method impractical in almost all87C51 family applications.
上传时间： 2013-10-21
上传用户：xiaozhiqban
附件有51单片机加上sl811读写U盘的源程序和原理图 /*--------------------------------------------------------------------------AT89X52.H Header file for the low voltage Flash Atmel AT89C52 and AT89LV52.Copyright (c) 1995-1996 Keil Software, Inc. All rights reserved.--------------------------------------------------------------------------*/ #ifndef AT89X52_HEADER_FILE#define AT89X52_HEADER_FILE 1 /*------------------------------------------------Byte Registers------------------------------------------------*/sfr P0 = 0x80;sfr SP = 0x81;sfr DPL = 0x82;sfr DPH = 0x83;sfr PCON = 0x87;sfr TCON = 0x88;sfr TMOD = 0x89;sfr TL0 = 0x8A;sfr TL1 = 0x8B;sfr TH0 = 0x8C;sfr TH1 = 0x8D;sfr P1 = 0x90;sfr SCON = 0x98;sfr SBUF = 0x99;sfr P2 = 0xA0;sfr IE = 0xA8;sfr P3 = 0xB0;sfr IP = 0xB8;sfr T2CON = 0xC8;sfr T2MOD = 0xC9;sfr RCAP2L = 0xCA;sfr RCAP2H = 0xCB;sfr TL2 = 0xCC;sfr TH2 = 0xCD;sfr PSW = 0xD0;sfr ACC = 0xE0;sfr B = 0xF0;
上传时间： 2014-01-05
上传用户：lnnn30
I2C总线高频头控制程序(Keil C51程序 基于芯片TSA5522系列) /*I2C总线高频头控制Keil C51程序(PLL芯片为TSA5522系列) *///--------------------------------------------------------------------------//// 源程序大公开 //// (c) Copyright 2001－2003 xuwenjun //// All Rights Reserved //// V1.00 ////--------------------------------------------------------------------------////标 题: I2C总线高频头控制程序(PLL芯片为TSA5522系列) ////文件名: xwj_fi1256.c ////版 本: V1.00 ////修改人: 徐文军 E-mail:xuwenjun@21cn.com ////日 期: 06-02-26 首次公开 ////描 述: I2C总线高频头控制程序(PLL芯片为TSA5522系列) ////声 明: //// 以下代码仅免费提供给学习用途，但引用或修改后必须在文件中声明出处. //// 如用于商业用途请与作者联系. E-mail:xuwenjun@21cn.com //// 有问题请mailto xuwenjun@21cn.com 欢迎与我交流! ////--------------------------------------------------------------------------////老版本: 无 老版本文件名: ////创建人: 徐文军 E-mail:xuwenjun@21cn.com ////日 期: 06-02-26 ////描 述: ////--------------------------------------------------------------------------// /* 频率单位为KHz */#define FUENCY 38900 /* 中频频率 */#define PLLdataH(f) ((f+FUENCY)*16/1000/256) /* 频率数据高 第1字节*/#define PLLdataL(f) ((f+FUENCY)*16/1000%256) /* 频率数据低 第2字节*/#define PLLCON1 0x8e /* 控制字1 第3字节*/ /* 控制字2 第4字节*/#define PLLCON2(f) (((f)<(168000))?(0xa0):(((f)<(450000))?(0x90):(0x30)))#define PLLdata3(fchan) PLLdataH (fchan),PLLdataL (fchan),PLLCON2 (fchan)
上传时间： 2013-11-10
上传用户：nanfeicui
cm119电路图
上传时间： 2013-11-01
上传用户：skhlm
This application note describes how to retrieve user-defined data from Xilinx configurationPROMs (XC18V00 and Platform Flash devices) after the same PROM has configured theFPGA. The method to add user-defined data to the configuration PROM file is also discussed.The reference design described in this application note can be used in any of the followingXilinx FPGA architectures: Spartan™-II, Spartan-IIE, Spartan-3, Virtex™, Virtex-E, Virtex-II,and Virtex-II Pro.
上传时间： 2013-11-11
上传用户：zhouli
This application note provides a detailed description of the Spartan™-3 configurationarchitecture. It explains the composition of the bitstream file and how this bitstream isinterpreted by the configuration logic to program the part. Additionally, a methodology ispresented that will guide the user through the readback process. This information can be usedfor partial reconfiguration or partial readback.
上传时间： 2013-11-05
上传用户：透明的心情
Xilinx is disclosing this user guide, manual, release note, and/or specification (the "Documentation") to you solely for use in the developmentof designs to operate with Xilinx hardware devices. You may not reproduce, distribute, republish, download, display, post, or transmit theDocumentation in any form or by any means including, but not limited to, electronic, mechanical, photocopying, recording, or otherwise,without the prior written consent of Xilinx. Xilinx expressly disclaims any liability arising out of your use of the Documentation. Xilinx reservesthe right, at its sole discretion, to change the Documentation without notice at any time. Xilinx assumes no obligation to correct any errorscontained in the Documentation, or to advise you of any corrections or updates. Xilinx expressly disclaims any liability in connection withtechnical support or assistance that may be provided to you in connection with the Information.
上传时间： 2014-01-13
上传用户：竺羽翎2222
