代码搜索：Arm-Linux

找到约 1,166 项符合「Arm-Linux」的源代码

代码结果 1,166
热门代码： main.c GPIO I2C SPI UART timer interrupt ADC PWM LED
www.eeworm.com/read/455044/7378450

txt readme.txt

1、将makefile中的 CROSS =/usr/local/arm/2.95.3/bin/arm-linux- CFLAGS+=-I/usr/local/src/2.4.18-rmk7/include CFLAGS+=-I/usr/local/src/2.4.18-rmk7/include/linux CFLAGS+=-I/usr/local/arm/2.95.3/arm-linux/
·
www.eeworm.com/read/439133/7716463

txt vidcat说明.txt

如何编译成功自己的vidcat 拿到vidcat的源码后（见昨天我发的一篇帖子），经过分析，我抽取出来了三个文件：vidcat.c v4l.c v4l.h，对比修改了大概几分钟，搞定了它的编译，生成了一个60k的vidcat可执行文件，拷贝到2410上后工作正常，就是usage老显示不出来，不过无所谓了 编译之前先确定<mark>arm-linux</mark>-gcc能直接使用，并且按照说明解开完成了/friend ...
·
www.eeworm.com/read/239045/13304865

build-magic2410

#!/bin/sh rm config.cache config.status -f CC=arm-linux-gcc \ CFLAGS=-I/home/minigui_lib/include \ LDFLAGS=-L/home/minigui_lib/lib \ ./configure \ --build=i386-linux \ --target=arm-linux \
·
www.eeworm.com/read/307209/13726534

txt readme.txt

1、将makefile中的 CROSS =/usr/local/arm/2.95.3/bin/arm-linux- CFLAGS+=-I/usr/local/src/2.4.18-rmk7/include CFLAGS+=-I/usr/local/src/2.4.18-rmk7/include/linux CFLAGS+=-I/usr/local/arm/2.95.3/arm-linux/
·
www.eeworm.com/read/487747/6508184

makefile

CROSS = arm-linux- CC = $(CROSS)gcc LD = $(CROSS)ld AR = $(CROSS)ar RANLIB = $(CROSS)ranlib STRIP = $(CROSS)strip CFLAGS = -Wall -Wshadow -Wno-trigraphs -pipe LDFLAGS = -lm BIN = blob_read_e
·
www.eeworm.com/read/487747/6508186

makefile

CROSS = arm-linux- CC = $(CROSS)gcc LD = $(CROSS)ld AR = $(CROSS)ar RANLIB = $(CROSS)ranlib STRIP = $(CROSS)strip CFLAGS = -Wall -Wshadow -Wno-trigraphs -pipe LDFLAGS = -lm BIN = blob_write_e
·
www.eeworm.com/read/484011/6588796

bak build_arm.sh.bak

#!/bin/sh TSLIBINST=$(pwd)/_install export CC=/home/wbn/arm2410/tools/usr/local/arm/3.4.1/bin/arm-linux-gcc ./autogen.sh --host=arm-linux --prefix=$TSLIBINST --enable-debug make -j4 make install cd ..
·
www.eeworm.com/read/405539/11460920

build

arm-linux-gcc -g -o2 -i/usr/local/arm/2.95.3/arm-linux/include -i/friendly-arm/kernel/include/linux -i/usr/local/arm/2.95.3/arm-linux/lib -lpthread -o netvidcat vidcat.c v4l.c
·
www.eeworm.com/read/340109/12181958

makefile

OUTPUT= . CC = arm-linux-gcc MODCFLAGS = -O6 -Wall -DCONFIG_KERNELD -DMODULE -D__KERNEL__ -march=armv4 -DLinux -nostdinc -I- -I . -I/usr/local/linux/include -idirafter /usr/local/arm/lib/gcc-lib/a
·
www.eeworm.com/read/473117/6856671

txt readme.txt

1、将makefile中的 CROSS =/usr/local/arm/2.95.3/bin/arm-linux- CFLAGS+=-I/usr/local/src/2.4.18-rmk7/include CFLAGS+=-I/usr/local/src/2.4.18-rmk7/include/linux CFLAGS+=-I/usr/local/arm/2.95.3/arm-linux/
·