代码搜索：LED
找到约 10,000 项符合「LED」的源代码
代码结果 10,000
www.eeworm.com/read/410160/11300233
obj led.obj
www.eeworm.com/read/410160/11300234
cmd led.cmd
-w
-stack 200
-heap 200
-l rts2xx.lib
MEMORY
{
PAGE 0:
VECS :o=0,l=40h
PRCT :o=40h,l=4
PROG :o=9000h,l=2000h
PAGE 1:
IDATA1:o=300h,l=100h
IDATA2:o=0c00h,l=400h
REG
www.eeworm.com/read/410160/11300334
c led.c
#include "2407c.h"
#define T1MS 0x9c3f /* 9c3fH=40000-1 */
/*ioport unsigned int port8000;
ioport unsigned int port8005;
ioport unsigned int port8007;*/
void inter
www.eeworm.com/read/410160/11300336
obj led.obj
www.eeworm.com/read/410160/11300392
cmd led.cmd
/****************************************************************************/
/* LINKER COMMAND FILE - MEMORY SPECIFICATION for C240/243 */
/* */
/****************************
www.eeworm.com/read/410160/11300393
c led.c
ioport int port8;
ioport int portc;
// 定义指示灯控制寄存器地址和寄存器类型
#define LBDS port8
// 定义拨码开关控制寄存器地址和寄存器类型
#define DIPS portc
int uWork;
main()
{int i=0;
while ( 1 )
{
LBDS=DIPS; // 读取拨码
www.eeworm.com/read/264803/11300938
h led.h
void Init_Port(void);
void SHCLK_Hi(void);
void SHCLK_Lo(void);
void STCLK_Hi(void);
void STCLK_Lo(void);
void DataOut(unsigned char nValue);
void Init_CLK(void);
www.eeworm.com/read/264803/11300941
c led.c
#include
#include "led.h"
void Init_Port(void)
{
//将P1口所有的管脚在初始化的时候设置为输入方式
P1DIR = 0;
//将P1口所有的管脚设置为一般I/O口
P1SEL = 0;
// 将P1.0 P1.1 P1.2 设置为输出方向
www.eeworm.com/read/264803/11300970
h led.h
void Init_Port(void);
void SHCLK_Hi(void);
void SHCLK_Lo(void);
void STCLK_Hi(void);
void STCLK_Lo(void);
void DataOut(unsigned char nValue);
void Init_CLK(void);
www.eeworm.com/read/264803/11300972
c led.c
#include
#include "led.h"
unsigned char seg[]={
0x3f,0x06,0x5b,0x4f, /* 0 1 2 3*/
0x66,0x6d,0x7d,0x07, /* 4 5 6 7 */
0x7f,0x6f,0x77,0x7c, /* 8 9 A B */
0x39,0x5e,0x79,0x71 /*