代码搜索：定时灯
找到约 10,000 项符合「定时灯」的源代码
代码结果 10,000
www.eeworm.com/read/457112/7334106
c timer.c
#include "timer.h"
#include "main.h"
#include "keyboard.h"
#include "led.h"
unsigned char display_buffer[4]; //显示缓冲区,共4位
unsigned char minute=0; //定义默认定时时间
unsigned char secon
www.eeworm.com/read/455604/7369619
c sh502.c
#include
#include
#define uchar unsigned char
#define uint unsigned int
uint FREQ; /*定时器计数变量*/
uint FREQ_out; /*输出频率变量*/
uint delay;
sbit SEL0=P3^0;
sbit
www.eeworm.com/read/455597/7369686
c sh406.c
#include
#include
#include
#define uchar unsigned char
#define uint unsigned int
uchar data BUFFER[1]={0}; /*定时器计数变量*/
sbit PR=P2^2; // 定义语音芯片的控制端口，
www.eeworm.com/read/452608/7436848
c usart.c
#include "msp430x42x.h"
#include "Global.h"
#include "USART.h"
#include "Measure.h" // 测量值
// 串口检查定时器周期(最小4个字节长度时间)
#define TIMER_INTERVAL (15729) // 15ms @
www.eeworm.com/read/449482/7503518
c serial.c
#include
sbit BT_SND =P1^0;
sbit BT_REC =P1^1;
/**********************************************
IO 口模拟232通讯程序
使用两种方式的C程序 占用定时器0
********************************************
www.eeworm.com/read/436276/7773090
c time.c
#include "ioCC2430.h"
#include "hal.h"
void init_TIMER1()//初始化定时器1
{
CLKCON |= 0x28;// TICKSPD IS 1MHz
EA =1;
//p1 interrupt enable
// PICTL &=~0X02; // r
www.eeworm.com/read/198899/7904269
c 10-5.c
#include
#include
#include
#define uchar unsigned char
#define uint unsigned int
uchar data BUFFER[1]={0}; /*定时器计数变量*/
sbit PR=P2^2; // 定义语音芯片的控制端口，
www.eeworm.com/read/296467/8101563
c test44x_wdt03.c
#include
void main(void)
{
WDTCTL = WDT_ADLY_250; // 设置看门狗定时时间为0.25ms
IE1 |= WDTIE; // WDT使能
P1DIR |= 0x01; //
www.eeworm.com/read/243968/12902988
c sh502.c
#include
#include
#define uchar unsigned char
#define uint unsigned int
uint FREQ; /*定时器计数变量*/
uint FREQ_out; /*输出频率变量*/
uint delay;
sbit SEL0=P3^0;
sbit