虫虫首页| 资源下载| 资源专辑| 精品软件
登录| 注册

A-Key

  • 单片机A/D和D/A应用接口技术

    18-2.  D/A转换器基本知识18-3. 光导智能小车硬件实现18-4. ADC0832基本应用方法18-5. 光导智能小车软件实现A/D转换器的主要技术指标分辨率  使输出数字量变化一个相邻数码所需输入模拟电压的变化量。常        用二进制的位数表示。        例如:12位ADC的分辨率就是12位,一个10V满刻度的12位ADC能分辨        输入电压变化最小是:                       10V×1/212=2.4mV量化误差 ADC把模拟量变为数字量,用数字量近似表示模拟量,这个过程称为量化。量化误差是ADC的有限位数对模拟量进行量化而引起的误差。A/D转换器的主要技术指标偏移误差      指输入信号为零时,输出信号不为零的值,所以有时又称为零值误差。满刻度误差 满刻度误差又称为增益误差。指满刻度输出数码所对应的实际输入电压与理想输入电压之差。线性度 线性度有时又称为非线性度,指转换器实际的转换特性与理想直线的最大偏差。A/D转换器的主要技术指标绝对精度 在一个转换器中,任何数码所对应的实际模拟量输入与理论模拟输入之差的最大值,称为绝对精度。对于ADC而言,可以在每一个阶梯的水平中点进行测量,它包括了所有的误差。转换速率 指ADC能够重复进行数据转换的速度,即每秒转换的次数。而完成一次A/D转换所需的时间(包括稳定时间),则是转换速率的倒数。

    标签: 单片机 应用接口

    上传时间: 2013-11-25

    上传用户:banlangen

  • 用单片机内置比较器设计高精度A/D变换器

    Σ-ΔA/D技术具有高分辨率、高线性度和低成本的特点。本文基于TI公司的MSP430F1121单片机,介绍了采用内置比较器和外围电路构成类似于Σ-△的高精度A/D实现方案,适合用于对温度、压力和电压等缓慢变化信号的采集应用。 在各种A/D转换器中,最常用是逐次逼近法(SAR)A/D,该类器件具有转换时间固定且快速的特点,但难以显著提高分辨率;积分型A/D 有较强的抗干扰能力,但转换时间较长;过采样Σ-ΔA/D由于其高分辨率,高线性度及低成本的特点,正得到越来越多的应用。根据这些特点,本文以TI公司的MSP430F1121单片机实现了一种类似于Σ-ΔA/D技术的高精度转换器方案。 MSP430F1121是16位RISC结构的FLASH型单片机,该芯片有14个双向I/O口并兼有中断功能,一个16位定时器兼有计数和定时功能。I/O口输出高电平时电压接近Vcc,低电平时接近Vss,因此,一个I/O口可以看作一位DAC,具有PWM功能。 该芯片具有一个内置模拟电压比较器,只须外接一只电阻和电容即可构成一个类似于Σ-Δ技术的高精度单斜率A/D。一般而言,比较器在使用过程中会受到两种因素的影响,一种是比较器输入端的偏置电压的积累;另一种是两个输入端电压接近到一程度时,输出端会产生振荡。 MSP430F1121单片机在比较器两输入端对应的单片机端口与片外输入信号的连接线路保持不变的情况下,可通过软件将比较器两输入端与对应的单片机端口的连接线路交换,并同时将比较器的输出极性变换,这样抵消了比较器的输入端累积的偏置电压。通过在内部将输出连接到低通滤波器后,即使在比较器输入端两比较电压非常接近,经过滤波后也不会出现输出端的振荡现象,从而消除了输出端震荡的问题。利用内置比较器实现高精度A/D图1是一个可直接使用的A/D转换方案,该方案是一个高精度的积分型A/D转换器。其基本原理是用单一的I/O端口,执行1位的数模转换,以比较器的输出作反馈,来维持Vout与Vin相等。图1:利用MSP430F1121实现的实用A/D转换器电路方案。

