代码搜索：Write_DS
找到约 125 项符合「Write_DS」的源代码
代码结果 125
www.eeworm.com/read/425660/10340067
c ds1820.c
#BYTE TRISA=0x85
#BYTE PORTA=0x5
#BYTE STATUS=0x3
#define RP0 5
#define C 0
// The following are standard 1-Wire routines.
void make_ds1820_high_pin(int sensor)
{
TRISA = 0xff;
}
v
www.eeworm.com/read/272350/10961636
h ds1307.h
#include "at8xc51snd1.h"
#include "system.h"
uchar Read_DS1307(uchar addr);
void Write_DS1307_Byte(uchar byte);
void Write_DS1307(uchar addr,uchar dat);
void rtc_get(void);
void rtc_set(void
www.eeworm.com/read/272350/10961638
c ds1307.c
#include "at8xc51snd1.h"
#include "system.h"
#include "twi.h"
#include "ds1307.h"
#include "lcd.h"
// ************************************************************ //
// *** This routine will
www.eeworm.com/read/417359/10992995
lss main.lss
main.elf: file format elf32-avr
Sections:
Idx Name Size VMA LMA File off Algn
0 .text 0000063c 00000000 00000000 00000094 2**1
CO
www.eeworm.com/read/452929/7429174
c ds1820.c
#include
#include
#include
#include
#include
#include "MyDef.h"
#include "ds1820.h"
const uchar CRC_Code[256]={ //DS1820 CRC校
www.eeworm.com/read/327733/13065096
txt 用at89c51与ds1302做的万年历c语言编程.txt
#include
#include
#define uchar unsigned char
#define uint unsigned int
sbit rs=P2^0;
sbit rw=P2^1;
sbit en=P2^2;
sbit reset=P1^5;
sbit sclk=P1^6;
sbit io=P1^7;
uchar s
www.eeworm.com/read/483521/6598427
txt 万年历程序.txt
用AT89C51与DS1302做的万年历c语言编程2007年05月08日 星期二 14:57郑重声明 ：此程序非本人所编，现在只是传上来给大家看看参考，勿作其他用途 ！！
-------------*/
//写的时候，是低电平改变数据，上升沿送入数据
//读的时候，是低电平读入数据，下降沿使得从设备把数据放到总线上
//读的时候，是低电平读，但没有读出，提供下降沿使得从设备把数据放到 ...
www.eeworm.com/read/413220/11162191
h ds1302.h
//////////////////////////////////////////////////////////////////////////
//// DS1302.h ////
//// Driver for Real Time Clock
www.eeworm.com/read/280214/10346361
c ds18b20.c
#define ds18b20_c
#include "main.h"
void reset_ds18b20(void)
{
//set_ds18b20_dq_ddr();
clr_ds18b20_dq();
_delay_us(198);//100us
_delay_us(198);//100us
_delay_us(198);//100us
_delay_us(1
www.eeworm.com/read/236536/14012320
txt code.txt
ds18b20 gcc下 源程序
sume 发表于 2006-9-18 11:09:00
http://www.daxia.com/list_1734.shtml
//mega8 7.3728MHz gcc编译通过，_delay_us(us) _delay_ms(ms)调用库函数
//初始化把dq设置为输出
#define ds18b20_dq PC5
#define set_