本设计介绍了一种基于STM32单片机控制的智能水杯,可利用插口式电源或无线充电底座为加热器提供能量,并在达到某种饮品所需温度时进行保温。水杯内置充电电池,可选用USB接口或无线充电。在水杯内部设置无线模块,用户利用手机App与水杯进行匹配进行加热操作,加热完后水杯会通过手机App和液晶显示屏实时反馈液体温度,通过指示灯显示电量情况等,给用户进行提醒。该智能水杯设计创新,实用价值较高。This paper introduces an intelligent water cup based by STM32 microcontroller,it can provide Energy for the heater by socket type power supply or wireless charging base,and hold temperature needed for some kind of drink.Builtedin rechargeable battery,water cup can use USB or wireless charging.The wireless module is set up inside it,and customers can use mobile App to match and heat.After heating,water cup feeds back liquid temperature through the mobile App,and then displays on LCD,reminds users through the indicator light.The intelligent water cup is designed innovatively and has high practical value.
上传时间： 2022-03-28
上传用户：
在传统智能小车驱动电路设计中,较多考虑使用直流电机还是步进电机,电机功率、能耗等性能参数。使用具有armCortexM4内核的STM32嵌入式平台控制四轮的4个直流电机。文章基于PWM技术及PID算法,对四轮进行精准地速度、转向及启停控制,实验表明此小车具有优越各种地形适应能力。In the traditional intelligent car drive circuit design,DC motor or stepping motor,motor power,Energy consumption and other performance parameters are considered.The four DC motors with four wheels are controlled by STM32 embedded platform with arm Cortex M4 kernel.Based on the PWM technology and PID algorithm,the accurate ground speed,steering,and start-stop control of the four wheels are carried out.The experiment shows that the vehicle has the superior adaptability to all kinds of terrains.
上传时间： 2022-04-02
上传用户：
在全球气候变暖和石油资源短缺的形势下,推动新能源汽车的发展将成为汽车行业一种新的发展方向。在大力发展新能源电动汽车行业的同时还应兼顾电动汽车充电设施的发展,因此对电动汽车充电桩的设计与研究显得十分必要。对电动汽车直流充电桩的硬件系统进行设计,主要的硬件电路包括安全监测电路、总压采集电路、温湿度检测电路、语音电路。软件包括主要流程图和温湿度检测流程图。Under the situation of global warming and shortage of petroleum resources,promoting the development of new Energy vehicles will become a new development direction for the automotive industry.While vigorously developing the new Energy electric vehicle industry,we should also take into account the development of electric vehicle charging facilities.Therefore,the design and research of electric vehicle charging piles is very necessary.The hardware system of the electric vehicle DC charging pile is designed.The main hardware circuits include safety monitoring circuit,total voltage collecting circuit,temperature and humidity detecting circuit,voice circuit and CAN communication.The software includes a main flow chart and a temperature and humidity detection flow chart.
标签： 电动汽车
上传时间： 2022-04-03
上传用户：jason_vip1
为设计高效率、低损耗的PFC电路,本文基于UCC28019进行电路设计。以UCC28019输出的PWM波形来控制Boost升压斩波为核心电路,使电路中的电容交替地充放电、电感交替的储存和释放能量,最后实现在输入AC20V~24V电压情况下稳定输出DC38V。测试结果表明,系统实现效率为95%左右,电压调整率小于1%,电源功率因数0.99。交流输入电压为19.0-25.8 V时,输出直流电压稳定性较好,电感无明显啸叫且纹波小,具有一定的带负载能力和实用性。In order to design the PFC circuit with high efficiency and low loss,this paper designs the circuit based on UCC28019.The PWM waveform output by UCC28019 is used to control boost chopper as the core circuit,which alternately charges and discharges capacitors,stores and releases Energy by inductors,and finally achieves stable output of DC38 V under the input voltage of AC20 V~24 V.The test results show that the system achieves about 95% efficiency,the voltage adjustment rate is less than 1%,the power factor is 0.99,and the AC input voltage is 19.0-25.8 V.The output DC voltage stability is good,the inductance has no obvious whistle and the ripple is small,so it has certain load capacity and practicability.
