代码搜索：LEDS

找到约 3,223 项符合「LEDS」的源代码

代码结果 3,223
热门代码： main.c GPIO I2C SPI UART timer interrupt ADC PWM LED
www.eeworm.com/read/167507/5459669

ucf system.ucf

############################################################################ ## This system.ucf file is generated by Base System Builder based on the ## settings in the selected Xilinx Board Definit
·
www.eeworm.com/read/155551/5621043

ucf system.ucf

############################################################################ ## This system.ucf file is generated by Base System Builder based on the ## settings in the selected Xilinx Board Definit
·
www.eeworm.com/read/154801/5634581

ucf system.ucf

############################################################################ ## This system.ucf file is generated by Base System Builder based on the ## settings in the selected Xilinx Board Definit
·
www.eeworm.com/read/101167/15842855

c bits_1.c

// BITS_1.C // // Illustrates the use of bit fields. // // Configuration - LEDS (8) on PORTD0 - PORTD7 // // Each 250 ms, inverts the state of the LED on PORTD4 and displays a three bit // coun
·
www.eeworm.com/read/283534/9011269

txt readme.txt

**************************************************************************************************** ADSP-BF537 EZ-KIT Lite CAN Receive Example Analog Devices, Inc. DSP Division Three Technolo
·
www.eeworm.com/read/176523/9494937

lk main_frame.lk

main.o schedule.o cc1100.o Leds.o Uart.o timer.o power.o
·
www.eeworm.com/read/352804/10505776

txt abstract.txt

The HID project is a demo program for the Keil MCB2300 Board using the NXP LPC23xx Microcontroller. It demonstrates an USB HID (Human Interface Device): - 8 LEDs (LED0..7) - 1 Push Buttons (
·
www.eeworm.com/read/454072/7401630

html basic-pwm-project.html

 Atmel Corporation - Basic PWM Project 1.4
·
www.eeworm.com/read/247164/12677112

c main.c

/***************************************************************************** * * File Name: main.c *
·
www.eeworm.com/read/140090/13109905

txt smart_jkeymsg_7.txt

1. Make sure the LEDs (24V & 5V) are lit. 2. Put Switch Service to position 2. 3. Check the Service LED is lit. 4. Waiting the LEDs (Error, Drvier & Door) are blinking, click OK to continute.
·