代码搜索：SPCE
找到约 5,520 项符合「SPCE」的源代码
代码结果 5,520
www.eeworm.com/read/254590/12128735
c main.c
#include "SPCE061A.h"
#include "dac5618.h"
#define TIMER_DATA_FOR_1HZ (0x82ff)
unsigned int data_val; //5618的控制字
int main()
{
Init_AGC_IO_Port();
data_val = 0x0aaa;
www.eeworm.com/read/234433/14112806
c bianjiema.c
#define C_SIOCLOCK 0x0010; // CPUCLOCK/8
#include "SPCE061V004.H"
#define p (unsigned int*)0x0050
#define q (unsigned int*)0x0060
#define s (unsigned int *)0x0062
#include "head.h"
www.eeworm.com/read/233194/14164493
c sc7461_0831.c
#include "SPCE061V004.h"
#include "unSPMACRO.h"
#define ClearWatchDog() *P_Watchdog_Clear=0x0001
unsigned int ui_KeyCnt=0;//周期记数，计算周期
unsigned int ui_KetCntTemp=0;
unsigned int ui_KeyCode=0xff
www.eeworm.com/read/231056/14258013
c main.c
#include "SPCE061A.h"
#include "7289.h"
unsigned int tb_count,time_10ms=1;
unsigned int flag=0,old_flag=0;
unsigned int new_flag=0;
void main(void)
{
unsigned int signal=0,count;
P_IOA_Ini
www.eeworm.com/read/230442/14288966
c 25431.c
#include "SPCE061A.h"
#include "lcd.h"
#include "IO_SET.H"
#define uchar unsigned char
#define uint unsigned int
//IOB12 : clk 38pin
//IOB13 : dat_in read 37pin
//IOB14 : dat_out write
www.eeworm.com/read/230434/14289375
c lcd1.c
#include
#define x 0x80
#define y 0x80
#define comm 0
#define dat 1
//#define cs IOB0
//#define data IOB1
//#define clk IOB2
volatile unsigned int *P_WatchDog_Cle
www.eeworm.com/read/127548/14350285
c tg026_chapter5_timebase_main.c
#include "SPCE061.H"
main()
{
asm("INT OFF");
//output
*P_IOB_Dir=0xFFFF;
*P_IOB_Attrib=0xFFFF;
*P_IOB_Data=0xFFFF;
*P_TimeBase_Setup=0; //timebase=8Hz
*P_INT_C
www.eeworm.com/read/228609/14376251
c main.c
//======================================================================
// 工程名称： DVR1600_Advanced.spj
// 功能描述： DVR1600语音录放范例--高级应用
// 该例子程序利用SPCE061A内部Flash录制语音(可录制三段，每段最长约10秒)并播放
// 使用到了DV
www.eeworm.com/read/226194/14490415
c main.c
#include "SPCE061V004.H"
main()
{
unsigned int uiData,i;
__asm("int off");
*P_DAC_Ctrl=C_DA1_Direct;
uiData=0x0;
while(1)
{
*P_Watchdog_Clear=C_WDTCLR;
*P_DAC1=uiData;
i
www.eeworm.com/read/220489/14798617
c irq.c
#include "spce061v004.h"
void open_int5()
{ *P_INT_Ctrl|=C_IRQ5_2Hz;
__asm("int irq ");
}
void IRQ5(void) __attribute__ ((ISR)); // 红外解码外中断EXT1
void IRQ5(void)
{