This application note shows how to write an Inter Integrated Circuit bus driver (I²C) for the Philips P90CL301micro-controller.It is not only an example of writing a driver, but it also includes a set of application interface software routines toquickly implement a complete I²C multi-master system application.For specific applications the user will have to make minimal changes in the driver program. Using the drivermeans linking modules to your application software and including a header-file into the application sourceprograms. A small example program of how to use the driver is listed.The driver supports i.a. polled or interrupt driven message handling, slave message transfers and multi-mastersystem applications. Furthermore, it is made suitable for use in conjunction with real time operating systems, likepSOS+.
上传时间： 2013-11-23
上传用户：weixiao99
I2C interface, is a very powerful tool for system designers. Theintegrated protocols allow systems to be completely software defined.Software development time of different products can be reduced byassembling a library of reusable software modules. In addition, themultimaster capability allows rapid testing and alignment ofend-products via external connections to an assembly-line computer.The mask programmable 87LPC76X and its EPROM version, the87LPC76X, can operate as a master or a slave device on the I2Csmall area network. In addition to the efficient interface to thededicated function ICs in the I2C family, the on-board interfacefacilities I/O and RAM expansion, access to EEPROM andprocessor-to-processor communications.
标签： microcontro Using 76X LPC
上传时间： 2013-12-30
上传用户：Artemis
CAN与RS232转换节点的设计与实现 介绍将CAN总线接口与RS232总线接口相互转换的设计方法和2种总线电平转换关系，实现CAN总线与各模块的接口设计，制定了相应的软硬件设计方案，并给出软件设计流程图以及部分硬件设计原理图。为CAN总线与RS232总线互联提供了一种方法，对CAN总线与RS232总线接口设备的互联和广泛应用的实现具有重要意义。关键词：CAN总线；RS-232总线；串行通信Design and Realization of CAN and RS232 Transformation NodeZHOU Wei, CHENG Xiao-hong(Information Institute, Wuhan University of Technology, Wuhan 430070)【Abstract】This paper introduces one design method of the CAN bus interface and the RS232 bus interface interconversion, emphasizes two kindof bus level transformation relations, realizes the CAN bus and various modules connection design, formulates the design proposal of correspondingsoftware and hardware, and gives the flow chart of software design as well as the partial schematic diagram of hardware design. It providesonemethod for the CAN bus and the RS232 bus interconnection, has the vital significance to widespread application realization of the CAN busand theRS232 bus interface equipment interconnection.【Key words】CAN bus; RS-232 bus; serial communication
上传时间： 2013-11-04
上传用户：leesuper
针对嵌入式机器视觉系统向独立化、智能化发展的要求，介绍了一种嵌入式视觉系统--智能相机。基于对智能相机体系结构、组成模块和图像采集、传输和处理技术的分析，对国内外的几款智能相机进行比较。综合技术发展现状，提出基于FPGA+DSP模式的硬件平台，并提出智能相机的发展方向。分析结果表明，该系统设计可以实现脱离PC运行，完成图像获取与分析，并作出相应输出。 Abstract: This paper introduced an embedded vision system-intelligent camera ，which was for embedded machine vision systems to an independent and intelligent development requirements. Intelligent camera architecture， component modules and image acquisition， transmission and processing technology were analyzed. After comparing integrated technology development of several intelligent cameras at home and abroad， the paper proposed the hardware platform based on FPGA+DSP models and made clear direction of development of intelligent cameras. On the analysis of the design， the results indicate that the system can run from the PC independently to complete the image acquisition and analysis and give a corresponding output.
上传时间： 2013-10-24
上传用户：bvdragon
A Computer-On-Module, or COM, is a Module with all components necessary for a bootable host computer, packaged as a super component. A COM requires a Carrier Board to bring out I/O and to power up. COMs are used to build single board computer solutions and offer OEMs fast time-to-market with reduced development cost. Like integrated circuits, they provide OEMs with significant freedom in meeting form-fit-function requirements. For all these reasons the COM methodology has gained much popularity with OEMs in the embedded industry. COM Express® is an open industry standard for Computer-On-modules. It is designed to be future proof and to provide a smooth transition path from legacy parallel interfaces to LVDS (Low Voltage Differential Signaling) interfaces. These include the PCI bus and parallel ATA on the one hand and PCI Express and Serial ATA on the other hand.
