代码搜索：SPCE

找到约 5,520 项符合「SPCE」的源代码

代码结果 5,520
热门代码： main.c GPIO I2C SPI UART timer interrupt ADC PWM LED
www.eeworm.com/read/295428/8165197

c main.c

//智能轮椅电机模拟信号输入程序，TLV5618AI驱动 //参考电压Vref=2.5V由MC1403PI提供 //输出模拟电压=2*Vref*(DigitalNum/0x1000) #include "SPCE061A.h" #include "IObit.h" #define uint unsigned int #define uchar unsigned char #d
·
www.eeworm.com/read/294359/8234443

c isr.c

#include #define startA 0x0031//4096&1 #define stopA 0x0036//0&0停止计数 unsigned int flag=0;//中断计数器 unsigned int num[34]={0}; void IRQ3(void)__attribute__((ISR)); void IRQ3(void) {
·
www.eeworm.com/read/294359/8234577

c isr.c

#include #include"jiema_user.h" int flag=0;//中断计数器 extern num[34]; void IRQ3(void)__attribute__((ISR)); void IRQ3(void) { if(*P_INT_Ctrl&0x0100)//是EXIT1中断 { *P_TimerA_Ctr
·
www.eeworm.com/read/294359/8235249

c isr~6.c

#include unsigned int count=0;//会不会每次进入中断程序都初始化为0？？？？？？？？？ extern temp; extern time; extern key_scan(); unsigned int showval[4]={1,2,1,0};//要显示的值 unsigned int a[16]={0x0011,0x00d
·
www.eeworm.com/read/294359/8235274

c mada.c

#include unsigned int i=0; void main() { Set_IOB_Dir(0x000f); Set_IOB_Attrib(0x000f); Set_IOB_Data(0x000f); asm("int off"); Set_TimeBase(0x0003); Set_INT_Ctrl(
·
www.eeworm.com/read/294359/8235373

c isr~5.c

#include unsigned int count=0;//会不会每次进入中断程序都初始化为0？？？？？？？？？ extern temp; extern time; extern key_scan(); unsigned int showval[4]={1,2,1,0};//要显示的值 unsigned int a[16]={0x0011,0x00d
·
www.eeworm.com/read/294359/8235382

c isr~7.c

#include unsigned int count=0;//会不会每次进入中断程序都初始化为0？？？？？？？？？ extern temp; extern time; extern key_scan(); unsigned int showval[4]={1,2,1,0};//要显示的值 unsigned int a[16]={0x0011,0x00d
·
www.eeworm.com/read/294359/8235854

c isr.c

#include #define startA 0x0031//4096&1 #define stopA 0x0036//0&0停止计数 unsigned int flag=0;//中断计数器 unsigned int num[34]={0}; extern flag1; void IRQ3(void)__attribute__((ISR)); voi
·
www.eeworm.com/read/294359/8236159

c isr2.c

#include #include"jiema2_user.h" int flag=0;//中断计数器 extern temp; void IRQ3(void)__attribute__((ISR)); void IRQ3(void) { if(*P_INT_Ctrl&0x0100)//是EXIT1中断 { *P_TimerA_Ctrl=
·
www.eeworm.com/read/294359/8236247

c hongwai.c

#include void right(); void left();//左转和右转函数 void up(); void down();//前进和后退函数 void stop();//停车函数 void initnal();//初始化函数 void khz_38();//产生方波的函数 void delay100();//各个过程之间的时间间隔 v
·