代码搜索：实时接收
找到约 10,000 项符合「实时接收」的源代码
代码结果 10,000
www.eeworm.com/read/314772/13559444
plg infrared_receive_lcd.plg
礦ision2 Build Log
Project:
H:\红外-发-收 -LCD-显示\红外接收\Infrared_Receive_Lcd.uv2
Project File Date: 04/06/2008
Output:
www.eeworm.com/read/314306/13569476
c main.c
/*Main.c*/
/*串口发送与中断接收程序,波特率设置为4800*/
//485 是半双工，发送和接受不能同时工作；
#include "global.c"
void SystemInit();
void Timer1Init();
void KickDog();
void SCI_Init();
void SCI_Send();
int numled0=20
www.eeworm.com/read/314175/13572570
c main.c
/*Main.c*/
/*CAN发送与接收程序,波特率设置为125kbps,标准帧,ID=0x024*/
#include "global.c"
void SystemInit();
void Timer1Init();
void KickDog();
void Can_Init();
void Can_Send();
int numled0=200;
unsig
www.eeworm.com/read/312910/13601693
m ultrasonic_m_echo_sin.m
clear all;close all;
%=============================
fs=10E7; % 采样率100MHz
fTR=1E7; % 发射波/回波中心频率10MHz
WTR=fTR*2*pi; % 发射波/回波中心角频率,rad/S
NT=1024;
NR=NT; % 接收回波：50u
www.eeworm.com/read/312848/13603449
plg i2c.plg
礦ision3 Build Log
Project:
F:\TS流接收配置\I2C调试\i2c.uv2
Project File Date: 09/18/2007
Output:
www.eeworm.com/read/312524/13610641
txt 2401.txt
void Config_RF_rtchange(char tr_id)
{
unsigned char cfg_byte;
unsigned char temp_sdi_byte; //为SPI协议的SDI端定义临时变量
cfg_byte = 0x04;
// 接收模式
if (tr_id=='r') cfg_byte = 0x05;
//先进入
www.eeworm.com/read/310902/13641596
ini test.ini
signal void ky_1()
{
SIN = 0xf0; //串口接收到数据0xf0,注意它是不需要时间的
twatch(4090); //等待4090个机器周期
SIN = 0xf1;
twatch(4090);
SIN = 0xf0;
twatch(4090);
SIN = 0xf0;
www.eeworm.com/read/309772/13664730
h ymodem.h
#ifndef __XYMODEM_H_
#define __XYMODEM_H_
#define MODEM_MAX_RETRIES 10 //接收等待延时时间
#define MODEM_SOH 0x01 //数据块起始字符
#define MODEM_STX 0x02
#define MODEM_EOT 0x04
#define MODEM_AC
www.eeworm.com/read/309617/13667704
txt can 总线通信实验.txt
//Main.c
//CAN发送与接收程序,波特率设置为125kbps,标准帧,ID=0x024
#include "global.c"
void SystemInit();
void Timer1Init();
void KickDog();
void Can_Init();
void Can_Send();
int numled0=200;
unsigned i
www.eeworm.com/read/305168/13777563
ini test.ini
signal void ky_1()
{
SIN = 0xf0; //串口接收到数据0xf0,注意它是不需要时间的
twatch(4090); //等待4090个机器周期
SIN = 0xf1;
twatch(4090);
SIN = 0xf0;
twatch(4090);
SIN = 0xf0;