上传时间： 2013-11-05
上传用户：Wwill
资料说明介绍 PCB Translator_CAMCAD转换器3.95版本，里面含CAMCAD_3.9.5a_crack文件，可以对软件进行破解 （需要安装PCB Translator后才能进行破解） 针对PCB设计文件的RSI转换器能够转换PCB设计和生产所需要的所有信息。它们包括：库，布置位置，插入属性信息，网表，走线，文字和铜箔，以及其它相关的项目。不需要执行"导入Gerber"和"交叉参考"就可以完成所有这些工作。事实上，根本不需要定义参考，因为软件可以从原始文件格式中提取出CAD数据，并把它直接输出到新的文件格式中。只需要注意CAD系统本身的限制就可以了。 CAMCAD PCB 转换器 CAMCAD PCB 转换器是一个功能完善的PCB CAD 转换器，图形用户界面也很浅显易懂。CAMCAD PCB 转换器支持大多数流行的CAD格式，比如Cadence Allegro, Orcad, Mentor and Accel EDA,也支持工业标准格式，比如GenCAM, GenCAD, and IPC-D-356.CAMCAD PCB 转换器允许导入CAD文件到CAMCAD图形用户环境中，校验数据，修改数据，然后可以把数据导出为任意格式的文件。这些特性意味着用户可以完全控制所有的事情，比如层的转换，也能解决CAD格式之间不兼容的问题。 一个案例,如果要转换Cadence Allegro文件到PADS,所有必须的设计信息都会包含在新的文件中。不过，Cadence Allegro允许板子上的铜箔重叠，PADS却不允许。Allegro 文件可以正常导入到CAMCAD。如果要立即把这个文件导出到PADS，程序会有错误提示。这时，可以使用CAMCAD的数据处理特性来改变有问题的铜箔，解决问题后再导出到PADS。 下面的矩阵表格，列出了CAMCAD PCB 转换器所支持的当前PCB的转换组合。Import modules 一列中列出了可以被导入（读取）的所有ECAD文件格式。Export modules一行中列出了可以被导出（写）的文件格式。在这个矩阵中的任意输入和输出模块组合转换都是可行的。当然，没有任何ECAD到ECAD的转换器是绝对完美的。由于ECAD layout系统有自己独特的特性，而这些可能不能直接转换到另一个有自己独特特性的ECAD系统中。 CAMCAD PCB 转换器支持的组合 建议配置：Windows 2000 或者 XP Professional，800 MHZ 处理器，512MB RAM 17"显示器，1024×768分辨率 Copyright 2004 Router Solutions Incorporated RSI Reserves the right to make changes to its specifications and products without prior notice. CAMCAD is a registered trademark of Router Solutions Incorporated. All rights reserved. RSI recognizes other brand and product names as trademarks or registered trademarks of their respective holders.
