代码搜索：Abstract

找到约 10,000 项符合「Abstract」的源代码

代码结果 10,000
热门代码： main.c GPIO I2C SPI UART timer interrupt ADC PWM LED
www.eeworm.com/read/150372/5693586

txt abstract.txt

The ADI project shows how to setup the tools for using the extended features of the Analog Devices ADuC83x. Compared to the classic 8051 architecture the ADuC83x core provides you with following
·
www.eeworm.com/read/150372/5693591

txt abstract.txt

LPC932 EXAMPLE: CREATING A PWM SIGNAL USING A TIMER IN MODE 6 Christian Kulig, 12/06/02 INTRODUCTION: The LPC932 can be used to create a Pulse Width Modulated PWM signal. That's an analog signa
·
www.eeworm.com/read/150372/5693597

txt abstract.txt

The HELLO program is a very simple program that prints "Hello World" to the serial port of the LPC9xx controller. When you can successfully build and run this program, you have used the entire too
·
www.eeworm.com/read/150372/5693602

txt abstract.txt

The BLINKY program is a very simple program that blinks the LED's on connected to Port 2 of the MCB900 or EPM900. When you can successfully build and run this program, you have used the entire too
·
www.eeworm.com/read/150372/5693604

txt abstract.txt

LPC932 EXAMPLE: COMMUNICATION WITH THE PC USING THE SERIAL INTERFACE (UART) Christian Kulig, 12/05/02 INTRODUCTION: The LPC932 has an enhanced UART which is compatible with the conventional 80C51
·
www.eeworm.com/read/150372/5693611

txt abstract.txt

The MEASURE program uses the Port1 and Port2 inputs of the P89LPC932 to simulate a datalogger. This MEASURE program is available in several targets: Simulator: for 礦ision2 Debugger t
·
www.eeworm.com/read/150372/5693617

txt abstract.txt

LPC932 EXAMPLE: USING THE EEPROM TO SAVE DATA DURING POWER OFF Christian Kulig, 12/06/02 INTRODUCTION: The EEPROM of the LPC932 is a nonvolatile memory for storing parameter or certain data. The
·
www.eeworm.com/read/150372/5693628

txt abstract.txt

LPC932 EXAMPLE: CREATING PWM SIGNALS USING THE CAPTURE COMPARE UNIT (CCU) Christian Kulig, 12/06/02 INTRODUCTION: The LPC932 can be used to create Pulse Width Modulated PWM signals. With a PW
·
www.eeworm.com/read/150372/5693633

txt abstract.txt

LPC932 EXAMPLE: AUTOCALIBRATION OF INTERNAL LOW POWER OSCILLATOR FOR CLOCKING THE UART Christian Kulig, 12/06/02 INTRODUCTION: The LPC932 provides a numb
·
www.eeworm.com/read/150372/5693643

txt abstract.txt

The CSAMPLE program implements a simple addition and subtraction calculator. Numbers and operators are entered via serial I/O. The CSAMPLE program is available in different targets: Standard:
·