搜索结果
找到约 5 项符合
selects 的查询结果
汇编语言 selects the mux channel and configures the MAX197 for second write pulse, written with ACQMOD = 0,
selects the mux channel and configures the MAX197 for
second write pulse, written with ACQMOD = 0, termi-
either unipolar or bipolar input range. A write pulse (WR
nates acquisition and starts conversion on WR°Os risin
+ CS) can either start an acquisition interval or initiate a
edge (Figure 6). Ho ...
汇编语言 selects the mux channel and configures the MAX197 for second write pulse, written with ACQMOD = 0,
selects the mux channel and configures the MAX197 for
second write pulse, written with ACQMOD = 0, termi-
either unipolar or bipolar input range. A write pulse (WR
nates acquisition and starts conversion on WR°Os risin
+ CS) can either start an acquisition interval or initiate a
edge (Figure 6). Ho ...
汇编语言 selects the mux channel and configures the MAX197 for second write pulse, written with ACQMOD = 0,
selects the mux channel and configures the MAX197 for
second write pulse, written with ACQMOD = 0, termi-
either unipolar or bipolar input range. A write pulse (WR
nates acquisition and starts conversion on WR°Os risin
is restarted.
The ACQMOD bit in the input control byte offer+ CS) can either sta ...
VHDL/FPGA/Verilog vhdl编写
vhdl编写，8b—10b 编解码器设计
Encoder:
8b/10b Encoder (file: 8b10b_enc.vhd)
Synchronous clocked inputs (latched on each clock rising edge)
8-bit parallel unencoded data input
KI input selects data or control encoding
Asynchronous active high reset initializes all logic
Encoded data output
...
书籍 High-Frequency Oscillator Design
OSCILLATORS are key building blocks in integrated transceivers. In wired and
wireless communication terminals, the receiver front-end selects, amplifies and
converts the desired high-frequency signal to baseband. At baseband the signal can
then be converted into the digital domain for further data p ...