虫虫首页|资源下载|资源专辑|精品软件
登录|注册

Voltage-sourced

  • 基于IR2101最大功率跟踪逆变器的设计

    为解决直流逆变交流的问题,有效地利用能源,让电源输出最大功率,设计了高性能的基于IR2101最大功率跟踪逆变器,并以SPMC75F2413A单片机作为主控制器。高电压、高速功率的MOSFET或IGBT驱动器IR2101采用高度集成的电平转换技术,同时上管采用外部自举电容上电,能够稳定高效地驱动MOS管。该逆变器可以实现DC/AC的转换,最大功率点的跟踪等功能。实际测试结果表明,该逆变器系统具有跟踪能力强,稳定性高,反应灵敏等特点,该逆变器不仅可应用于普通的电源逆变系统,而且可应用于光伏并网发电的逆变系统,具有广泛的市场前景。 Abstract:  To solve the problem of DC-AC inverter, and to utilize solar energy more efficiently, the design of maximum power point tracking inverter based on IR2101 was achieved with a high-performance, which can make the system output power maximum. SPMC75F2413A was adopted as main controller. IR2101 is a high voltage, high speed power MOSFET and IGBT driver. It adopted highly integrated voltage level transforming technology, and an external bootstrap capacitor was used, which could drive MOS tube efficiently and stably. Many functions are achieved in the system, such as DC/AC conversion, maximun power point tracking, etc. The actual test result shows that the inverter system has characteristics of strong tracking ability, high stability and reacting quickly. The design can not only be used in ordinary power inverter system, but also be used in photovoltaic power inverter system. The design has certain marketing prospects

    标签: 2101 IR 最大功率跟踪 逆变器

    上传时间: 2013-11-17

    上传用户:lliuhhui

  • 基于开关电容技术的锁定放大器设计

    锁定放大是微弱信号检测的重要手段。基于相关检测理论,利用开关电容的开关实现锁定放大器中乘法器的功能,提出开关电容和积分器相结合以实现相关检测的方法,并设计出一种锁定放大器。该锁定放大器将微弱信号转化为与之相关的方波,通过后续电路得到正比于被测信号的直流电平,为后续采集处理提供方便。测量数据表明锁定放大器前级可将10-6 A的电流转换为10-1 V的电压,后级通过带通滤波器级联可将信号放大1×105倍。该方法在降低噪声的同时,可对微弱信号进行放大,线性度较高、稳定性较好。 Abstract:  Lock-in Amplifying(LIA)is one of important means for weak signal detection. Based on cross-correlation detection theory, switch in the swithched capacitor was used as multiplier of LIA, and a new method of correlation detection was proposed combining swithched capacitor with integrator. A kind of LIA was designed which can convert the weak signal to square-wave, then DC proportional to measured signal was obtained through follow-up conditioning circuit, providing convenience for signal acquisition and processing. The measured data shows that the electric current(10-6 A) can be changed into voltage(10-1 V) by LIA, and the signal is magnified 1×105 times by cascade band-pass filter. The noise is suppressed and the weak signal is amplified. It has the advantages of good linearity and stability.

    标签: 开关电容 锁定放大器

    上传时间: 2013-11-28

    上传用户:黑漆漆

  • Wide-input dc/dc modules offer

    When a system designer specifies a nonisolated dc/dc powermodule, considering the needed input voltage range isequally as important as considering the required performanceattributes and features. Generally, nonisolated moduleshave either a narrow or a wide input voltage range. Narrowinputmodules typically have a nominal input voltage of3.3, 5, or 12 V. For systems that operate from a tightlyregulated input bus—such as those that do not use batterybackup—a narrow-input module is often adequate sincethe input remains fairly stable.Offering greater flexibility, wide-input modules operatewithin a range of 7 to 36 V, which includes the popular12- or 24-V industrial bus. This enables a single module tobe used for generating multiple voltages. These modulesare ideal for industrial controls, HVAC systems, vehicles,medical instrumentation, and other applications that usea loosely regulated distribution bus. In addition, systemspowered by a rectifier/battery charger with lead-acidbattery backup almost always require wide-input modules.System designers who choose power supplies may wantto take a close look at the latest generation of wide-inputdc/dc modules.