    标签: 用单片机 内置 比较器 变换器

    上传时间: 2013-11-10

    上传用户:lliuhhui

  • 基于ADSP-BF561 的数字摄像系统设计

    基于ADSP-BF561的数字摄像系统设计Design of Digital Video Camera System Based on Digital Signal ProcessorADSP-BF561(浙江大学 信息与通信工程研究所,浙江 杭州 310027) 马海杰, 刘云海摘要:介绍了基于ADI双核的数字信号处理芯片ADSP-BF561 的数字摄像系统实现方案。系统包括硬件和软件两部分,硬件主要有ADSP-BF561及其外围电路、音视频模数/数模转换、CF卡/微硬盘接口等部分。软件主要有操作系统及音视频编解码算法等部分。关键词:ADSP-BF561 ;数字摄像机;微硬盘;MPEG-4;A/D;D/A中图分类号:TN948.41文献标识码:AAbstract: An implementation of digital video camera system based on ADI dual core digital signal processor ADSP-BF561 is introduced. The system can be divided into two parts——hardware and software design. The hardware design includes ADSP-BF561 and perpheral apparatus, A/D,D/A, CF card or Microdrive and so on. The software includes operating system , audio and video coding algorithm.Key words: ADSP-BF561; digital video camera; microdrive; MPEG-4;A/D;D/A

    标签: ADSP-BF 561 数字摄像 系统设计

    上传时间: 2013-11-10

    上传用户:yl1140vista

  • 带通滤波器设计计算

    摘 要:用一种新的思路和方法,先计算低通、再计算高通滤波器的有关参数,然后组合成带通滤波器.关键词:滤波器;参数;新思路中图分类号: TN713. 5  文献识别码:B  文章编号:1008 - 1666 (1999) 04 - 0089 - 03A New Consideration of the Band Filter’s CalculationGuo Wencheng( S hao Yang B usiness and Technology school , S haoyang , Hunan ,422000 )Abstract :This essay deals with a new method of calculating the band filters - first calculatingthe relevant parameters of low - pass filters ,then calculating the ones of high - pass filters.Key words :filter ; parameters ;new considercation八十年代后,信息产业得到了迅猛发展. 带通滤波器在微波通信、广播电视和精密仪器设备中得到了广泛应用. 带通滤波器性能的优劣,对提高接收机信噪比,防止邻近信道干扰,提高设备的技术指标,有着十分重要的意义.我在长期的教学实践中,用切比雪夫型方法设计、计算出宽带滤波器集中参数元件的数据. 该滤波器可运用在检测微波频率的仪器和其他设备中. 再将其思路和计算方法介绍给大家,供参考.

    标签: 带通滤波器设计 计算

    上传时间: 2014-12-28

    上传用户:Yukiseop

  • 基于DSP的新型柴油发电机励磁控制系统研究

    在综合分析谐波励磁无刷同步发电机励磁控制系统的基础上,对其励磁控制策略进行了研究,开发了一套基于DSP( TMS320F2812) 控制的新型柴油发电机励磁控制系统,该系统采用参数自适应模糊PID 控制励磁,选用交流采样方式实时检测各信号的瞬时特性,系统仿真结果以及在1 台25 kW 工频柴油发电机上的试验结果证明了该控制器具有较好的电压调节特性,系统稳态和暂态性能完全满足发电机对励磁系统的要求。关键词:励磁调节;模糊PID 控制;数字信号处理器;交流采样 Abstract :According to the general analysis of the excitation cont rol system of the harmonious wave excitation brushless synchronous generator and it s characteristics ,a new type of diesel generator excitation cont rol system based on DSP( TMS320F2812) was designed. An adaptive fuzzy PID cont rol of excitation is used in this system. To detect the t ransient characteristics of the signals in a timely manner ,AC sampling was applied.The system simulation result s and the testing result s f rom a 25 kW diesel generator (50 Hz) can prove that the voltage regulation characteristics of the excitation cont rol system are very well ,and both the steadyOstate performance and the t ransient performance of the generator are also good.Key words :excitation cont rol ;fuzzy PID cont rol ;digital signal processor (DSP) ;AC sampling

