代码搜索：高精度电压基准

找到约 4,235 项符合「高精度电压基准」的源代码

代码结果 4,235
热门代码： main.c GPIO I2C SPI UART timer interrupt ADC PWM LED
www.eeworm.com/read/218201/14931524

ini db.ini

[DATABASE] UDL=MyDbSource.udl [INPUT TABLE] TableName=设备信息表 Field=0,ID,int,primary Field=1,公司名称,string,primary Field=2,变电站名,string,primary Field=3,电压等级,string,primary Field=4,间隔名称,string,pri
·
www.eeworm.com/read/208223/15250742

c ad.c

#include "Include.h" //得到电源电压 unsigned char GetVoltage(void) { unsigned char i=0; unsigned int t=0; ADMUX=0x04;//选择ADC通道4 ADMUX|=(1
·
www.eeworm.com/read/207726/15263365

m f7_11.m

%读入EEG信号 load eeg.mat; %sig=eeg(2,1:512)'; sig=eeg(1:512,:); N=length(sig); %采样频率 fs=312.5; %时域波形 figure(1); plot((1:N)/fs,sig,'LineWidth',2); xlabel('时间 t/s'); ylabel('电压 A/uV'); %计算谱
·
www.eeworm.com/read/206613/15293062

c rtl8019.c

/*修改说明:加高电压后,去掉了SetRegPage中判断net_start标志*/ #include "../inc/config.h" #include "../inc/board.h" #include "tftp/Emac.h" #include "tftp/eth.h" #include "tftp/mac.h" #include "utils.h" #include
·
www.eeworm.com/read/206597/15293400

c rtl8019.c

/*修改说明:加高电压后,去掉了SetRegPage中判断net_start标志*/ #include "../inc/config.h" #include "../inc/board.h" #include "tftp/Emac.h" #include "tftp/eth.h" #include "tftp/mac.h" #include "utils.h" #include
·
www.eeworm.com/read/4686/38051

asm 正弦波.asm

;单路正弦波电压输出vpp(-5_5v) MOV R5,#00H SIN:MOV A,R5 MOV DPTR,#TABH MOVC A,@A+DPTR MOV DPTR,#0DFFFH MOVX @DPTR,A INC R5 AJMP SIN TA
·
www.eeworm.com/read/4710/39001

asm 正弦波.asm

;单路正弦波电压输出vpp(-5_5v) MOV R5,#00H SIN:MOV A,R5 MOV DPTR,#TABH MOVC A,@A+DPTR MOV DPTR,#0DFFFH MOVX @DPTR,A INC R5 AJMP SIN TA
·
www.eeworm.com/read/7225/109366

asm 正弦波.asm

;单路正弦波电压输出vpp(-5_5v) MOV R5,#00H SIN:MOV A,R5 MOV DPTR,#TABH MOVC A,@A+DPTR MOV DPTR,#0DFFFH MOVX @DPTR,A INC R5 AJMP SIN TA
·
www.eeworm.com/read/7268/114107

asm 正弦波.asm

;单路正弦波电压输出vpp(-5_5v) MOV R5,#00H SIN:MOV A,R5 MOV DPTR,#TABH MOVC A,@A+DPTR MOV DPTR,#0DFFFH MOVX @DPTR,A INC R5 AJMP SIN TA
·
www.eeworm.com/read/7326/115482

c comparator.c

/**************************************************************************** 文件名：comparator.c 编写者：czhang 描述：适用比较器A进行斜边AD转换。CA0接待测电压，CA1接充放电电容。 MCLK：8MHz ACLK：32.768kHz 用于MSP430F13
·