代码搜索：CS2
找到约 499 项符合「CS2」的源代码
代码结果 499
www.eeworm.com/read/326717/13121496
h 12864_operate.h
sbit CS1=P2^3;
sbit CS2=P2^4;
sbit RST=P2^5;
sbit DI=P2^0;
sbit RW=P2^1;
sbit ALE=P2^2;
unsigned char COM;//指令数据寄存器
unsigned char DAT;//显示数据寄存器
//软件复位程序
void intrst(void)
{
www.eeworm.com/read/322669/13371668
txt 12864lcd.txt
XCS BIT 00H ;显示器片选0=CS1,1=CS2 ;20H-2FH为位
寻址区,位地址从00H-7FH
BZPD BIT 01H ;0=上8X8半字,1=下8X8半字
HHBZ BIT 02H
www.eeworm.com/read/316487/13522126
h dsp_arm_table.h
#define CS0 0x0ac00800
#define CS1 0x0ac00600
#define CS2 0x0ac00400
#define CS3 0x0ac00200
#define IOCS 0x0ac00004
#define GM450RL (*(volatile unsigned char *)CS0)
#define GM4
www.eeworm.com/read/315872/13535154
h 12864.h
#ifndef _12864_H__
#define _12864_H__
sbit E=P1^2; //使能端
sbit RW=P1^1; //读写端
sbit RS=P1^0; //数据命令端口
sbit CS1=P1^3;
sbit CS2=P1^4;
/****检查液晶是否忙碌***/
void chekbusy12864(void)
{
uchar da
www.eeworm.com/read/314223/13571222
asm d12887.asm
cs1 bit p2.5
cs2 bit p2.6
cs3 bit p2.7
org 00h
AJMP MAIN
ORG 30H
main:
mov sp,#6Ch
mov p0,#0ffh
mov p1,#0ffh
mov p2,#0ffh
mov p3
www.eeworm.com/read/490979/6446828
c 12864.c
#include
#define uchar unsigned char
#define uint unsigned int
#define dataport P0
sbit di=P2^2;
sbit rw=P2^3;
sbit e=P2^4;
sbit cs1=P2^0;
sbit cs2=P2^1;
sbit rst=P2^5;
uchar code
www.eeworm.com/read/339425/12237038
c led.c
//该程序实现2407的led显示
// RS BIT PA.0 ;控制线定义
// RW BIT PA.1
// E BIT PA.2
// CS1 BIT PA.3
// CS2 BIT PA.4
// BUSY BIT PA.5
// INT BIT PA.6
// RST BIT PA.7
// 数据线PB
#include
www.eeworm.com/read/252840/12261280
h cs2.h
// cs2.h : main header file for the CS2 application
//
#if !defined(AFX_CS2_H__FA3E32AA_3F21_4DA5_89A0_B82DCFF273F6__INCLUDED_)
#define AFX_CS2_H__FA3E32AA_3F21_4DA5_89A0_B82DCFF273F6__INCLUDED_
www.eeworm.com/read/337223/12383359
asm 12864.asm
;以下程式为12864不带中文字库的驱动程序（P0.0~P0.7口对应DB0~DB7）
; DI EQU P2.5
; RW EQU P2.6
; E EQU P2.7
; CS1 EQU P1.5
; CS2 EQU P1.6
; RST EQU P1.7
www.eeworm.com/read/132090/14110855
c lcd12232.c
#include "AT89X51.H"
#include
int code MAXCOL=61; //单片LCD控制的列数
#define A0 P3_7 //控制信号线
#define RW P3_6 //读写信号线
#define CS1 P3_4 //主片片选线
#define CS2 P3_5