代码搜索：电阻元件
找到约 3,633 项符合「电阻元件」的源代码
代码结果 3,633
www.eeworm.com/read/132792/14072764
v full_add5.v
module full_add5(a,b,cin,sum,cout);
input a,b,cin;
output sum,cout;
reg cout,m1,m2,m3; //在always块中被赋值的变量应定义为reg型
wire s1;
xor x1(s1,a,b); //调用门元件
always @(a or b or cin) //
www.eeworm.com/read/203569/15355609
v full_add5.v
module full_add5(a,b,cin,sum,cout);
input a,b,cin;
output sum,cout;
reg cout,m1,m2,m3; //在always块中被赋值的变量应定义为reg型
wire s1;
xor x1(s1,a,b); //调用门元件
always @(a or b or cin) //
www.eeworm.com/read/201721/15398205
v full_add5.v
module full_add5(a,b,cin,sum,cout);
input a,b,cin;
output sum,cout;
reg cout,m1,m2,m3; //在always块中被赋值的变量应定义为reg型
wire s1;
xor x1(s1,a,b); //调用门元件
always @(a or b or cin) //
www.eeworm.com/read/200854/15421769
v full_add5.v
module full_add5(a,b,cin,sum,cout);
input a,b,cin;
output sum,cout;
reg cout,m1,m2,m3; //在always块中被赋值的变量应定义为reg型
wire s1;
xor x1(s1,a,b); //调用门元件
always @(a or b or cin) //
www.eeworm.com/read/109800/15548125
v full_add5.v
module full_add5(a,b,cin,sum,cout);
input a,b,cin;
output sum,cout;
reg cout,m1,m2,m3; //在always块中被赋值的变量应定义为reg型
wire s1;
xor x1(s1,a,b); //调用门元件
always @(a or b or cin) //
www.eeworm.com/read/109799/15548277
v full_add5.v
module full_add5(a,b,cin,sum,cout);
input a,b,cin;
output sum,cout;
reg cout,m1,m2,m3; //在always块中被赋值的变量应定义为reg型
wire s1;
xor x1(s1,a,b); //调用门元件
always @(a or b or cin) //
www.eeworm.com/read/287857/8664224
c music.c
#include
#include
#include "do_le_mi.h"
int T=0xFF00;
int N=0xFF00;
void GPIO_INIT(void)
{
DDRB=0x00; //定义 PB为输入
//SFIOR&=~BIT(PUD); // SFIOR寄存器的上拉电阻控制位PUD置0，
PORT
www.eeworm.com/read/287857/8664257
_c music._c
#include
#include
#include "do_le_mi.h"
int T=0xFF00;
int N=0xFF00;
void GPIO_INIT(void)
{
DDRB=0x00; //定义 PB为输入
//SFIOR&=~BIT(PUD); // SFIOR寄存器的上拉电阻控制位PUD置0，
PORT
www.eeworm.com/read/419736/10840039
_c slave_test._c
#include "config.h"
volatile uint8 main_tmp=0;
extern volatile uint8 main_tmp=0;
void main(void)
{
DDRC=0X00;
PORTC=0x03; //使能内部上拉电阻
DDRA=0xff;
twi_slave_init(0x50); //初始化为从机，地址0x01。
www.eeworm.com/read/419499/10864233
c spi.c
#include
#define _V_SPI_
#define SPI_PORT PORTB
#define SPI_DDR DDRB
#define SPI_PIN PINB
#define DS1302_MOSI 5 //PB5 MOSI要串10K电阻到MISO，然后把MISO跟DS1302_IO脚短接在一起的
#define DS1302_M