代码搜索：实时接收

找到约 10,000 项符合「实时接收」的源代码

代码结果 10,000
热门代码： main.c GPIO I2C SPI UART timer interrupt ADC PWM LED
www.eeworm.com/read/450415/7484202

m bd.m

% 论文仿真原型程序,仿真四种（ZF,ZF-SIC,MMSE,MMSE-SIC） Vblast接收机的检测性能，绘制误比特率～信噪比曲线。 % Zhaidewei 2007.4.18 (2007-5-20修正版) % Email:zeal0502@yahoo.com.cn % qq:402731924 % 发端初始化===================================
·
www.eeworm.com/read/442886/7642730

m51 lcdc_040.m51

BL51 BANKED LINKER/LOCATER V5.03 04/24/2008 16:47:16 PAGE 1 BL51 BANKED LINKER/LOCATER V5.03, INVOKED BY: C:\KEIL\C51\BIN\BL51.EXE D:\XHL\CAN接收程序\LCDC_040.OBJ TO D:\XHL\单片机资料\ >>
·
www.eeworm.com/read/442577/7649325

m rx_combine.m

function [symbol_sequence,bit_sequence]=rx_combine(rx,channel,use_relay,Ps); %在接收端合并两路信号,并判决出发送信号序列 global signal; global relay; values2analyse=rx.signal2analyse; if (use_relay==1)&(relay.mag
·
www.eeworm.com/read/399878/7828941

c tf.c

#include #include void main(void) { unsigned char True = 1; //定义 unsigned char False = 0; SCON = 0x50; //串口方式1,允许接收 TMOD = 0x20; //定时器1定时方式2 TH1 = 0xE8; //11.059
·
www.eeworm.com/read/399878/7828956

c 7-2.c

#include #include void main(void) { unsigned char True = 1; //定义 unsigned char False = 0; SCON = 0x50; //串口方式1,允许接收 TMOD = 0x20; //定时器1定时方式2 TH1 = 0xE8; //11.059
·
www.eeworm.com/read/299689/7839016

c 7-2.c

#include #include void main(void) { unsigned char True = 1; //定义 unsigned char False = 0; SCON = 0x50; //串口方式1,允许接收 TMOD = 0x20; //定时器1定时方式2 TH1 = 0xE8; //11.059
·
www.eeworm.com/read/199052/7892487

c 7-2.c

#include #include void main(void) { unsigned char True = 1; //定义 unsigned char False = 0; SCON = 0x50; //串口方式1,允许接收 TMOD = 0x20; //定时器1定时方式2 TH1 = 0xE8; //11.059
·
www.eeworm.com/read/295737/8142868

ini test.ini

signal void ky_1() { SIN = 0xf0; //串口接收到数据0xf0,注意它是不需要时间的 twatch(4090); //等待4090个机器周期 SIN = 0xf1; twatch(4090); SIN = 0x01; twatch(4090); SIN = 0x1e;
·
www.eeworm.com/read/295737/8142934

ini test.ini

signal void ky_1() { SIN = 0xf0; //串口接收到数据0xf0,注意它是不需要时间的 twatch(4090); //等待4090个机器周期 SIN = 0xf1; twatch(4090); SIN = 0x01; twatch(4090); SIN = 0x1e;
·
www.eeworm.com/read/144572/12784490

c my_nrf905.c

//此程序没有加接收反回指令 // #include #include #include /************timer0定时中断***********/ void timer0(void) interrupt 1 using 0 { TH0=timer0h; TL0=timer0l; d
·