虫虫首页|资源下载|资源专辑|精品软件
登录|注册

Storage

  • 基于微网的光伏变流器系统设计

    光伏发电是未来新能源发电重要方向之一,而光伏变流器是光伏发电系统的核心。介绍一种基于微网理念的光伏变流器设计。以该变流器为核心的光伏发电系统可以看做一个小型的微网系统。该系统能根据外部电网情况,工作于并网模式和离网模式。介绍了该系统的各个组成部件的设计以及变流器主电路部分器件的选型。最后,由实验样机进行测试。试验结果验证了电路拓扑结构及控制方案的可行性,也说明了系统参数设计方法的正确性。 Abstract:  Solar Photovoltaic generation is an important direction of new energy power generation in the future,while photovoltaic converter is the core of photovoltaic generation system. This paper deals with a study on photovoltaic inverter based on the concept of microgrid. This paper describes a system whose core component is the photovoltaic inverter,can work on grid-connected mode or run independently according to the external situation. The paper simply describes the main components of the system. At last,the prototype was produced and tested. Test result has proved feasibility of circuit topology structure and controlling scheme and shown correctness of system parameters.Key words: PV inverter; microgrid; off-grid; Storage battery

    标签: 光伏 变流器 系统设计

    上传时间: 2014-12-24

    上传用户:Shaikh

  • 基于单片机系统的(24,16)循环码编码、译码方案

      在理论分析循环码编码和译码基本原理的基础上,提出了基于单片机系统的(24,16)循环码软件实现编码、译码的方案。仿真结果表明(24,16)循环码能有效地克服来自通讯信道的干扰,保证数据通信的可靠及系统的稳定,使误码率大幅度降低。本论文对(24,16)循环码的研究结果表明,可以有效地降低错误概率和提高系统的吞吐量,实现纠错仅需要在接收端增加有限的存储空间和计算复杂度,具有一定的实用价值。   Abstract:   Based on analyzing the theory of encoding and decoding of cyclic code, this paper showed the schemes of encoding and decoding of(24,16)cyclic code by the software and based on microcontroller. Simulation results show that using (24,16) cyclic codes can effectively overcome the interference from communication channel, ensure the reliability and stability of data communication systems, and reduce the bit error rate greatly. The results of this paper show that by using the (24,16) cyclic code, the error rate can be reduced and the system throughput can be improved. Meanwhile, the system only needs to enlarge limited Storage space and computation the complexity at the receiving end to realize error correction. Thus the (24,16) cyclic code has a practical value.  

    标签: 24 16 单片机系统 循环码

    上传时间: 2013-11-09

    上传用户:gaoliangncepu

  • 基于MSP430单片机的智能水位计设计

      为解决我国水位监测野外条件下长期无人看守的问题,研制开发了基于MSP430单片机的智能水位计。从其组成到各功能分别进行了详细的介绍,该智能水位计不仅实现了水位数据的实时监测、记录和定期采集等多种工作模式,而且提高了水位监测精度,实现了水位监测的智能化。   Abstract:   In order to solve the problems of long-term unmanned observation in the field water monitoring,an intelligence water-level meter based on MSP430 is developed composition and every function moduce of the water level meter was introduced in detail. It not only realizes water level data collection and Storage, regularly gathering and so on, but also improves the water-level precision , finally realizes the intelligence.  

    标签: MSP 430 单片机 水位计

    上传时间: 2013-11-17

    上传用户:417313137

  • 基于PIC18F1320微控制器的信号采集系统

      便携式信号采集在机器健康诊断系统中有较高的应用价值。机器健康诊断的信号特点是包括低频信号。本文研究是为了实现简易而且低成本的低频便携式信号采集。以Microchip公司单片机PIC18F1320为核心设计信号采集电路,实现了信号的采集和保存。系统采用串行电可擦除芯片24LC32A保存数据,经过有线通信,信号数据由串行口通过MAX232芯片输送到微型计算机接收和保存,最后绘制出信号波形。 微型计算机程序采用Visual Basic编程。研究成功采样频率为3 kHz的复杂信号,证明该方案符合设计要求。   Abstract:   Portable signal acquisition is useful in machine health monitoring systems. The signal characteristics of machine health monitoring includes low frequency signals. The goal of this study is to realize simple, inexpensive and portable low frequency signal sampling. This paper provides the project of signal acquisition system design based on PIC18F1320 microcontroller manufactured by the Microchip Technology Incorporation to achieve signal sampling and Storage. The system adopted EEPROM 24LC32A to store the signal data. The microcomputer received data via wired link with the MAX232 IC through the serial port. The microcomputer program, programmed in Visual Basic, received the data, stored it and plotted the signal. The study successfully samples 3kHz complicated signals and thus meets the design requirement.

    标签: F1320 1320 PIC 18F

    上传时间: 2013-11-18

    上传用户:moerwang

  • 基于C8051F020和Zigbee的汽车测试系统设计

    以C8051F020为核心处理器,设计无线传感器网络数据采集系统。系统采用SZ05-ADV型无线通讯模块组建Zigbee无线网络,结合嵌入式系统的软硬件技术,完成终端节点的8路传感器信号的数据采集。现场8路信号通过前端处理后,分别送入C8051F020的12位A/D转换器进行转换。经过精确处理、存储后的现场数据,通过Zigbee无线网络传送到上位机,系统可达到汽车试验中无线测试的目的。 Abstract:  This paper designs a wireless sensor network system for data acquisition with C8051F020 as core processors.The system used SZ05-ADV wireless communication module,set up a Zigbee wireless network, combined with hardware and software technologies of embedded systems,completed the end-node 8-locale sensor signal data acquisition.Eight locale signals were sent separately into the 12-bit ADC of C8051F020 for conversion through front treatment.After accurate processing and Storage,the locale data was transmitted to the host computer through Zigbee wireless.The system achieves the purpose of wireless testing in vehicle trial.

