代码搜索：Abstract
找到约 10,000 项符合「Abstract」的源代码
代码结果 10,000
www.eeworm.com/read/252946/12252961
txt abstract.txt
The HID project is a demo program for the Keil MCB2300
Board using the NXP LPC23xx Microcontroller.
It demonstrates an USB HID (Human Interface Device):
- 8 LEDs (LED0..7)
- 1 Push Buttons (
www.eeworm.com/read/251156/12360538
txt abstract.txt
The Blinky project is a simple program for the LPC2468
using Embedded Artists boards:
Daughter Board - 'LPC2468 OEM Board v1.1'
Mother Board - 'OEM Base Board Basic v1.1'
and demonstrating i
www.eeworm.com/read/337388/12373285
txt abstract.txt
The Blinky project is an example program for the AT91SAM9260
using Atmel AT91SAM9260-EK Evaluation Board and demonstrating
interrupt usage.
Example functionality:
www.eeworm.com/read/337388/12373319
txt abstract.txt
SAM9260 DF P1056 CS1
SAM9260 DataFlash Page 1056 bytes on Chip Select 1
The 2-nd level Bootloader for Atmel AT91SAM9260
running from External DataFlash (Page Size 1056
Byte
www.eeworm.com/read/149458/12376684
txt abstract.txt
The HELLO program is a very simple program that prints "Hello World"
to the serial port of the LPC9xx controller. When you can successfully
build and run this program, you have used the entire too
www.eeworm.com/read/149458/12376705
txt abstract.txt
The BLINKY program is a very simple program that blinks the LED's on
connected to Port 2 of the MCB900 or EPM900. When you can successfully
build and run this program, you have used the entire too
www.eeworm.com/read/149457/12376744
txt abstract.txt
The Blinky project is a simple program for the Infineon XC866
using the Keil MCB-XC866 Evaluation Board.
It blinks the LEDs prints HELLO to the UART interface.
The Blinky program is available i
www.eeworm.com/read/149457/12376809
txt abstract.txt
The ADC project outputs the voltage on the A/D converter input
AIN6 (which is the potentiometer on the MCBXC866 Board) as
binary value to the LEDs on P3.0 - P3.7.
The ADC program is available
www.eeworm.com/read/149457/12376863
txt abstract.txt
The CC6 project uses the Timers and the CAPCOM6 Unit
of the XC866 device to modulate the LEDs on P3.0 - P3.7.
The CC6 program is available in different targets:
Simulator: runs in so
www.eeworm.com/read/149456/12376987
txt abstract.txt
This program is a bank switching example that shows how you can
run (simulate) code executing in several code banks.