虫虫首页| 资源下载| 资源专辑| 精品软件
登录| 注册

A-key

  • 安富利:基于MSP430FE427(A) 模块的电度表解决方案(英文版)

      Avnet Design Service电源实验室开发出基于MSP430FE427(A) 模块的电度表解决方案:   (1)电压 (90Vac~264Vac) 与电流 (10Arms) 测量范围宽   (2)电度表是一种测量用电量的设备   (3)LCD显示电量 (kWh)、功率 (W)、电压 (V)、电流 (A)、功率因数(PF) 与温度 (oC) 测量值   (4)264Vac/63Hz与140mW @90Vac/47Hz条件下,无负载功耗低于300mW   (5)测量精度高达2%

    标签: MSP 430 427 FE

    上传时间: 2013-10-13

    上传用户:cjf0304

  • 基于微网的光伏变流器系统设计

    光伏发电是未来新能源发电重要方向之一,而光伏变流器是光伏发电系统的核心。介绍一种基于微网理念的光伏变流器设计。以该变流器为核心的光伏发电系统可以看做一个小型的微网系统。该系统能根据外部电网情况,工作于并网模式和离网模式。介绍了该系统的各个组成部件的设计以及变流器主电路部分器件的选型。最后,由实验样机进行测试。试验结果验证了电路拓扑结构及控制方案的可行性,也说明了系统参数设计方法的正确性。 Abstract:  Solar Photovoltaic generation is an important direction of new energy power generation in the future,while photovoltaic converter is the core of photovoltaic generation system. This paper deals with a study on photovoltaic inverter based on the concept of microgrid. This paper describes a system whose core component is the photovoltaic inverter,can work on grid-connected mode or run independently according to the external situation. The paper simply describes the main components of the system. At last,the prototype was produced and tested. Test result has proved feasibility of circuit topology structure and controlling scheme and shown correctness of system parameters.Key words: PV inverter; microgrid; off-grid; storage battery

    标签: 光伏 变流器 系统设计

    上传时间: 2014-12-24

    上传用户:Shaikh

  • 小型直流电源PMC-A/PMC系列

    PMC和PMC-A系列是小型,高性能,恒定电压,恒定电流的串联调节器方式的DC电源。采用串联调节器方式的设计,可以在低噪声输出等级的情况下实现了高稳定的输出。LED数字仪表在朦胧的环境中也能清晰易读,电子开关排除了继电器的颤动,也是这一系列的特征。此外,一部分的PMC-A系列装备了各种远程控制功能,通过GPIB,可连接电源控制器。

    标签: PMC-A PMC 直流电源

    上传时间: 2013-10-23

    上传用户:GHF

  • 用MSP430实现斜率 A/D转换的温度控制系统

    用 MSP430实现斜率 A/D转换的温度控制系统

    标签: MSP 430 D转换 斜率

    上传时间: 2013-12-21

    上传用户:athjac

  • A-C8V4开发板-使用说明书

    A-C8V4开发板-使用说明指南

    标签: A-C 开发板 使用说明书

    上传时间: 2013-11-04

    上传用户:王小奇

  • key处理新思路

    key处理新思路

    标签: key 新思

    上传时间: 2013-11-22

    上传用户:yulg

  • 电子设计大赛点阵电子显示屏(A题)

    电子设计大赛点阵电子显示屏(A题)

    标签: 电子设计大赛 点阵 电子显示屏

    上传时间: 2013-10-11

    上传用户:569342831

  • 无线通信网络基本概念及设计

    This white paper raises some fundamental issues the design engineer should address before deciding upon a communication approach for a wireless network. As no universal wireless network solution exists, it should be custom tailored to suit the application demands. Defining your application communication characteristics is the key to ensure optimal communication reliability and resistance to interfering noise sources.

    标签: 无线通信网络 基本概念

    上传时间: 2013-11-23

    上传用户:zhichenglu

  • 基于AVR单片机的闭环控制系统

      针对科研实验中对拉压千斤顶加载过程控制的需要,采用ATmega128单片机控制步进电机进而实现对执行系统的电动泵站实行自动控制。对力和位移的数据采集与处理及用步进电机控制电动泵站手柄的技术细节作了重点描述。通过单片机的A/D变换器对AMP放大模块采集的电桥信号作量化处理,千斤顶的操控手柄位置依电动油泵阀门开启的方向和大小作若干定位,单片机根据力或位移传感器信号,实时控制步进电机驱动手柄旋转到相应操控位置。   Abstract:   This article describes the use of ATmega128 AVR microcontroller series of DBS electric pumping stations and QF100/200 separate twoway hydraulic jack to automate the process of manipulating the work of the technical content. Articles on force and displacement data acquisition and processing, and stepper motor control electric pump with the handle of the key technical details were described. Through the MCU’s A / D converter module is collected on the AMP amplification quantify the signal bridge, jack handle position control valve opening according to the direction of electric pumps for a number of positioning and size of the microcontroller based on force or displacement sensor signals, real-time control stepper motor drive control handle rotate to the appropriate location.  

    标签: AVR 单片机 闭环控制

    上传时间: 2014-01-16

    上传用户:hasan2015

  • 基于单片机的数字化B超键盘设计

    针对目前使用的RS232接口数字化B超键盘存在PC主机启动时不能设置BIOS,提出一种PS2键盘的设计方法。基于W78E052D单片机,采用8通道串行A/D转换器设计了8个TGC电位器信息采集电路,电位器位置信息以键盘扫描码序列形式发送,正交编码器信号通过XC9536XL转换为单片机可接收的中断信号,软件接收到中断信息后等效处理成按键。结果表明,在满足开机可设置BIOS同时,又可实现超声特有功能,不需要专门设计驱动程序,接口简单,成本低。 Abstract:  Aiming at the problem of the digital ultrasonic diagnostic imaging system keyboard with RS232 interface currently used couldn?蒺t set the BIOS when the PC boot, this paper proposed a design method of PS2 keyboards. Based on W78E052D microcontroller,designed eight TGC potentiometers information acquisition circuit with 8-channel serial A/D converter, potentiometer position information sent out with keyboard scan code sequentially.The control circuit based on XC9536 CPLD is used for converting the mechanical actions of the encoders into the signals that can be identified by the MCU, software received interrupt information and equivalently treatmented as key. The results show that the BIOS can be set to meet the boot, ultrasound specific functionality can be achieved at the same time, it does not require specially designed driver,the interface is simple and low cost.    

    标签: 单片机 B超 数字化 键盘设计

    上传时间: 2013-10-10

    上传用户:asdfasdfd