代码搜索结果
找到约 7,992 项符合
Motor 的代码
用pic12c508509 控制一个步进电机源程序.txt
用PIC12C508509 控制一个步进电机源程序
; STEP_3.ASM (12C508 / 12C509)
;
; Controls a stepping motor driver on GPIO bits 4, 2, 1 and 0.
;
; The direction is controlled by a switch on GPIO bit 3. Bit 5 is n
pic12c508509.asm
用PIC12C508509 控制一个步进电机源程序
; STEP_3.ASM (12C508 / 12C509)
;
; Controls a stepping motor driver on GPIO bits 4, 2, 1 and 0.
;
; The direction is controlled by a switch on GPIO bit 3. Bit 5 is not
用pic12c508509 控制一个步进电机源程序.txt
用PIC12C508509 控制一个步进电机源程序
; STEP_3.ASM (12C508 / 12C509)
;
; Controls a stepping motor driver on GPIO bits 4, 2, 1 and 0.
;
; The direction is controlled by a switch on GPIO bit 3. Bit 5 is n
用pic12c508509 控制一个步进电机源程序.txt
用PIC12C508509 控制一个步进电机源程序
; STEP_3.ASM (12C508 / 12C509)
;
; Controls a stepping motor driver on GPIO bits 4, 2, 1 and 0.
;
; The direction is controlled by a switch on GPIO bit 3. Bit 5 is n
all_text.c
#include "p89v51rx2.h"
#include "constant_type.h"
#include "global.h"
#include "lcd.h"
#include "delay.h"
#include "ir_sensor.h"
#include "motor.h"
void main()
{
u08 x=0,y=0;
LCD_Init(
用pic12c508509 控制一个步进电机源程序.txt
用PIC12C508509 控制一个步进电机源程序
; STEP_3.ASM (12C508 / 12C509)
;
; Controls a stepping motor driver on GPIO bits 4, 2, 1 and 0.
;
; The direction is controlled by a switch on GPIO bit 3. Bit 5 is n
用pic12c508509 控制一个步进电机源程序.txt
用PIC12C508509 控制一个步进电机源程序
; STEP_3.ASM (12C508 / 12C509)
;
; Controls a stepping motor driver on GPIO bits 4, 2, 1 and 0.
;
; The direction is controlled by a switch on GPIO bit 3. Bit 5 is n
用pic12c508509 控制一个步进电机源程序.txt
用PIC12C508509 控制一个步进电机源程序
; STEP_3.ASM (12C508 / 12C509)
;
; Controls a stepping motor driver on GPIO bits 4, 2, 1 and 0.
;
; The direction is controlled by a switch on GPIO bit 3. Bit 5 is n
用pic12c508509 控制一个步进电机源程序.txt
用PIC12C508509 控制一个步进电机源程序
; STEP_3.ASM (12C508 / 12C509)
;
; Controls a stepping motor driver on GPIO bits 4, 2, 1 and 0.
;
; The direction is controlled by a switch on GPIO bit 3. Bit 5 is n
init_mcu.asm
;************Setting config register and I/O port, interruptions*******
;PTB0,1,2,3,4 AS DOT0,1,2,3,4 PTB5 TO CONTROL DC-DC CONVERTER
;PTD0,1,3 AS DOT5,6&MOTOR DRIVER SIGNAL PTD4 AS INPUT CAPTURE