代码搜索：main.c
找到约 10,000 项符合「main.c」的源代码
代码结果 10,000
www.eeworm.com/read/388325/8614515
c main.c
#include"reg52.h"
#include"intrins.h"
#include"interface.h"
#include"my_type.h"
#include"function.h"
#include"global_var.h"
float ad_temp;
uchar disp[4];
uint a[8];
uint i,j,ad_zhi;
ucha
www.eeworm.com/read/388322/8614596
c main.c
#include"main.h"
#include"display.h"
uchar code Dis_Data[]={0xC0,0xF9,0xA4,0xB0,0x99,0x92,0x82,0xF8,
0x80,0x90,0x88,0x83,0xC6,0xA1,0x86,0x8E,0xff}; //数码管数字字库
//0,1,2,3,4,5,6,7,8,9,A,b,
www.eeworm.com/read/288659/8615328
c main.c
//---------------------------------------------------------------------------
// Copyright (c) 2002 Jim Brady
// Do not use commercially without author's permission
// Last revised August 2002
//
www.eeworm.com/read/432278/8615755
c main.c
/*Main.c*/
/*PWM电机控制程序,正反转,默认设置的工作频率1kHz*/
#include "global.c"
void SystemInit();
void PWM_Init() ;
void KickDog();
int numled0=200;
unsigned int t0=0;
unsigned int XPWM=0;
m
www.eeworm.com/read/432277/8615840
c main.c
/*Main.c*/
/*CAN发送与接收程序,波特率设置为125kbps,标准帧,ID=0x024*/
#include "global.c"
void SystemInit();
void Timer1Init();
void KickDog();
void Can_Init();
void Can_Send();
int numled0=200;
unsig
www.eeworm.com/read/432275/8615932
c main.c
/*Main.c*/
/*AD采样基本程序,并带有排队滤波函数
采样结果的精度与稳定性与基准源和信号源有关
请在项目开发的时候选择稳定的电压基准源*/
#include "global.c"
void SystemInit();
void Timer1Init();
void KickDog();
void SPI_Init();
void DA_OUT(un
www.eeworm.com/read/432273/8616033
c main.c
/*Main.c*/
/*SPI-TLC5620 DA转换程序*/
#include "global.c"
void SystemInit();
void Timer1Init();
void KickDog();
void SPI_Init();
void DA_OUT(unsigned CHANNEL,unsigned int RNG,unsigned int SPI
www.eeworm.com/read/432272/8616131
c main.c
/*Main.c*/
/*串口发送与中断接收程序,波特率设置为9600*/
#include "global.c"
void SystemInit();
void Timer1Init();
void KickDog();
void SCI_Init();
void SCI_Send();
int numled0=200;
unsigned int t0=0;
www.eeworm.com/read/432271/8616235
c main.c
/*Main.c*/
/*按键与走马灯程序*/
#include "global.c"
void SystemInit();
void Timer1Init();
void KickDog();
void KeyLed();
unsigned int numled0=200,numkey=0,numled=0,numled_back=200;
unsigned in
www.eeworm.com/read/432270/8616339
c main.c
/*Main.c,LED与定时器程序*/
#include "global.c"
void SystemInit();
void Timer1Init();
void KickDog();
int numled=200;
main()
{
SystemInit(); /*系统初始化*/
MCRA=MCRA & 0xC0FF;