代码搜索：KeyScan

找到约 2,231 项符合「KeyScan」的源代码

代码结果 2,231
热门代码： main.c GPIO I2C SPI UART timer interrupt ADC PWM LED
www.eeworm.com/read/300915/6943092

asm key.asm

KEYBUF EQU 30H ORG 0 LJMP START ORG 3 LJMP KEYSCAN ORG 30H START: MOV SP,#60H SETB IT0 SETB EX0 MOV P1,#0FH SETB EA MOV KEYBUF,#47H ;将“G”送显示缓冲区，以便熄灭显示器 LOOP: LCALL DISP SJMP LO
·
www.eeworm.com/read/244654/12850668

asm keyboardlcd.asm

EN EQU P2.2 RW EQU P2.1 RS EQU P2.0 LCD EQU P0 LINE EQU 30H ROW EQU 31H VAL EQU 32H x equ 33h ORG 0000h ljmp start org 0030h START: MOV x,#00H begin:lcall keyscan lcall disp
·
www.eeworm.com/read/494431/6376382

h kaiguan.h

sbit s1=P1^0; sbit s2=P1^1; sbit s3=P1^2; uchar s1num; void keyscan() { if(s1==0) { delay(10); if(s1==0) { s1num++; while(!s1); if(s1num==1) { write_a(0x80,0x
·
www.eeworm.com/read/27339/983412

51 -

# include #define uchar unsigned char #define uint unsigned int void keyscan(void); uint a,b,c,d; /*a为舵机1的脉冲宽度，b为舵机2的脉冲宽度，单位1/1000 ms */ /*c、d为中间变量*/ /*以下定义输出管脚*/ sbit p12=P1^2; sbi
·
www.eeworm.com/read/431518/8672345

lk avr.lk

main.o KeyScan.o Menu.o MenuFSM.o MenuFunc.o MenuLanguage.o MenuMeasure.o MenuPara.o MenuSetup.o MenuTop.o MenuMain.o dir.o disk.o fat.o FDT.o file.o Interface.o RWSec.o time.o TEST_SD.o SD_Drive.o SD
·
www.eeworm.com/read/280596/10310066

c key01.c

#include void Delay(void); int KeyScan(void); int KeyProcess(void); void Init_Port(void) { //将P1口所有的管脚在初始化的时候设置为输入方式 P1DIR = 0; //将P1口所有的管脚设置为一般I/O口 P1SEL
·
www.eeworm.com/read/420526/10791923

c key01.c

#include void Delay(void); int KeyScan(void); int KeyProcess(void); void Init_Port(void) { //将P1口所有的管脚在初始化的时候设置为输入方式 P1DIR = 0; //将P1口所有的管脚设置为一般I/O口 P1SEL
·
www.eeworm.com/read/273353/10919331

c key01.c

#include void Delay(void); int KeyScan(void); int KeyProcess(void); void Init_Port(void) { //将P1口所有的管脚在初始化的时候设置为输入方式 P1DIR = 0; //将P1口所有的管脚设置为一般I/O口 P1SEL
·
www.eeworm.com/read/457311/7327527

c key01.c

#include void Delay(void); int KeyScan(void); int KeyProcess(void); void Init_Port(void) { //将P1口所有的管脚在初始化的时候设置为输入方式 P1DIR = 0; //将P1口所有的管脚设置为一般I/O口 P1SEL
·
www.eeworm.com/read/457309/7327940

c key01.c

#include void Delay(void); int KeyScan(void); int KeyProcess(void); void Init_Port(void) { //将P1口所有的管脚在初始化的时候设置为输入方式 P1DIR = 0; //将P1口所有的管脚设置为一般I/O口 P1SEL
·