上传时间： 2022-04-03
上传用户：
目的:自主研制一款超声手术刀电源控制系统,以减少能量的消耗,维持手术刀的正常温度。方法:对超声换能器在谐振附近的等效电路建立模型,并设计基于数字信号处理(DSP)的超声手术刀的硬件控制系统。结果:经对电源控制系统的电路和工作性能测试,生成的电流和电压的有效值等参数,能够及时调整电源的频率,并达到预期的功能指标,使超声手术刀工作在谐振状态。结论:以DSP为核心设计的超声手术刀电源控制系统,测试指标均能够达到预期的要求,能够使系统在谐振状态下工作。Objective: To independently develop a power control system of ultrasonic scalpel so as to reduce the Energy consumption and maintain the normal temperature of ultrasonic scalpel. Methods: In this paper, the model of equivalent circuit of ultrasonic transducer nearby syntony was built up, and the hardware control system of ultrasonic scalpel based on digital signal processing(DSP) was designed. Results: Through testing the circuit and work performance of power control system, the series of parameters such as effective value and so on which were produced by this system could adjust frequency of power source in time and attain anticipative functional indicator, and it took the ultrasonic scalpel to work in syntonic situation. Conclusion: The tested indicators of power control system of ultrasonic scalpel based on the kernel design of DSP can attain anticipative requirement, and can take this system to work in syntonic situation.
上传时间： 2022-04-03
上传用户：bluedrops
随着电磁阀在工业和日常应用的增多,其功耗越来越被人们所重视。通过对电磁阀驱动电路的研究,设计一套电磁阀节能驱动电路。不仅提高了电磁阀的响应时间,更重要的是降低了功耗,使电磁阀由工作在大电流状态下,变成大电流启动小电流维持的工作状态。减少了由电流过大引起的电磁阀线圈过热,增加了电磁阀的安全性。The power consumption of an electromagnetic valve is drawing increasingly more attentiori as it is widely used in industrial production and daily life. In this study, an Energy - saving driving circuit of electromagnetic valves was designed. It can make an electromagnetic valve to start with a high current while work with a low current; thereby the power consumption can be reduced. Besides, it can shorten the response time of an electromagnetic valve and improve the security of the valve.
上传时间： 2022-04-16
上传用户：
Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic Energy -- Part 4: Harness excitation methods
上传时间： 2022-04-26
上传用户：qingfengchizhu
超声波换能器作为一种实用的检测手段，能实现声波所携带的信息和电能之间转换。它的性能优良，价格低廉，操作方便，易于调试，因此在工农业生产中发挥着重要的作用。但目前换能器驱动电路的发射频率多为40 kHz，本文针对1 MHz的超声波换能器电路进行了设计，主要介绍了它的发射驱动电路和接收驱动电路的设计方案，并对它们的功能进行了详细地说明。最后搭建实验平台，并对电路的输入、输出模块进行了测试。实验结果表明，换能器电路运行良好，可以为超声波高精度测量领域的应用提供参考。As a practical means of detection, ultrasonic transducer can realize the conversion between theinformation carried by sound wave and electric Energy.It has the advantages of excellent performance,low cost, convenient operation and debugging, so plays an important role in industrial and agriculturalproduction.However, the transmitting frequency of the driving circuit for most transducer is 40 kHz.Thecircuit of 1 MHz ultrasonic transducer is designed In this paper. It mainly introduces the emissive drivingcircuit and the receiving circuit design and the detailed function of them. Finally, the experimentalplatform is built, and the circuit of input and output were tested. Experiments show that the transducer＇ s...
上传时间： 2022-04-28
上传用户：
nRF51802 Multiprotocol Bluetooth® low Energy/2.4 GHz RF System on Chip
标签： nrf51822
上传时间： 2022-05-22
上传用户：ttalli
近年来，对器件的失效分析已经成为电力电子领域中一个研究热点。本论文基于现代电力电子装置中应用最广的IGBT器件，利用静态测试仪3716，SEM（Scanning Electrom Microscope，扫描电子显微镜）、EDX（Energy Dispersive X-Ray Spectroscopy、能量色散x射线光谱仪）、FIB（Focused lon beam，聚焦高子束）切割、TEM（Thermal Emmision Microscope，高精度热成像分析仪）等多种分析手段对模块应用当中失效的1GBT芯片进行电特性分析、芯片解剖并完成失效分析，并基于相应的失效模式提出了封装改进方案。1，对于栅极失效的情况，本论文先经过电特性测试完成预分析，并利用THEMOS分析出栅极漏电流通路，找到最小点并进行失效原因分析，针对相应原因提出改进方案。2，针对开通与关断瞬态过电流失效，采用研磨、划片等手段进行芯片的解剖。并用SEM与EDX对芯片损伤程度进行评估分析，以文献为参考进行失效原因分析，利用saber仿真进行失效原因验证。3，针对通态过电流失效模式，采用解剖分析来评估损伤情况，探究失效原因，并采用电感钳位电路进行实验验证。4，针对过电压失效模式，采用芯片解剖方式来分析失效点以及失效情况，基于文献归纳并总结出传统失效原因，并通过大量实验得出基于封装的失效原因，最后采用saber仿真加以验证。
标签： igbt
上传时间： 2022-06-21
上传用户：1208020161