    标签: Wide-input modules offer dc

    上传时间: 2014-12-24

    上传用户:dragonhaixm

  • 基于8098单片机的SPWM变频调速系统

      数字控制的交流调速系统所选用的微处理器、功率器件及产生PWM波的方法是影响交流调速系统性能好坏的直接因素。在介绍了正弦脉宽调制(SPWM)技术的基础上,设计了一种以8098单片机作为控制器,以智能功率模块IPM为开关器件的变频调速系统。通过软件编程,产生正弦脉冲宽度调制波形来控制绝缘栅双极晶体管的导通和关断,从而达到控制异步电动机转速的目的。实验结果表明,该系统可调频率调电压,稳定度高,调速范围宽,具有较强的实用价值   Abstract:   AC variable speed with digital control systems used microprocessors, power devices and generate PWM wave is the direct factors of affecting the performance AC speed regulation system. On the basis of introducing the sinusoidal pulse width modulation (SPWM) technology,this paper designed variable speed system which used 8098 as a controller, intelligent power module IPM as switching device. Through software programming, resulting in sinusoidal pulse width modulation waveform to control the insulated gate bipolar transistor turn on and off, so as to achieve the purpose of speed control of induction motors. Experimental results show that the system can adjust frequency modulation voltage, high stability, wide speed range, has a strong practical value.  

    标签: 8098 SPWM 单片机 变频调速系统

    上传时间: 2013-11-14

    上传用户:ynwbosss

  • C8051F020

    HIGH SPEED 8051 μC CORE - Pipe-lined Instruction Architecture; Executes 70% of Instructions in 1 or 2 System Clocks - Up to 25MIPS Throughput with 25MHz System Clock - 22 Vectored Interrupt Sources MEMORY - 4352 Bytes Internal Data RAM (256 + 4k) - 64k Bytes In-System Programmable FLASH Program Memory - External Parallel Data Memory Interface – up to 5Mbytes/sec DIGITAL PERIPHERALS - 64 Port I/O; All are 5V tolerant - Hardware SMBusTM (I2CTM Compatible), SPITM, and Two UART Serial Ports Available Concurrently - Programmable 16-bit Counter/Timer Array with 5 Capture/Compare Modules - 5 General Purpose 16-bit Counter/Timers - Dedicated Watch-Dog Timer; Bi-directional Reset CLOCK SOURCES - Internal Programmable Oscillator: 2-to-16MHz - External Oscillator: Crystal, RC, C, or Clock - Real-Time Clock Mode using Timer 3 or PCA SUPPLY VOLTAGE ........................ 2.7V to 3.6V - Typical Operating Current: 10mA @ 25MHz - Multiple Power Saving Sleep and Shutdown Modes 100-Pin TQFP (64-Pin Version Available) Temperature Range: –40°C to +85°C

    标签: C8051F020

    上传时间: 2013-10-12

    上传用户:lalalal

  • 基于89C52的二极管特性测试器的设计

      利用单片机具有的智能程序控制的特点,设计了基于STC89C52单片机的"二极管特性测试器",可对二极管一般特性进行快速测试。通过稳定线性电流源给二极管加载恒定电流,然后由高精度模数转换器测试其压降,以此为基础可判断二极管好坏、检测二极管极性和测试二极管伏安特性等,避免了用万用表测试只能测得极性而不知其特性这一缺点。可用于电子设计制作过程中对二极管进行快速测试,以确定被测二极管是否满足电路的设计要求。   Abstract:   By making good use of the intelligent control function of the Micro Controller Unit (MCU), the diode trait tester was designed based on the STC89C52,which could be used to test the trait of a diode rapidly. By loading constant current to diode through the stable linear current source, and measuring the voltage drop of the diode by high-precision analogue-to-digital converter (ADC), it can judge whether the diode is good or not, distinguish the polarity of the diode, and test the trait that the diode, which can avoid the fault of using a multimeter can only measure the polarity but not the trait. This device can be used to test the trait of a diode quickly,and to make sure that whether a diode can be used in the electronic design or not.

