代码搜索：LEDS

找到约 3,223 项符合「LEDS」的源代码

代码结果 3,223
热门代码： main.c GPIO I2C SPI UART timer interrupt ADC PWM LED
www.eeworm.com/read/405389/11463873

txt abstract.txt

The Blinky project is a simple program for the LPC2138 using Keil MCB2130 Microcontroller Board. It blinks the LEDs at speed according to the Potentiometer setting and prints the current seting
·
www.eeworm.com/read/405388/11463946

txt abstract.txt

The Blinky project is a simple program for the LPC2138 using Keil MCB2130 Microcontroller Board. It blinks the LEDs at speed according to the Potentiometer setting and prints the current seting
·
www.eeworm.com/read/339934/12194314

c led.c

/************************************* NAME:sky2440_leds.c COPYRIGHT:www.embedsky.net *************************************/ #include #include "def.h" #include "option.h" #includ
·
www.eeworm.com/read/151395/12216276

readme

sled -- serial line LED This software reads the state of a push button to and controls 2 LEDs connected the serial line. It can be used the shutdown your server when there is no keyboard connected a
·
www.eeworm.com/read/124583/14558097

c main.c

/* ** Copyright (C) ARM Limited, 2000. All rights reserved. */ /* ** This application flashes the LEDs on the ARM Integrator board. ** It reads the board's switches to determine the flash speed
·
www.eeworm.com/read/12865/249887

c main.c

/* ** Copyright (C) ARM Limited, 2000. All rights reserved. */ /* ** This application flashes the LEDs on the ARM Integrator board. ** It reads the board's switches to determine the flash speed
·
www.eeworm.com/read/30746/1017992

txt abstract.txt

The Blinky project is a simple program for the LPC2138 using Keil MCB2130 Microcontroller Board. It blinks the LEDs at speed according to the Potentiometer setting and prints the current seting
·
www.eeworm.com/read/167890/5451904

readme

UARTS README uartsender -will send single bytes over the serial line (using the uart). It repeatedly counts from 0 to 7 outputting the value both on the LEDS and on the uart. uartsender -will receiv
·
www.eeworm.com/read/340665/3268689

c op50nled.c

/* op50nled.c -- fucntions that manipulate the LEDs. * * Copyright (c) 1995 Cygnus Support * * The authors hereby grant permission to use, copy, modify, distribute, * and license this software a
·
www.eeworm.com/read/383940/2609353

readme

This program erases volume, then randomly write (then verified by read). Led0 is ON during the test, and Led1 is ON if all tests pass. If there is a problem, all three LEDs will be ON.
·