代码搜索：Voltage Regulation

找到约 5,122 项符合「Voltage Regulation」的源代码

代码结果 5,122
热门代码： main.c GPIO I2C SPI UART timer interrupt ADC PWM LED
www.eeworm.com/read/334821/12571768

c 3310.c

/*;接脚资料： ;Pin Signal Description Port ;1:VDD ;Power Input. Logic supply voltage range VDD to GND : 2.7 to 3.3 V 2:SCLK ;Serial clock. Input for the clock signal: 0.0 to 4.0 Mbits/s. 3:SDIN Se
·
www.eeworm.com/read/277393/10642345

c ad7705.c

#include #include #include #include #include #define uchar unsigned char #define uint unsigned int unsigned int voltage; unsigned int ad7705ti
·
www.eeworm.com/read/421141/10753591

h stc12cx052.h

/*-------------------------------------------------------------------------- STC12CX052.H Header file for the low voltage Flash Atmel STC12C1052 and STC12C2052 STC12C4052 STC12C5052 STC12C1052AD
·
www.eeworm.com/read/418304/10955486

m fm_pmu.m

function fm_pmu(flag) %FM_PMU defines Phasor measurement unit % %Data Format Pmu.con: % col #1: Bus 1 number % col #2: Bus 1 Voltage Rate [kV] % col #3: Frequency rate [Hz] % col #4: Time consta
·
www.eeworm.com/read/404030/11492374

c lcd_backup.c

#include //Vo pin---Voltage about 0.6V is engough!!! __CONFIG(0X3FF9); void Delay1ms(); void DelayNms(unsigned int); void Toggle(); unsigned char ReadBF(); void WRCommand(unsigned char
·
www.eeworm.com/read/404030/11492378

c lcd_backup_new.c

#include //Vo pin---Voltage about 0.6V is engough!!! #include #define LEFT 0 #define RIGHT 1 #define ENB RD7 #define RW RD6 #define RESET RD5
·
www.eeworm.com/read/149508/12370180

pri w_1_prj.pri

[Project.ID] Ver=200 Target=IDK432A [Configuration] Chip=uPD784218 Internal Rom=256KB Internal Ram=12800B Clock=Internal Fixed Voltage=Internal NMI=OFF RESET=OFF HLDRQ=OFF HWSTOP=OFF Loca
·
www.eeworm.com/read/290244/8493368

c 温度ltc1392 with pic16c84.c

Use of an LTC1392 10-bit Temperature, Vcc and Differential Voltage Monitor - Basic Stamp 2 and PIC16C84 歌林电子制作实验室www.nbglin.com Introduction. The Linear Technology LTC1392 is an inexpensive
·
www.eeworm.com/read/388636/8590175

c ct.c

#include "MATH.H" #include "STC12.H" #include "pin.h" #include "function.h" #include "evariable.h" //cwf2:temperature sensor character -- //Dv=10/(10+R)*1024 //output voltage 2.8532v~0.8807
·
www.eeworm.com/read/179131/9370128

pri inprogsum.pri

[Project.ID] Ver=200 Target=IDK0S32A [Configuration] Chip=uPD78F9418 Internal Rom=32KB Internal Ram=512B Clock=Internal Fixed Voltage=Internal Peripheral Break=OFF RESET=ON [Mapping] Count
·