代码搜索：sbit
找到约 10,000 项符合「sbit」的源代码
代码结果 10,000
www.eeworm.com/read/164327/10118238
c sh101.c
#include
sbit gate=P2^0; // 定义P2-0口
void main(void)
{
unsigned int i,j;
while(1)
{
for(i=1000;i>0;i--)
for(j=1000;j>0;j--); // 双重循环，延时约1秒
gate=!gate; // 对P-0口取反，控制小灯的
www.eeworm.com/read/359723/10127996
h pindef.h
#include
#define VX1828 0xDE //??????????????
#define vx1828 VX1828
#define EEPROM 0xA0
#define S3539 0x60
//***********************************************
www.eeworm.com/read/359505/10141025
c monick.c
//模拟串口LED6位显示已通过试验!
#include
#include
sbit P1_0=P1^0;
sbit P1_1=P1^1;
sbit P1_4=P1^4;
unsigned char a=0,b=0,c=0,d=0,e=0,f=0;
unsigned char x[]={0x03,0x9f,0x25,0x0d,0x99,0x49,0
www.eeworm.com/read/359474/10143884
h ds1302.h
#define uchar unsigned char
sbit DS1302_CLK = P2^4; //实时时钟时钟线引脚
sbit DS1302_IO = P2^5; //实时时钟数据线引脚
sbit DS1302_RST = P2^3; //实时时钟复位线引脚
void writ
www.eeworm.com/read/359345/10154533
c 43.c
#include //包含串行处理模块
bit showclocksign;
bit showblocksign;
bit showfensign;
uchar count;
uint second;
uchar paoplace;
uint zongfen;
uchar speed=32;
idata uint free[16];
www.eeworm.com/read/358567/10184680
c text1.c
#include
#include
#include
#include
#define uchar unsigned char
#define uint unsigned int
sbit sclk=P0^7; //要有实现滚屏的函数
sbit sdin=P0^6;
sbit dc =P0^5
www.eeworm.com/read/357840/10200486
c h15.c
#include "reg51.h"
#define ON 1
#define OFF 0
sbit SR = 0x90; // 南北红灯
sbit SY = 0x91; // 南北黄灯
sbit SG = 0x92; // 南北绿灯
sbit ER = 0x93; // 东西红灯
sbit EY = 0x94; // 东西黄灯
sbit EG = 0x
www.eeworm.com/read/357203/10213678
c 10-6.c
#include
#include
#define uchar unsigned char
#define uint unsigned int
sbit P1_0=P1^0; // 引脚连接关系
sbit P1_1=P1^1;
sbit P1_2=P1^2;
uchar readclk(uchar addr)
{
uc
www.eeworm.com/read/356673/10223061
c 59秒计数器.c
//59秒自动计数器
#include
#define uchar unsigned char
uchar j,k,i,a,A1,A2,second;
sbit dula=P2^6;
sbit wela=P2^7;
uchar code table[]={0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,
www.eeworm.com/read/356548/10224865
c 08819.c
///////////////////////////////////////////////////////////////////
//新规则交通灯设计/////////////////////////////////////////////////
//设置P3.0，P3.1，P3.2三个按键调节时间，key1（功能键）/////////////
//调节主次通道的时间,key2(减一