随着电磁阀在工业和日常应用的增多,其功耗越来越被人们所重视。通过对电磁阀驱动电路的研究,设计一套电磁阀节能驱动电路。不仅提高了电磁阀的响应时间,更重要的是降低了功耗,使电磁阀由工作在大电流状态下,变成大电流启动小电流维持的工作状态。减少了由电流过大引起的电磁阀线圈过热,增加了电磁阀的安全性。The power consumption of an electromagnetic valve is drawing increasingly more attentiori as it is widely used in industrial production and daily life. In this study, an energy - saving driving circuit of electromagnetic valves was designed. It can make an electromagnetic valve to start with a high current while work with a low current; thereby the power consumption can be reduced. Besides, it can shorten the response time of an electromagnetic valve and improve the security of the valve.
上传时间： 2022-04-16
上传用户：jimmy950583
超声波换能器作为一种实用的检测手段，能实现声波所携带的信息和电能之间转换。它的性能优良，价格低廉，操作方便，易于调试，因此在工农业生产中发挥着重要的作用。但目前换能器驱动电路的发射频率多为40 kHz，本文针对1 MHz的超声波换能器电路进行了设计，主要介绍了它的发射驱动电路和接收驱动电路的设计方案，并对它们的功能进行了详细地说明。最后搭建实验平台，并对电路的输入、输出模块进行了测试。实验结果表明，换能器电路运行良好，可以为超声波高精度测量领域的应用提供参考。As a practical means of detection, ultrasonic transducer can realize the conversion between theinformation carried by sound wave and electric energy.It has the advantages of excellent performance,low cost, convenient operation and debugging, so plays an important role in industrial and agriculturalproduction.However, the transmitting frequency of the driving circuit for most transducer is 40 kHz.Thecircuit of 1 MHz ultrasonic transducer is designed In this paper. It mainly introduces the emissive drivingcircuit and the receiving circuit design and the detailed function of them. Finally, the experimentalplatform is built, and the circuit of input and output were tested. Experiments show that the transducer＇ s...
上传时间： 2022-04-28
上传用户：yb9018
为解决移相全桥电路驱动及相角控制问题,设计了一种数字控制的移相全桥驱动电路.以TPL521为光耦隔离、IR2110为栅极驱动芯片.由DSP产生PWM信号,经过光耦隔离和逻辑电路后送至IR2110进行相角控制.文章对IR2110驱动电路原理进行分析及参数进行设计,对TMS320F28335进行设置并给出部分代码.实验结果表明：通过TMS320F28335可产生的不同相角的PWM波形,满足了移相全桥对不同相角控制的要求.In order to solve the problem of phase-shifted full-bridge circuit driving and phase angle control,a digitally controlled phaseshifted full-bridge driving circuit was designed. TPL521 optocoupler isolation,IR2110 gate driver chip. PWM signals are generated by the DSP and sent to the IR2110 for phase angle control after optocoupler isolation and logic circuits. This text carries on the analysis to the principle of IR2110 drive circuit and parameter design,set up and give out some code to TMS320F28335. The experimental results show that the PWM waveforms with different phase angles generated by TMS320F28335 can meet the requirements of phase-shifted full-bridge control for different phase angles.
上传时间： 2022-05-03
上传用户：zhanglei193
以STM32F103C8T6为核心,设计了无刷直流电机控制器硬件电路。电路主要包括IR2310构成的PWM驱动电路、IRF3808构成的逆变电路、增量式旋转编码构成的速度反馈电路。控制器具有CAN和RS232通信接口,可与计算机或PLC构成速度或位置伺服系统。利用由xPC目标搭建的半实物仿真平台对PI参数进行整定。测试了控制器的速度伺服响应性能,给定速度为2400rpm时,控制器响应时间为0.32s。实验结果表明,系统工作可靠,稳定性好,响应速度快,可以满足上肢康复机器人的机械臂速度控制性能要求。The hardware circuit of Brushless DC motor controller is designed by taking STM32F103C8T6 as the core,which mainly includes PWM driving circuits made up of IR2310,inverter circuit formed by IRF3808,speed feedback circuit composed of incremental rotary encoder and so on.Speed servo control system or position servo control system can be composed of BLDM controller with computer or PLC through CAN communication interface or RS232 serial communication interface.By using the hardware in the loop simulation platform built by xPC target,the PI parameters are set up.The Speed servo response performance of the controller is tested.When the speed is 2 400 rpm,the response time of the controller is 0...