    标签: 89C52 二极管 特性测试器

    上传时间: 2013-11-12

    上传用户:assef

  • 常用PIC系列单片机速查表

    常用PIC系列产品特性一览表 器件  存储器 类型 字数 EEPROM 数据 存储器 RAM I/O 引脚数  ADC (-Bit) 比较 器 运 放 定时器/WDT 串行接口 最高 速度 MHz 封装 PDIP /SOIC ICSP CCP / ECCP 输出电流 (per I/O) 振荡器 频率 (MHz) 参考 电压 VREF LCD PWM 堆栈 深度 High Voltage Wakeup On Change PIC16C432 OTP 2048x14   128 12   2  1-8bit/1-WDT   20 20 √   25 mA  4       0 0 PIC16C433 OTP 2048x14   128 6 4/8    1-8bit/1-WDT   10 18 √   25 mA         0 0 PIC16C505 OTP 1024x12   72 12      1-8bit/1-WDT   20 14 √   25 mA  4       0 0 PIC16C54 OTP 512x12   25 12      1-8bit/1-WDT   20 18/20    20 mA          0 0 PIC16C54A OTP 512x12   25 12      1-8bit/1-WDT   20 18/20    20 mA         0 0 PIC16C54C OTP 512x12   25 12      1-8bit/1-WDT   40 18/20    20 mA          0 0 PIC16C55 OTP 512x12   24 20      1-8bit/1-WDT   20 28    20 mA          0 0 PIC16C554 OTP 512x14   80 13      1-8bit/1-WDT   20 18/20 √   25 mA          0 0 PIC16C558 OTP 2048x14   128 13      1-8bit/1-WDT   20 18/20 √   25 mA          0 0 PIC16C55A OTP 512x12   24 20      1-8bit/1-WDT   40 28    20 mA          0 0 PIC16C56 OTP 1024x12   25 12      1-8bit/1-WDT   20 18/20    20 mA          0 0 PIC16C56A OTP 1024x12   25 12      1-8bit/1-WDT   40 18/20    20 mA         0 0 PIC16C57 OTP 2048x12   72 20      1-8bit/1-WDT   20 28    20 mA          0 0 PIC16C57C OTP 2048x12   72 20      1-8bit/1-WDT   40 28    20 mA          0 0 PIC16C58B OTP 2048x12   73 12      1-8bit/1-WDT   40 18/20    20 mA          0 0 PIC16C620 OTP 512x14   80 13   2  1-8bit/1-WDT   20 18/20 √   25 mA   √      0 0 PIC16C620A OTP 512x14   96 13   2  1-8bit/1-WDT   40 18/20 √   25 mA   √      0 0 PIC16C621 OTP 1024x14   80 13   2  1-8bit/1-WDT   20 18/20 √   25 mA    √      0 0 PIC16C621A OTP 1024x14   96 13   2  1-8bit/1-WDT   40 18/20 √   25 mA   √      0 0 PIC16C622 OTP 2048x14   128 13   2  1-8bit/1-WDT   20 18/20 √   25 mA   √      0 0 PIC16C622A OTP 2048x14   128 13   2  1-8bit/1-WDT   40 18/20/40 √   25 mA   √      0 0 PIC16C62A OTP 2048x14   128 22      2-8bit/1-16bit/1-WDT I²C/ SPI 20 28/ √ 1 25 mA     1   0 0 PIC16C62B OTP 2048x14   128 22      2-8bit/1-16bit/1-WDT I²C /SPI 20 28 √ 1 25 mA     1   0 0 PIC16C63 OTP 4096x14   192 22      2-8bit/1-16bit/1-WDT USART/I²C /SPI 20 28 √ 2 25 mA     2   0 0 PIC16C63A OTP 4096x14   192 22      2-8bit/1-16bit/1-WDT USART/I²C/SPI 20 28 √ 2 25 mA     2   0 0 PIC16C642 OTP 4096x14   176 22   2  1-8bit/1-WDT   20 28 √   25 mA   √      0 0 PIC16C64A OTP 2048x14   128 33      2-8bit/1-16bit/1-WDT I²C /SPI 20 40/44 √ 1 25 mA     1   0 0 PIC16C65A OTP 4096x14   192 33      2-8bit/1-16bit/1-WDT USART/I²C/SPI 20 40/44 √ 2 25 mA     2   0 0 PIC16C65B OTP 4096x14   192 33      2-8bit/1-16bit/1-WDT USART/I²C/SPI 20 40/44 √ 2 25 mA     2   0 0 PIC16C66 OTP 8192x14   368 22      2-8bit/1-16bit/1-WDT USART/I²C/SPI 20 28 √ 2 25 mA     2   0 0 PIC16C662 OTP 4096x14   176 33   2  1-8bit/1-WDT   20 40/44 √   25 mA   √      0 0 PIC16C67 OTP 8192x14   368 33      2-8bit/1-16bit/1-WDT USART/I²C /SPI 20 40/44 √ 2 25 mA     2   0 0 PIC16C71 OTP 1024x14   36 13 4/8    1-8bit/1-WDT   20 18 √   25 mA         0 0 PIC16C710 OTP 512x14   36 13 4/8    1-8bit/1-WDT   20 18/20 √   25 mA         0 0 PIC16C711 OTP 1024x14   68 13 4/8    1-8bit/1-WDT   20 18/20 √   25 mA         

