代码搜索：Write

找到约 10,000 项符合「Write」的源代码

代码结果 10,000
热门代码： main.c GPIO I2C SPI UART timer interrupt ADC PWM LED
www.eeworm.com/read/443081/7638319

h 1602lcd.h

/*--------------------------------------------------------------- 下面是AVR与LCD连接信息 PA2 ->RS PA3 ->EN 地 ->RW PA4 ->D4 PA5 ->D5 PA6 ->D6 PA7 ->D7 要使用本驱动，改变下面配置信息即可 -------------------
·
www.eeworm.com/read/443081/7638347

h~ 1602lcd.h~

/*--------------------------------------------------------------- 下面是AVR与LCD连接信息 PA2 ->RS PA3 ->EN 地 ->RW PA4 ->D4 PA5 ->D5 PA6 ->D6 PA7 ->D7 要使用本驱动，改变下面配置信息即可 -------------------
·
www.eeworm.com/read/441382/7671202

lst lcd.lst

C51 COMPILER V7.06 LCD 12/23/2008 15:18:26 PAGE 1 C51 COMPILER V7.06, COMPILATION OF MODULE LCD OBJECT MODULE PLACED IN lcd
·
www.eeworm.com/read/441382/7671224

c lcd.c

#include #define uint unsigned int #define uchar unsigned char #define line1 128 #define line2 192 uchar code num[]="0123456789"; sbit en=P3^3; sbit rw=P3^4; sbit rs=P3^5; void del
·
www.eeworm.com/read/441262/7672229

c 111.c

/*********************程序功能*********************/ /******************第一行显示键码******************/ /****************第二行显示总按键数****************/ /*******当按键超过1.5秒时总数加一并提示警告********/ #include #
·
www.eeworm.com/read/440539/7688175

c 18b20.c

#include #include #define unchar unsigned char #define unint unsigned int; unchar code table[]={0xb0,0xb1,0xb2,0xb3,0xb4,0xb5,0xb6,0xb7,0xb8,0xb9,0xa3}; unchar buf[]={0,0,10,0
·
www.eeworm.com/read/440344/7690337

c lcd.c

#include #include #define LCD_STROBE ((LCD_EN = 1),(LCD_EN=0)) void DelayUs(unsigned char cnt) reentrant { while(cnt!=0) {cnt--;} } void DelayMs(unsigned char cnt) reen
·
www.eeworm.com/read/440341/7690432

h lcd.h

#define SET_SCK PORTC|=0x08;//串行时钟线 #define CLR_SCK PORTC&=0xf7; #define SET_SID PORTC|=0x10;//串行数据线 #define CLR_SID PORTC&=0Xef; #define SET_CS PORTC|=0x20; //片选 #define CLR_CS PORTC&=0xdf; /
·
www.eeworm.com/read/440296/7690837

c 1602.c

#include "..\inc\1602.h" #include "..\inc\uTypes.h" #include "..\inc\sysUtils.h" #define LCD1602_WR_H() rPDATC|=0x01; #define LCD1602_WR_L() rPDATC&=~0x01; //总线地址声明 volatile U8 * LCD1602_M
·
www.eeworm.com/read/439267/7713775

c main.c

#include #define uchar unsigned char #define uint unsigned int #define spi_cs BIT1 #define da_cs BIT6 #define Enable P2OUT&=~spi_cs; #define Disable P2OUT|=spi_cs; uchar str[2
·