上传时间： 2022-05-06
上传用户：GGMD
说明： 基于51单片机驱动ADS1115进行AD采集在1602上显示程序源码(Based on 51 single-chip drive diode for water lamp processing, including driving, testing, C file)
上传时间： 2022-06-06
上传用户：yb9018
摘要：本文在分析1GBT的动态开关特性和过流状态下的电气特性的基础上，通过对常规的IGBT推挽驱动电路进行改进，得到了具有良好过流保护特性的IGBT驱动电路。该电路简单，可靠，易用，配合DSP等控制芯片能达到很好的驱动效果Abstract：Based on the studies on the dynamic switching and over-current characteristics of IGBT，this paper makes some improvments to the original push-pull driving circuit，obtains a new IGBT driving circuit which has a good over-current protection function.The circuit is simple，reliable and easy to use.Combined with controlling chips such as DSP it will do a great job in driving applications.关键词：IBGT：开关特性；驱动；过流保护；Key Words:IGBT；switching characteristics；driving:over-current protection
上传时间： 2022-06-21
上传用户：joshau007
PrefaceDuring the past years, there has been a quickly rising interest in radio access technologies for providingmobile as well as nomadic and fixed services for voice, video, and data. The difference indesign, implementation, and use between telecom and datacom technologies is also becoming moreblurred. One example is cellular technologies from the telecom world being used for broadband dataand wireless LAN from the datacom world being used for voice-over IP.Today, the most widespread radio access technology for mobile communication is digital cellular,with the number of users passing 5 billion by 2010, which is more than half of the world’s population.It has emerged from early deployments of an expensive voice service for a few car-borne users,to today’s widespread use of mobile-communication devices that provide a range of mobile servicesand often include camera, MP3 player, and PDA functions. With this widespread use and increasinginterest in mobile communication, a continuing evolution ahead is foreseen.This book describes LTE, developed in 3GPP (Third Generation Partnership Project) and providingtrue 4G broadband mobile access, starting from the first version in release 8 and through the continuingevolution to release 10, the latest version of LTE. Release 10, also known as LTE-Advanced,is of particular interest as it is the major technology approved by the ITU as fulfilling the IMTAdvancedrequirements. The description in this book is based on LTE release 10 and thus provides acomplete description of the LTE-Advanced radio access from the bottom up.Chapter 1 gives the background to LTE and its evolution, looking also at the different standardsbodies and organizations involved in the process of defining 4G. It also gives a discussion of the reasonsand driving forces behind the evolution.Chapters 2–6 provide a deeper insight into some of the technologies that are part of LTE and itsevolution. Because of its generic nature, these chapters can be used as a background not only for LTEas described in this book, but also for readers who want to understand the technology behind othersystems, such as WCDMA/HSPA, WiMAX, and CDMA2000.Chapters 7–17 constitute the main part of the book. As a start, an introductory technical overviewof LTE is given, where the most important technology components are introduced based onthe generic technologies described in previous chapters. The following chapters provide a detaileddescription of the protocol structure, the downlink and uplink transmission schemes, and the associatedmechanisms for scheduling, retransmission and interference handling. Broadcast operation andrelaying are also described. This is followed by a discussion of the spectrum flexibility and the associated
上传时间： 2022-07-07
上传用户：lostxc
创建虚拟驾驶场景Sensor Fusion Using SyntheticRadar and Vision Data ▪ 模拟道路和车辆 ▪ 添加基于统计概率的视觉与雷达传感器▪ 测试传感器融合与目标跟踪 ▪ 可视化传感器覆盖区域, 检测列 表, 目标跟踪列表图形化的驾驶场景设计器driving Scenario Designer ▪ 创建道路与车道线标记 ▪ 添加车辆与行驶轨迹 ▪ 设置车辆尺寸与雷达截面积(RCS)▪ 提供预定义的ADAS场景 ▪ 支持导入OpenDRIVE格式路网文件
上传时间： 2022-07-09
上传用户：默默
