代码搜索：U-Boot

找到约 7,017 项符合「U-Boot」的源代码

代码结果 7,017
热门代码： main.c GPIO I2C SPI UART timer interrupt ADC PWM LED
www.eeworm.com/read/414420/2146253

c natsemi.c

/* natsemi.c: A U-Boot driver for the NatSemi DP8381x series. Author: Mark A. Rakes (mark_rakes@vivato.net) Adapted from an Etherboot driver written by: Copyright (C) 2001 Entity Cyber,
·
www.eeworm.com/read/414420/2146261

c rtl8139.c

/* * rtl8139.c : U-Boot driver for the RealTek RTL8139 * * Masami Komiya (mkomiya@sonare.it) * * Most part is taken from rtl8139.c of etherboot * */ /* rtl8139.c - etherboot driver for the Rea
·
www.eeworm.com/read/414420/2146453

sandpoint8240 readme.sandpoint8240

The port was tested on a Sandpoint 8240 X3 board, with U-Boot installed in the flash memory of the CPU card. Please use the following DIP switch settings: Motherboard: SW1.1: on SW1.2: on SW1.3: on
·
www.eeworm.com/read/414420/2146469

atum8548 readme.atum8548

Building U-Boot --------------- The ATUM8548 code is known to build using ELDK 4.1. $ make ATUM8548_config Configuring for ATUM8548 board... $ make Using Flash ----------- The ATUM8548 board has
·
www.eeworm.com/read/414420/2146821

h iphase4539.h

/* * (C) Copyright 2002 Wolfgang Grandegger * * This file is based on similar values for other boards found in * other U-Boot config files, mainly tqm8260.h and mpc8260ads.h. * * Se
·
www.eeworm.com/read/414420/2147487

h byteorder.h

/* * U-boot - byteorder.h * * Copyright (c) 2005-2007 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of
·
www.eeworm.com/read/408818/2242348

c natsemi.c

/* natsemi.c: A U-Boot driver for the NatSemi DP8381x series. Author: Mark A. Rakes (mark_rakes@vivato.net) Adapted from an Etherboot driver written by: Copyright (C) 2001 Entity Cyber,
·
www.eeworm.com/read/408818/2242366

c rtl8139.c

/* * rtl8139.c : U-Boot driver for the RealTek RTL8139 * * Masami Komiya (mkomiya@sonare.it) * * Most part is taken from rtl8139.c of etherboot * */ /* rtl8139.c - etherboot driver for the Rea
·
www.eeworm.com/read/408818/2242498

sandpoint8240 readme.sandpoint8240

The port was tested on a Sandpoint 8240 X3 board, with U-Boot installed in the flash memory of the CPU card. Please use the following DIP switch settings: Motherboard: SW1.1: on SW1.2: on SW1.3: on
·
www.eeworm.com/read/408818/2242763

h iphase4539.h

/* * (C) Copyright 2002 Wolfgang Grandegger * * This file is based on similar values for other boards found in * other U-Boot config files, mainly tqm8260.h and mpc8260ads.h. * * Se
·