    标签: DSP 柴油发电机 励磁控制 系统研究

    上传时间: 2013-10-29

    上传用户:fxf126@126.com

  • 基于DSP的车载雷达测速系统设计

    针对运行中火车测速运用多普勒效应采用DSP 设计雷达测速系统并阐述了其基本设计思想与工作原理给出系统硬件软件设计结构和原理图改善了原有光电测速精度提高了系统工作稳定性和可靠性经实验证明DSP 采集板工作稳定测速效果好关键词DSP; 雷达测速; 多普勒效应 On Board DSP-Based Radar Speed Measurement System TANG Wei, SUN Zhi-fang, CHEN Quan (Dept.of computer Science,Yangtze University,Jingzhou 434023,China)Abstract: This paper presents a DSP-based train speed measurement by using Doppler radar. The structure of the system is introduced.The hardware and software are also discussed.Key words: DSP; rader speed measurement; doppler principle

    标签: DSP 车载 系统设计 雷达测速

    上传时间: 2013-10-27

    上传用户:003030

  • Create a 1-Wire Master with Xilinx PicoBlaze

    Abstract: Designers who must interface 1-Wire temperature sensors with Xilinx field-programmable gate arrays(FPGAs) can use this reference design to drive a DS28EA00 1-Wire slave device. The downloadable softwarementioned in this document can also be used as a starting point to connect other 1-Wire slave devices. The systemimplements a 1-Wire master connected to a UART and outputs temperature to a PC from the DS28EA00 temperaturesensor. In addition, high/low alarm outputs are displayed from the DS28EA00 PIO pins using LEDs.

    标签: PicoBlaze Create Master Xilinx

    上传时间: 2013-11-05

    上传用户:a6697238

  • AstroII-EVB-F1K(A)-L144开发板用户指南

        AstroII-EVB-F1K(A)-L144开发板用户指南

    标签: AstroII-EVB-F 144 开发板 用户

    上传时间: 2013-11-22

    上传用户:zhichenglu

  • Employing a Single-Chip Transceiver in Femtocell Base-Station Applications

    Abstract: This application note discusses the development and deployment of 3G cellular femtocell base stations. The technicalchallenges for last-mile residential connectivity and adding system capacity in dense urban environments are discussed, with 3Gfemtocell base stations as a cost-effective solution. Maxim's 3GPP TS25.104-compliant transceiver solution is presented along withcomplete radio reference designs such as RD2550. For more information on the RD2550, see reference design 5364, "FemtocellRadio Reference Designs Using the MAX2550–MAX2553 Transceivers."

    标签: Base-Station Applications Single-Chip Transceiver

    上传时间: 2013-11-07

    上传用户:songrui

  • 基于FPGA的光纤光栅解调系统的研究

     波长信号的解调是实现光纤光栅传感网络的关键,基于现有的光纤光栅传感器解调方法,提出一种基于FPGA的双匹配光纤光栅解调方法,此系统是一种高速率、高精度、低成本的解调系统,并且通过引入双匹配光栅有效地克服了双值问题同时扩大了检测范围。分析了光纤光栅的测温原理并给出了该方案软硬件设计,综合考虑系统的解调精度和FPGA的处理速度给出了基于拉格朗日的曲线拟合算法。 Abstract:  Sensor is one of the most important application of the fiber grating. Wavelength signal demodulating is the key techniques to carry out fiber grating sensing network, based on several existing methods of fiber grating sensor demodulation inadequate, a two-match fiber grating demodulation method was presented. This system is a high-speed, high precision, low-cost demodulation system. And by introducing a two-match grating effectively overcomes the problem of double value while expands the scope of testing. This paper analyzes the principle of fiber Bragg grating temperature and gives the software and hardware design of the program. Considering the system of demodulation accuracy and processing speed of FPGA,this paper gives the curve fitting algorithm based on Lagrange.

    标签: FPGA 光纤光栅 解调系统

    上传时间: 2014-07-24

    上传用户:caiguoqing