    标签: PIC 单片机 速查

    上传时间: 2013-10-12

    上传用户:xjy441694216

  • 基于单片机的颜色自适应识别电路

      为解决电致变色器件的颜色变化受外界环境颜色控制的问题,设计了一种基于单片机的便携式颜色自适应识别电路。与传统颜色识别电路相比较,该电路利用数字式的颜色传感器来获取外界环境颜色,产生的数字颜色信号易于单片机进行处理。在电路中,下位机部分主要负责获取电致变色器件变色参数及控制电致变色器件的颜色变化;而上位机部分主要负责把下位机获取的电致变色器件变色参数进行电压到颜色的曲线拟合,并通过蓝牙通信把拟合曲线参数传递给下位机。结果表明,该电路能自动根据环境颜色提供-4~4 V范围步进为0.1 V的电压来驱动电致变色器件的颜色显示,与传统的颜色识别电路设计相比,识别的精度和速度都得到了明显改善。   Abstract:   In this paper, a portable adaptive circuit for color identification(PACCI) based on MCU was designed. Compared to the traditional color identification circuit, the PACCI adopts digital sensor to detect the color data from external environment and further generate digital color data, which can be processed easily by MCU. In PACCI, the slave is mainly responsible for detecting the color parameters of the corresponding elcreochromic device and further driving it. For the master, which is mainly responsible for the color curve fitting based on the parameters of the electrochromic device, and transmits the fitting parameters to the slave through the bluetooth device. The results show that the PACCI can provide the basis voltage range from -4V to 4V automatically based on the colors of external environment with step as 0.1V to drive the corresponding electrochromic device. Compared to the traditional color recognition circuit, the recognition accuracy and speed of PACCI have been improved significantly.

    标签: 单片机 识别电路

    上传时间: 2013-11-09

    上传用户:franktu

  • 基于MSP430F1611单片机的音频信号分析仪设计

      为了使音频信号分析仪小巧可靠,成本低廉,设计了以2片MSP430F1611单片机为核心的系统。该系统将音频信号送入八阶巴特沃兹低通滤波器,对信号进行限幅放大、衰减、电平位移、缓冲,并利用一单片机负责对前级处理后的模拟信号进行采样,将采集得到的音频信号进行4 096点基2的FFT计算,并对信号加窗函数提高分辨率,另一单片机负责对信号的分析及控制显示设备。此设计精确的测量了音频信号的功率谱、周期性、失真度指标,达到较高的频率分辨率,并能将测量结果通过红外遥控器显示在液晶屏上。   Abstract:   o make the audio signal analyzer cheaper, smaller and more reliable, this system sends the audio signal to the eight-order butterworth filter, and then amplifies, attenuates, buffers it in a limiting range, transfers the voltage level of the signal before utilizing two MSP430F1611 MCU to realize the audio analysis. One is charged for sampling and dealing with the processed audio signal collected by the 4096 point radix-2 FFT calculation and imposes the window function to improve the frequency resolution. The other one controls the display and realizes the spectrum, periodicity, power distortion analysis in high resolution which is displayed in the LCD screen through the infrared remote control.

    标签: F1611 1611 430F MSP

    上传时间: 2013-12-11

    上传用户:jasonheung

  • 基于MAX7219的LED数码显示驱动电路设计

      现有基于MAX7219芯片的数码管驱动电路只适用于小尺寸LED,为扩展其使用范围,在介绍动态显示芯片MAX7219功能的基础上,提出了一个基于该芯片的8位高亮度8英寸数码管驱动电路。电路保留了MAX7219芯片的功能强大、编程简单等优点,通过74LS273锁存器和ULN2803达林顿驱动器,实现了对任意大尺寸数码管提供较高电压和电流驱动的静态显示,并亮度可调。   Abstract:   The existing display-driving circuit based on MAX7219 was only applicable to small-size LED. To expand its use, based on the function introduction of dynamic display chip MAX7219, a display-driving circuit for high-brightness 8-bit LED with the size of 8-inch was proposed. The advantages of MAX7219 were retained, such as powerful function and simple programming. Static display with adjustable brightness for large-size LED with higher voltage and current was achieved with the help of 74LS273 and ULN2803.

    标签: 7219 MAX LED 数码显示

    上传时间: 2013-10-23

    上传用户:31633073