代码搜索：Loop
找到约 10,000 项符合「Loop」的源代码
代码结果 10,000
www.eeworm.com/read/155865/11842109
txt 12.1.3并行io口编程.txt
START:
ORG 0100H
MAIN:
MOV R0,#00H
MOV DPTR,#TABLE
DISP:
MOV A,R0
MOVC A,@A+ADPTR
MOV P1,A
ACALL DELAY
INC R0
CJNE R0,#0AH,DISP
AJMP M
www.eeworm.com/read/155865/11842308
txt 1.1.1 双字节无符号数加法.txt
DADD:
MOV R4,#00H
MOV R5,#40H
MOV R6,#60H
MOV R7,#01H
MOV 20H,R4
MOV 21H,R5
CLR C
MOV A,R4
ADD A,20H
MOV 20H,A
MOV A,R5
ADDC A,21H
JB D2,LOOP
MOV R4,20H
www.eeworm.com/read/155809/11845461
m chap9_5i.m
%Three Loop of Flight Simulator Servo System with Direct Current Motor
clear all;
close all;
%(1)Current loop
L=0.001; %L
www.eeworm.com/read/258606/11850762
m chap9_5i.m
%Three Loop of Flight Simulator Servo System with Direct Current Motor
clear all;
close all;
%(1)Current loop
L=0.001; %L
www.eeworm.com/read/344933/11851505
m51 shiyan.m51
BL51 BANKED LINKER/LOCATER V5.00 08/03/2008 18:11:50 PAGE 1
BL51 BANKED LINKER/LOCATER V5.00, INVOKED BY:
C:\KEIL\C51\BIN\BL51.EXE .\shiy
www.eeworm.com/read/155727/11851845
asm ram_fill.asm
;-----------------------------------------------------------------------------
; Copyright (C) 2004 Silicon Laboratories, Inc.
;
;
; FILE NAME : RAM_FILL.ASM
; TARGET MCU : C8051F2xx
; DES
www.eeworm.com/read/155726/11851888
asm ram_fill.asm
;-----------------------------------------------------------------------------
; Copyright (C) 2004 Silicon Laboratories, Inc.
;
;
; FILE NAME : RAM_FILL.ASM
; TARGET MCU : C8051F020
; DES
www.eeworm.com/read/155725/11851939
asm ram_fill.asm
;-----------------------------------------------------------------------------
; Copyright (C) 2004 Silicon Laboratories, Inc.
;
;
; FILE NAME : RAM_FILL.ASM
; TARGET MCU : C8051F000
; DES
www.eeworm.com/read/344919/11852609
asm 利用定时器演奏音乐.asm
ORG 001BH ;定时器T1的中断入口
MOV TH1,R1 ;重装定时初值
MOV TL1,R0 ;
CPL P2.4 ;P2.4输出方波
RETI ;中断返回
ORG 100H ;主程序
START:MOV TMOD,#01H ;定时器T1工作方式1
MOV IE,#88H ;允许T
www.eeworm.com/read/344792/11860092
v clock.v
module clock(clk,clk_1k,mode,change,turn,alert,hour,min,sec,
LD_alert,LD_hour,LD_min);
input clk,clk_1k,mode,change,turn;
output alert,LD_alert,LD_hour,LD_min;
output[7:0] hour,min,sec;
reg[7:0]