代码搜索：ReadComm

找到约 43 项符合「ReadComm」的源代码

代码结果 43
热门代码： main.c GPIO I2C SPI UART timer interrupt ADC PWM LED
www.eeworm.com/read/383343/8953976

h samfkq_b.h

#define MIS_OK 0 #define MIS_OVERFLOW 199 #define MIS_VALSTRUCT 200 #define MIS_TIMEOUT 201 #define MIS_WRITECOMM 202 #define MIS_READCOMM 203 #define MIS_SERERR
·
www.eeworm.com/read/372965/9484532

h samfkq_b.h

#define MIS_OK 0 #define MIS_OVERFLOW 199 #define MIS_VALSTRUCT 200 #define MIS_TIMEOUT 201 #define MIS_WRITECOMM 202 #define MIS_READCOMM 203 #define MIS_SERERR
·
www.eeworm.com/read/365467/9862760

h samfkq_b.h

#define MIS_OK 0 #define MIS_OVERFLOW 199 #define MIS_VALSTRUCT 200 #define MIS_TIMEOUT 201 #define MIS_WRITECOMM 202 #define MIS_READCOMM 203 #define MIS_SERERR
·
www.eeworm.com/read/297273/8033602

c com.c

//com.c #include "public.h" #include "com.h" #include "sst89cxx.h" void InitComm(unsigned char Crystal); unsigned char ReadComm(unsigned char *ch); unsigned char WriteComm(unsigned char ch);
·
www.eeworm.com/read/347752/11638582

h samfkq_b.h

#define MIS_OK 0 #define MIS_OVERFLOW 199 #define MIS_VALSTRUCT 200 #define MIS_TIMEOUT 201 #define MIS_WRITECOMM 202 #define MIS_READCOMM 203 #define MIS_SERERR
·
www.eeworm.com/read/222227/14700332

h samfkq_b.h

#define MIS_OK 0 #define MIS_OVERFLOW 199 #define MIS_VALSTRUCT 200 #define MIS_TIMEOUT 201 #define MIS_WRITECOMM 202 #define MIS_READCOMM 203 #define MIS_SERERR
·
www.eeworm.com/read/193559/8217928

h samfkq_b.h

#define MIS_OK 0 #define MIS_OVERFLOW 199 #define MIS_VALSTRUCT 200 #define MIS_TIMEOUT 201 #define MIS_WRITECOMM 202 #define MIS_READCOMM 203 #define MIS_SERERR
·
www.eeworm.com/read/339968/12190627

h sci.h

#ifndef __SCISPI_H #define __SCISPI_H 1 #include "common.h" void OpenComm0 (void); void WriteComm0 (BYTE c); void WriteCommStr0 (char *); BYTE ReadComm0 (void); BYTE ReadCommT0 (BYTE);
·
www.eeworm.com/read/392356/8348895

c lcd12864.c

#include #include #define SENDCOMM 0XF8 //0XF1000 #define READCOMM 0XFC //0XF1100 #define SENDDATA 0XFA //0XF1010 #define READDATA 0X
·
www.eeworm.com/read/130305/14198445

txt 串口.txt

① OpenComm() 打开串口资源，并指定输入、输出缓冲区的大小 ② BuildCommDCB() 、setCommState()填写设备控制块DCB，然后对已打开的串口进行参数配置; ③ ReadComm 、WriteComm()对串口进行读写操作，即数据的接收和发送. ⑶.初始化串口 m_ComPort.SetCommPort(1);　　//选择COM?
·