代码搜索：病毒检测
找到约 6,985 项符合「病毒检测」的源代码
代码结果 6,985
www.eeworm.com/read/161133/10446631
m dsss_multiuser.m
%在DS-spread spectrum系统中,噪声为加性高斯白噪声,验证性能,传统单用户检测
clear all
close all
clc;
%[1]initial Parameter
K=4; %用户数
Lc=32;%扩频增益
x_num=5000;%信息序列长度
SNRindB=-20:3:10;
Tc=1;
Ts=Lc*Tc;
for i=1:length(
www.eeworm.com/read/159820/10614514
c eeprom.c
/*
eeprom_is_ready() //EEPROM 忙检测（返回EEWE 位）
eeprom_busy_wait() //查询等待EEPROM 准备就绪
uint8_t eeprom_read_byte (const uint8_t *addr) //从指定地址读一字节
uint16_t eeprom_read_word (const uint16_t *addr) //从指定地址
www.eeworm.com/read/351121/10678920
plg keycheck.plg
礦ision3 Build Log
Project:
E:\McuTest\HX-MCS8051-III\KEIL环境下ASM演示程序\键盘检测\KEYCHECK.uv2
Project File Date: 03/24/2007
Output:
Build target 'Targ
www.eeworm.com/read/275558/10811985
c tcmain.c
/*-------------------------------
温度控制器
显示为三个共阳极LED
温度传感器用单总线DS18B20
CPU为89C51，三个按键，分别为UP，DOWN，SET
2个检测,
温度调节上限为125度，下限为-55度
-------------------------------*/
#include
#include
www.eeworm.com/read/417451/10989607
c menu.c
uchar code OneTab[][5]={
{8, 9, 7, 23,0},//时间日期
{18,19,14,15,0},//温度检测
{26,27,15,28,0},//信号测量
{10,11,12,13,0},//数据采集
{10,11,16,17,0}//数据处理
};
uchar code CHXTab[][5]={
{33,34, 1, 42,0},//
www.eeworm.com/read/270729/11028714
txt eeprom.txt
//eeprom指令定义
#define F_READ 0x01 /*读取页*/
#define F_WRITE 0x02 /*写入页*/
#define F_VERIFY 0x04 /*检测页*/
#define F_ERASE 0x05 /*擦除页*/
#define F_ERASEALL 0x06 /*全部擦除*/
unsigned char flash_re
www.eeworm.com/read/465282/7052678
m snr.m
%本程序为计算不同信噪比下三种检测器的误码率
%信噪比分别为从1到10
%function [P,Q,R]=SNR(usernum,gain,information)
clc;
clear;
usernum = 5;
gain = 30;
num = 2000;
for m=1:8
p(1,m)=lmd(usernum,gain,num,m);%调用子程序计算传统
www.eeworm.com/read/464881/7061696
m iir.m
%实时检测QRS复波，采样率1000HZ
filename='D:\数据\蔡刿.mat';
load(filename);
ecgdata=data(:,2);
ecg=ecgdata(1:2000);
M=fs/50;
%------------lp,截至频率11HZ，延迟5个采样点，增益36
a=[1 zeros(1,M-1) -2 zeros(1,M-1) 1];
b=[
www.eeworm.com/read/464618/7066636
h lcd.h
#include
sbit LCD_RW=P2^6;
sbit LCD_RS=P2^5;
sbit LCD_E=P2^7;
#define LCD_DATA P0
void delayus(unsigned int num) //us级延时函数
{while( num-- );}
bit LCD_Busy(void) //LCD忙碌状态检测