代码搜索：脉冲信号

找到约 10,000 项符合「脉冲信号」的源代码

代码结果 10,000
热门代码： main.c GPIO I2C SPI UART timer interrupt ADC PWM LED
www.eeworm.com/read/438645/7728749

c ceshi3.c

#include "PL3105.h" #define uchar unsigned char #define uint unsigned int /*常量定义*/ #define CHECK_TIME 600 //3秒钟 #define PULSE_DZ_CN 5 //待测表收到PULSE_DZ_CN个脉冲后,显示误差 #define PULSE_JX_C
·
www.eeworm.com/read/438645/7728751

c ceshi2.c

#include "PL3105.h" #define uchar unsigned char #define uint unsigned int /*常量定义*/ #define CHECK_TIME 600 //3秒钟 #define PULSE_DZ_CN 5 //电子表收到PULSE_DZ_CN个脉冲后,显示误差 #define PULSE_JX_C
·
www.eeworm.com/read/438645/7728752

c ceshi4.c

#include "PL3105.h" #define uchar unsigned char #define uint unsigned int /*常量定义*/ #define CHECK_TIME 600 //3秒钟 #define PULSE_DZ_CN 5 //待测表收到PULSE_DZ_CN个脉冲后,显示误差 #define PULSE_JX_C
·
www.eeworm.com/read/435864/7782479

c inter.c

#include "spce061a.h" #include "MyBit.h" long Fre_Div_A=0; //定义频率存放变量，不是真正的频率，而是特定时间内的脉冲数量 long Fre_Div_B=0; long Fre=0; //频率 int TranCompleteFlag=0; //转换完成标志 in
·
www.eeworm.com/read/241015/13178767

txt readme.txt

该程序使每次CPU响应外部中断IRQ3时显示字符串“THIS IS A 8259A INTERRUPT!”。中断10次后，程序返回DOS。 中断请求通过ISA总线的IRQ3端输入，中断源用单脉冲源代替（来自实验箱）。
·
www.eeworm.com/read/239241/13293036

c 51init.c

#include #include "intrins.h" unsigned int Ri=0;//pwm脉冲宽度 |R_PWM unsigned int Rj=0;//pwm低电平宽度， |R_PWM unsigned int Ro=0;//pwm |R_PWM unsigned int Rp=0;//pwm |R_PWM uns
·
www.eeworm.com/read/137510/13318392

c 分光分色子.c

#include extern unsigned char power; extern unsigned int rgb[4],rgba[3]; extern unsigned char zx,th0; unsigned char sxy; unsigned int gggg; sbit S0=P1^5; //移位脉冲 sbit S1=P1^6; sbit
·
www.eeworm.com/read/493518/6395012

plg atm.plg

礦ision2 Build Log Project: C:\Documents and Settings\Administrator\桌面\program\脉冲输出(加减速)\ATM.uv2 Project File Date: 12/27/2008 Output:
·
www.eeworm.com/read/261863/11618109

asm e2.asm

PWMH DATA 30H //高电平脉冲的个数 PWM DATA 31H //PWM周期 COUNTER DATA 32H TEMP DATA 33H ORG 0000H AJMP MAIN ORG 000BH AJMP INTT0 ORG 0100H MAIN: MOV S
·
www.eeworm.com/read/234461/14111852

h lcd1602.h

#define RDATA XBYTE[0xc300] #define RCMD XBYTE[0xc200] #define WDATA XBYTE[0xc100] #define WCMD XBYTE[0xc000] void writecmd(uchar cmd,uchar i);//写入命令rs=0,rw=0 E高脉冲有效 void writedata(uchar ddata);/
·