ST7787 芯片的SPEC，比亚迪2.4inchLCM的SPEC。The ST7787 is a single-chip controller/driver for 262K-color, graphic type TFT-LCD. It consists of 720 source line and 320 gate line driving circuits. This chip is capable of connecting directly to an external microprocessor, and accepts Serial Peripheral Interface (SPI), 8-bits/9-bits/16-bits/18-bits parallel interface. Display data can be stored in the on-chip display data RAM of 240x320x18 bits. It can perform display data RAM read/write operation with no external operation clock to minimize power consumption. In addition, because of the integrated power supply circuits necessary to drive liquid crystal, it is possible to make a display system with the fewest components.
上传时间： 2016-09-22
上传用户：woshini123456
After the successful global introduction during the past decade of the second generation (2G) digital mobile communications systems, it seems that the third generation (3G) Universal Mobile Communication System (UMTS) has finally taken off, at least in some regions. The plethora of new services that are expected to be offered by this system requires the development of new paradigms in the way scarce radio resources should be managed. The Quality of Service (QoS) concept, which introduces in a natural way the service differentiation and the possibility of adapting the resource consumption to the specific service requirements, will open the door for the provision of advanced wireless services to the mass market.
标签： the introduction successful generation
上传时间： 2013-12-30
上传用户：qq21508895
ucos2 is a file system for embedded applications which can be used on any media, for which you can provide basic hardware access functions. µ C/FS is a high performance library that has been optimized for minimum memory consumption in RAM and ROM, high speed and versatility. It is written in ANSI C and can be used on any CPU.
标签： which applications can for
上传时间： 2017-01-04
上传用户：偷心的海盗
ucos2 is a file system for embedded applications which can be used on any media, for which you can provide basic hardware access functions. µ C/FS is a high performance library that has been optimized for minimum memory consumption in RAM and ROM, high speed and versatility. It is written in ANSI C and can be used on any CPU.
标签： which applications can for
上传时间： 2017-01-04
上传用户：13517191407
R1EX24xxx series are two-wire serial interface EEPROM (Electrically Erasable and Programmable ROM). They realize high speed, low power consumption and a high level of reliability by employing advanced MNOS memory technology and CMOS process and low voltage circuitry technology. They also have a 128-byte page programming function to make their write operation faster. Note: Renesas Technology鈥檚 serial EEPROM are authorized for using consumer applications such as cellular phone, camcorders, audio equipment. Therefore, please contact Renesas Technology鈥檚 sales office before using industrial applications such as automotive systems, embedded controllers, and meters
标签： Electrically Programmable interface Erasable
上传时间： 2014-01-07
上传用户：xiaohuanhuan
The LN2410SBC is a high performance single board computer based on ARM920T (MMU included). Its ultra low power consumption, various built-in IO ports and support for Linux/WinCE/RTOS make it suitable for many industry applications.
标签： performance computer included single
上传时间： 2013-12-08
上传用户：ljt101007
The software and hardware development fields evolved along separate paths through the end of the 20th century. We seem to have come full circle, however. The previously rigid hardware on which our programs run is softening in many ways. Embedded systems are largely responsible for this softening. These hidden computing systems drive the electronic products around us, including consumer products like digital cameras and personal digital assistants, office automation equipment like copy machines and printers, medical devices like heart monitors and ventilators, and automotive electronics like cruise controls and antilock brakes. Embedded systems force designers to work under incredibly tight time-tomarket, power consumption, size, performance, flexibility, and cost constraints. Many technologies introduced over the past two decades have sought to help satisfy these constraints. To understand these technologies, it is important to first distinguish the underlying embedded systems elements.
标签： development the software hardware
上传时间： 2017-08-15
上传用户：cjf0304
The TJA1040 is an advanced high speed CAN transceiver for use in automotive and general industrial applications. It supports the differential bus signal representation described in the international standard for in-vehicle high speed CAN applications (ISO11898). CAN (Controller Area Network) is the standard protocol for serial in-vehicle bus communication, particularly for Engine Management and Body Multiplexing. The TJA1040 provides a Standby mode, as known from its functional predecessors PCA82C250 and PCA82C251, but with significantly reduced power consumption. Besides the excellent low-power behavior the TJA1040 offers several valuable system improvements. Highlights are the absolute passive bus behavior if the device is unpowered as well as the excellent EMC performance.
标签： CAN
上传时间： 2015-03-23
上传用户：Yuan Lo
Smart Grids provide many benefits for society. Reliability, observability across the energy distribution system and the exchange of information between devices are just some of the features that make Smart Grids so attractive. One of the main products of a Smart Grid is to data. The amount of data available nowadays increases fast and carries several kinds of information. Smart metres allow engineers to perform multiple measurements and analyse such data. For example, information about consumption, power quality and digital protection, among others, can be extracted. However, the main challenge in extracting information from data arises from the data quality. In fact, many sectors of the society can benefit from such data. Hence, this information needs to be properly stored and readily available. In this chapter, we will address the main concepts involving Technology Information, Data Mining, Big Data and clustering for deploying information on Smart Grids.
标签： Processing Cities Smart Data in
上传时间： 2020-05-23
上传用户：shancjb
Smart Grids provide many benefits for society. Reliability, observability across the energy distribution system and the exchange of information between devices are just some of the features that make Smart Grids so attractive. One of the main products of a Smart Grid is to data. The amount of data available nowadays increases fast and carries several kinds of information. Smart metres allow engineers to perform multiple measurements and analyse such data. For example, information about consumption, power quality and digital protection, among others, can be extracted. However, the main challenge in extracting information from data arises from the data quality. In fact, many sectors of the society can benefit from such data. Hence, this information needs to be properly stored and readily available. In this chapter, we will address the main concepts involving Technology Information, Data Mining, Big Data and clustering for deploying information on Smart Grids.
标签： Processing Cities Smart Data
上传时间： 2020-05-25
上传用户：shancjb