    标签: C8051F020 Zigbee 汽车测试 系统设计

    上传时间: 2013-11-23

    上传用户:dsgkjgkjg

  • 单片机P0口的片外数据存储器扩展

    单片机作为一种微型计算机,其内部具有一定的存储单元(8031除外),但由于其内部存储单元及端口有限,很多情况下难以满足实际需求。为此介绍一种新的扩展方法,将数据线与地址线合并使用,通过软件控制的方法实现数据线与地址线功能的分时转换,数据线不仅用于传送数据信号,还可作为地址线、控制线,用于传送地址信号和控制信号,从而实现单片机与存储器件的有效连接。以单片机片外256KB数据存储空间的扩展为例,通过该扩展方法,仅用10个I/O端口便可实现,与传统的扩展方法相比,可节约8个I/O端口。 Abstract:  As a micro-computer,the SCM internal memory has a certain units(except8031),but because of its internal Storage units and the ports are limited,in many cases it can not meet the actual demand.So we introduced a new extension method,the data line and address lines combined through software-controlled approach to realize the time-conversion functions of data lines and address lines,so the data lines not only transmited data signals,but also served as address lines and control lines to transmit address signals and control signals,in order to achieve an effective connection of microcontroller and memory chips.Take microcontroller chip with256KB of data Storage space expansion as example,through this extension method,with only10I/O ports it was achieved,compared with the traditional extension methods,this method saves8I/O ports.

    标签: 单片机 P0口 数据存储器 扩展

    上传时间: 2014-12-26

    上传用户:adada

  • 基于ATmega16的简易示波器设计

    介绍了以AVR单片机ATmega16为核心,采用前端信号调理电路、程控增益放大器以及波形显示LCD(GDM12864A)实现的一个简易示波器。并给出该系统设计的硬件和软件设计方案。 Abstract:  Abstract:This paper introduces an easy digital Storage oscilloscope based on the AVR microcontroller ATmega16,especially emphasizes on the software design and the hardware design which contains signal processing circuit,gain-programmed amplifier circuit and LCD’s interface circuit and so on.

    标签: ATmega 16 简易示波器

    上传时间: 2013-10-12

    上传用户:ccccccc

  • 基于C8051F060的数据采集存储系统的设计

    介绍一种基于C8051F060单片机和NAND Flash的数据采集存储系统,该系统可实现3路信号采样,每路采样率为5KS/s,通过异步串行通信接口实现数据传输。并详细说明系统的软件设计。 Abstract:  An acquisition and Storage system based on C8051F060and NAND Flash is designed in this paper.The system is used to sample three-channel of signal,5KSPS each channel,and can upload data to test bench through UART(Universal Asynchronous Receiver/Transmitter).The software design is discussed in detail.

    标签: C8051F060 数据采集 存储系统

    上传时间: 2013-10-11

    上传用户:Jesse_嘉伟

  • 基于MS5534B的微功耗气压数据采集

    气压是气象监测中的一个重要参数,提出了一种气压数据采集模块设计方案,该模块采用数字气压传感器MS5534B、MSP430单片机MSP430F2272和带实时时钟(RTC)64 KB铁电存储器。通过低功耗软件设计方法以微安级整体平均功耗实现了气压数据的采集和存储,适合电池供电的连续高精度气压采集应用。给出了模块的软硬件设计以及MS5534B的性能指标和使用经验。 Abstract:  Air pressure is an important parameter in weather monitor.This paper futs forward a new design scheme of low power-air pressure data acquisition module.The module uses a digital output barometer sensor MS5534B,MSP430 microcontroller MSP430F2272 and integrated RTC 64KB FRAM,precision air pressure measurement and Storage chip.Another point of this module is low power consumption, so it is well suited for battery powered air pressure data acquisition applications. At the same time,the software and hardware deign of module is presented,And the speciaties and use notices of MS5534B are given.

    标签: 5534B 5534 MS 微功耗

    上传时间: 2014-12-26

    上传用户:drink!

  • 基于8051F330的音频信号发生器的设计

     MMC/SD卡以其优越的性能,在单片机嵌入式设备中得到广泛应用。将MMC/SD卡作为外部掉电存储介质应用于音频信号发生器中,通过8051F330单片机上的SPI接口,实现单片机—MMC/SD卡的存储扩展,设计了此硬件平台上的MMC/SD卡的单片机驱动程序,并给出了相应的程序代码,满足音频信号发生器的大容量存储要求。 Abstract:  MMC/SD card is more and more widely used in the single chip embedded devices for their excellent performances.This article introduces the application of MMC/SD card as the external power down Storage medium in audio signal generator. The extension technology especially for Storage of single chip-MMC/SD card via SPI interfaces in 8051F330 single chip, including designs single chip drive program of MMC/SD card based on hardware platform,and also gives the key coding of the program. The implementation of big capacity Storage is meaningful in audio signal generator.

    标签: 8051F330 音频信号 发生器

    上传时间: 2014-12-26

    上传用户:黄华强