代码搜索：Abstract

找到约 10,000 项符合「Abstract」的源代码

代码结果 10,000
热门代码： main.c GPIO I2C SPI UART timer interrupt ADC PWM LED
www.eeworm.com/read/153696/12011928

txt abstract.txt

Analog to Digital Converter Example Program =========================================== Project: ADC This example project shows how to configure and use the A/D Converter of the following micro
·
www.eeworm.com/read/341533/12078746

txt abstract.txt

The Memory project is a demo program for the AT91SAM7S64 using Atmel AT91SAM7S-EK Microcontroller Board. It demonstrates an USB Memory based on USB Mass Storage Class. LEDs are used to display
·
www.eeworm.com/read/341532/12078811

txt abstract.txt

This is a simple RTX Kernel based example which simulates the step-motor driver. Four LEDs are blinking simulating the activation of the four output driver stages: - phase A - phase B - phase C
·
www.eeworm.com/read/341531/12078861

txt abstract.txt

The Mouse project is a demo program for the AT91SAM7S64 using Atmel AT91SAM7S-EK Microcontroller Board. It demonstrates an USB Mouse based on USB HID. Since there are only 4 Push Buttons (SW1..
·
www.eeworm.com/read/341530/12078923

txt abstract.txt

The HID project is a demo program for the AT91SAM7S64 using Atmel AT91SAM7S-EK Microcontroller Board. It demonstrates an USB HID (Human Interface Device): - 4 LEDs (LED1..4) - 4 Push Buttons
·
www.eeworm.com/read/341529/12078992

txt abstract.txt

The Hello project is a demo program for the AT91SAM7S64 using Atmel AT91SAM7S Microcontroller Board. It prints "Hello World" to the serial port and blinks LEDs according to the push buttons on th
·
www.eeworm.com/read/341526/12079826

txt abstract.txt

The Blinky project is a simple program for the AT91SAM7S64 using Atmel AT91SAM7S-EK Microcontroller Board. It blinks the 4 LEDs on the board. Blinking speed can be changed by the switch buttons
·
www.eeworm.com/read/152371/12118775

txt abstract.txt

Analog to Digital Converter Example Program =========================================== Project: ADC Author: Brian Clough This example program shows how to configure and use the 8 bit A/D Conv
·
www.eeworm.com/read/151829/12172072

txt abstract.txt

Pulse Width Measurement Example Program ======================================= This example program shows how to compute the width of a pulse using timer0 in mode 1. Port 3.2 is used as an extern
·
www.eeworm.com/read/253498/12219140

txt abstract.txt

The Memory project is a demo program for the Keil MCB2140 Board using the Philips LPC2148 Microcontroller. It demonstrates an USB Memory based on USB Mass Storage Class. LEDs are used to displa
·