DESCRIPTION The Texas Instruments MSP430 family of ultra-low-power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 1 μs. The MSP430G2x13 and MSP430G2x53 series are ultra-low-power mixed signal microcontrollers with built-in 16- bit timers, up to 24 I/O capacitive-touch enabled pins, a versatile analog comparator, and built-in communication capability using the universal serial communication interface. In addition the MSP430G2x53 family members have a 10-bit analog-to-digital (A/D) converter. For configuration details see Table 1. Typical applications include low-cost sensor SYSTEMS that capture analog signals, convert them to digital values, and then process the data for display or for transmission to a host system.
上传时间： 2018-12-25
上传用户：ygyh
AEC-Q100 qualified • 12 V and 24 V battery SYSTEMS compliance • 3.3 V and 5 V logic compatible I/O • 8-channel configurable MOSFET pre-driver – High-side (N-channel and P-channel MOS) – Low-side (N-channel MOS) – H-bridge (up to 2 H-bridge) – Peak & Hold (2 loads) • Operating battery supply voltage 3.8 V to 36 V • Operating VDD supply voltage 4.5 V to 5.5 V • All device pins, except the ground pins, withstand at least 40 V • Programmable gate charge/discharge currents for improving EMI behavior
标签： configurable Automotive pre-driver suitable channel SYSTEMS MOSFET fully High side
上传时间： 2019-03-27
上传用户：guaixiaolong
Description The L9352B is an integrated quad low-side power switch to drive inductive loads like valves used in ABS SYSTEMS. Two of the four channels are current regulators with current range from 0 mA to 2.25 A. All channels are protected against fail functions. They are monitored by a status output.
标签： L9352B
上传时间： 2019-03-27
上传用户：guaixiaolong
关于齿隙辨识必备论文参考（它的英文文献名字：Observer-based Compensation Control of Servo SYSTEMS with Backlash），有预补偿，伺服控制系统介绍，观测器设计等。
上传时间： 2019-05-25
上传用户：峰峰学长
Second-Order Consensus in Multiagent SYSTEMS via Distributed Sliding Mode Control
上传时间： 2019-07-24
上传用户：sjjy0220
Optimal Guaranteed Cost Sliding-Mode Control of Interval Type-2 Fuzzy Time-Delay SYSTEMS
上传时间： 2019-07-24
上传用户：sjjy0220
Abstract—In the future communication applications, users may obtain their messages that have different importance levels distributively from several available sources, such as distributed storage or even devices belonging to other users. This scenario is the best modeled by the multilevel diversity coding SYSTEMS (MDCS). To achieve perfect (information-theoretic) secrecy against wiretap channels, this paper investigates the fundamental limits on the secure rate region of the asymmetric MDCS (AMDCS), which include the symmetric case as a special case. Threshold perfect secrecy is added to the AMDCS model. The eavesdropper may have access to any one but not more than one subset of the channels but know nothing about the sources, as long as the size of the subset is not above the security level. The question of whether superposition (source separation) coding is optimal for such an AMDCS with threshold perfect secrecy is answered. A class of secure AMDCS (S-AMDCS) with an arbitrary number of encoders is solved, and it is shown that linear codes are optimal for this class of instances. However, in contrast with the secure symmetric MDCS, superposition is shown to be not optimal for S-AMDCS in general. In addition, necessary conditions on the existence of a secrecy key are determined as a design guideline.
标签： Fundamental Limits Secure Class on of
上传时间： 2020-01-04
上传用户：kddlas
shp 文件修复工具（Shape Checker），解决由于dbf文件和shp文件不一致导致打不开的问题.shape文件修复工具免费下载 由ESRI开发，一个ESRI（Environmental SYSTEMS Research Institute)的shape文件包括一个主文件，一个索引文件，和一个dBASE表，其中主文件的后缀就是.shp。
标签： shape文件修复工具
上传时间： 2020-03-19
上传用户：sun961920936
High-Speed, Low-Power Dual Operational Amplifier The AD826 features high output current drive capability of 50 mA min per amp, and is able to drive unlimited capacitive loads. With a low power supply current of 15 mA max for both amplifiers, the AD826 is a true general purpose operational amplifier. The AD826 is ideal for power sensitive applications such as video cameras and portable instrumentation. The AD826 can operate from a single +5 V supply, while still achieving 25 MHz of band width. Furthermore the AD826 is fully specified from a single +5 V to ±15 V power supplies. The AD826 excels as an ADC/DAC buffer or active filter in data acquisition SYSTEMS and achieves a settling time of 70 ns to 0.01%, with a low input offset voltage of 2 mV max. The AD826 is available in small 8-lead plastic mini-DIP and SO packages.
上传时间： 2020-04-19
上传用户：su1254
PRODUCT DESCRIPTION The AD810 is a composite and HDTV compatible, current feedback, video operational amplifier, ideal for use in SYSTEMS such as multimedia, digital tape recorders and video cameras. The 0.1 dB flatness specification at bandwidth of 30 MHz (G = +2) and the differential gain and phase of 0.02% and 0.04° (NTSC) make the AD810 ideal for any broadcast quality video system. All these specifications are under load conditions of 150 Ω (one 75 Ω back terminated cable). The AD810 is ideal for power sensitive applications such as video cameras, offering a low power supply current of 8.0 mA max. The disable feature reduces the power supply current to only 2.1 mA, while the amplifier is not in use, to conserve power. Furthermore the AD810 is specified over a power supply range of ±5 V to ±15 V.
上传时间： 2020-04-19
上传用户：su1254
