代码搜索：Timer0

找到约 1,870 项符合「Timer0」的源代码

代码结果 1,870
热门代码： main.c GPIO I2C SPI UART timer interrupt ADC PWM LED
www.eeworm.com/read/241033/13178339

c int_osc_measure1.c

//----------------------------------------------------------------------------- // INT_OSC_Measure1.c //----------------------------------------------------------------------------- // Copyright 20
·
www.eeworm.com/read/151225/5685231

c int2s.c

/*fosc=12MHz,要求P1.0输出T=200ms的方波,P1.7输出T=2s的方波.*/ /*使用两个定时中断*/ #include sbit p1_0=P1^0; sbit p1_7=P1^7; unsigned char i=0; timer0()interrupt 1 using 1 {p1_0=!p1_0; TH0=-50000/256; TL0
·
www.eeworm.com/read/142200/5765834

c int2s.c

/*fosc=12MHz,要求P1.0输出T=200ms的方波,P1.7输出T=2s的方波.*/ /*使用两个定时中断*/ #include sbit p1_0=P1^0; sbit p1_7=P1^7; unsigned char i=0; timer0()interrupt 1 using 1 {p1_0=!p1_0; TH0=-50000/256; TL0
·
www.eeworm.com/read/134909/5891472

c timer0.c

/*A sample project file to be used with HI-TIDE, to demonstrate the functionality of the microcontroller's TIMER0.*/ /*Refer to timer0.txt for additional information*/ #include #inclu
·
www.eeworm.com/read/403374/11518446

c int2s.c

/*fosc=12MHz,要求P1.0输出T=200ms的方波,P1.7输出T=2s的方波.*/ /*使用两个定时中断*/ #include sbit p1_0=P1^0; sbit p1_7=P1^7; unsigned char i=0; timer0()interrupt 1 using 1 {p1_0=!p1_0; TH0=-50000/256; TL0
·
www.eeworm.com/read/260677/11708984

asm lvdaoqu.asm

ORG 00H ;主程序起始地址 JMP START ;跳至主程序 ORG 0BH ;TIMER0中断起始地址 JMP TIM0 ;跳至TIMER0中断子程序 START: MOV TMOD,#00000001B ;设TIMER0在MODEL MOV IE,#10000010B ;中断使能 START0: MOV 30H,#00 ;取简谱码谱指针 NEXT: M
·
www.eeworm.com/read/342823/11997946

m51 timer0.m51

BL51 BANKED LINKER/LOCATER V5.12 02/14/2008 12:39:12 PAGE 1 BL51 BANKED LINKER/LOCATER V5.12, INVOKED BY: C:\KEIL\C51\BIN\BL51.EXE DLED.o
·
www.eeworm.com/read/148965/12411397

c int_osc_measure1.c

//----------------------------------------------------------------------------- // INT_OSC_Measure1.c //----------------------------------------------------------------------------- // Copyright 20
·
www.eeworm.com/read/127933/14328079

c time31.c

#include sbit P1_0=P1^0; void timer0(void) interrupt 1 using 1{ P1_0=!P1_0; TH0=(65536-1000)/256; TL0=(65536-1000)%256; } void main(void) { TMOD=0x01; P1_0=0; TH0=(65
·
www.eeworm.com/read/127933/14328088

c time33.c

#include sbit P1_0=P1^0; sbit P1_7=P1^7; timer0() interrupt 1 using 1 { P1_0=!P1_0; TH0=(65536-50000)/256; TL0=(65536-50000)%256; } timer1() interrupt 3 using 2 { P1_7=!P1_7
·