标签： Translator_CAMCAD PCB 转换器
上传时间： 2014-07-31
上传用户：Shaikh
资料说明介绍 PCB Translator_CAMCAD转换器3.95版本，里面含CAMCAD_3.9.5a_crack文件，可以对软件进行破解 （需要安装PCB Translator后才能进行破解） 针对PCB设计文件的RSI转换器能够转换PCB设计和生产所需要的所有信息。它们包括：库，布置位置，插入属性信息，网表，走线，文字和铜箔，以及其它相关的项目。不需要执行"导入Gerber"和"交叉参考"就可以完成所有这些工作。事实上，根本不需要定义参考，因为软件可以从原始文件格式中提取出CAD数据，并把它直接输出到新的文件格式中。只需要注意CAD系统本身的限制就可以了。 CAMCAD PCB 转换器 CAMCAD PCB 转换器是一个功能完善的PCB CAD 转换器，图形用户界面也很浅显易懂。CAMCAD PCB 转换器支持大多数流行的CAD格式，比如Cadence Allegro, Orcad, Mentor and Accel EDA,也支持工业标准格式，比如GenCAM, GenCAD, and IPC-D-356.CAMCAD PCB 转换器允许导入CAD文件到CAMCAD图形用户环境中，校验数据，修改数据，然后可以把数据导出为任意格式的文件。这些特性意味着用户可以完全控制所有的事情，比如层的转换，也能解决CAD格式之间不兼容的问题。 一个案例,如果要转换Cadence Allegro文件到PADS,所有必须的设计信息都会包含在新的文件中。不过，Cadence Allegro允许板子上的铜箔重叠，PADS却不允许。Allegro 文件可以正常导入到CAMCAD。如果要立即把这个文件导出到PADS，程序会有错误提示。这时，可以使用CAMCAD的数据处理特性来改变有问题的铜箔，解决问题后再导出到PADS。 下面的矩阵表格，列出了CAMCAD PCB 转换器所支持的当前PCB的转换组合。Import modules 一列中列出了可以被导入（读取）的所有ECAD文件格式。Export modules一行中列出了可以被导出（写）的文件格式。在这个矩阵中的任意输入和输出模块组合转换都是可行的。当然，没有任何ECAD到ECAD的转换器是绝对完美的。由于ECAD layout系统有自己独特的特性，而这些可能不能直接转换到另一个有自己独特特性的ECAD系统中。 CAMCAD PCB 转换器支持的组合 建议配置：Windows 2000 或者 XP Professional，800 MHZ 处理器，512MB RAM 17"显示器，1024×768分辨率 Copyright 2004 Router Solutions Incorporated RSI Reserves the right to make changes to its specifications and products without prior notice. CAMCAD is a registered trademark of Router Solutions Incorporated. All rights reserved. RSI recognizes other brand and product names as trademarks or registered trademarks of their respective holders.
标签： Translator_CAMCAD PCB 转换器
上传时间： 2014-12-31
上传用户：wvbxj
This document was developed under the Standard Hardware and Reliability Program (SHARP) TechnologyIndependent Representation of Electronic Products (TIREP) project. It is intended for use by VHSIC HardwareDescription Language (VHDL) design engineers and is offered as guidance for the development of VHDL modelswhich are compliant with the VHDL Data Item Description (DID DI-EGDS-80811) and which can be providedto manufacturing engineering personnel for the development of production data and the subsequent productionof hardware. Most VHDL modeling performed to date has been concentrated at either the component level orat the conceptual system level. The assembly and sub-assembly levels have been largely disregarded. Under theSHARP TIREP project, an attempt has been made to help close this gap. The TIREP models are based upon lowcomplexity Standard Electronic modules (SEM) of the format A configuration. Although these modules are quitesimple, it is felt that the lessons learned offer guidance which can readily be applied to a wide range of assemblytypes and complexities.
上传时间： 2013-11-20
上传用户：pzw421125
针对嵌入式机器视觉系统向独立化、智能化发展的要求，介绍了一种嵌入式视觉系统--智能相机。基于对智能相机体系结构、组成模块和图像采集、传输和处理技术的分析，对国内外的几款智能相机进行比较。综合技术发展现状，提出基于FPGA+DSP模式的硬件平台，并提出智能相机的发展方向。分析结果表明，该系统设计可以实现脱离PC运行，完成图像获取与分析，并作出相应输出。 Abstract: This paper introduced an embedded vision system-intelligent camera ，which was for embedded machine vision systems to an independent and intelligent development requirements. Intelligent camera architecture， component modules and image acquisition， transmission and processing technology were analyzed. After comparing integrated technology development of several intelligent cameras at home and abroad， the paper proposed the hardware platform based on FPGA+DSP models and made clear direction of development of intelligent cameras. On the analysis of the design， the results indicate that the system can run from the PC independently to complete the image acquisition and analysis and give a corresponding output.
上传时间： 2013-11-14
上传用户：无聊来刷下
There are many manufacturers of dot matrix LCD modules. However, most of these displaysare similar. They all have on-board controllers and drivers capable of displaying alpha numericsand a wide variety of other symbols (including Japanese "Katakana" characters). The internaloperation of LCD controller devices is determined by signals sent from a central processing unit(in this case, a CoolRunner-II CPLD).
标签： CoolRunner-II XAPP 904 LCD
上传时间： 2013-12-17
上传用户：haiya2000
