代码搜索：定时灯

找到约 10,000 项符合「定时灯」的源代码

代码结果 10,000
热门代码： main.c GPIO I2C SPI UART timer interrupt ADC PWM LED
www.eeworm.com/read/274092/10888213

frm counter_form.frm

VERSION 5.00 Object = "{6B7E6392-850A-101B-AFC0-4210102A8DA7}#1.3#0"; "comctl32.ocx" Begin VB.Form Counter_Form Caption = "定时计数器3路" ClientHeight = 9330 ClientLeft =
·
www.eeworm.com/read/272827/10942515

c sh502.c

#include #include #define uchar unsigned char #define uint unsigned int uint FREQ; /*定时器计数变量*/ uint FREQ_out; /*输出频率变量*/ uint delay; sbit SEL0=P3^0; sbit
·
www.eeworm.com/read/272827/10942527

c sh406.c

#include #include #include #define uchar unsigned char #define uint unsigned int uchar data BUFFER[1]={0}; /*定时器计数变量*/ sbit PR=P2^2; // 定义语音芯片的控制端口，
·
www.eeworm.com/read/271405/10998028

c sh502.c

#include #include #define uchar unsigned char #define uint unsigned int uint FREQ; /*定时器计数变量*/ uint FREQ_out; /*输出频率变量*/ uint delay; sbit SEL0=P3^0; sbit
·
www.eeworm.com/read/271405/10998033

c sh406.c

#include #include #include #define uchar unsigned char #define uint unsigned int uchar data BUFFER[1]={0}; /*定时器计数变量*/ sbit PR=P2^2; // 定义语音芯片的控制端口，
·
www.eeworm.com/read/270775/11026060

txt 8253.txt

利用8253的0#通道来定时中断（IRQ0），循环显示“0”－“9”十个数 STACK SEGMENT STACK DW 64 DUP (?) STACK ENDS CODE SEGMENT ASSUME CS:CODE START: PUSH DS MOV AX,0000H
·
www.eeworm.com/read/201736/6941198

c sh406.c

#include #include #include #define uchar unsigned char #define uint unsigned int uchar data BUFFER[1]={0}; /*定时器计数变量*/ sbit PR=P2^2; // 定义语音芯片的控制端口，
·
www.eeworm.com/read/468607/6985821

c sh502.c

#include #include #define uchar unsigned char #define uint unsigned int uint FREQ; /*定时器计数变量*/ uint FREQ_out; /*输出频率变量*/ uint delay; sbit SEL0=P3^0; sbit
·
www.eeworm.com/read/468607/6985825

c sh406.c

#include #include #include #define uchar unsigned char #define uint unsigned int uchar data BUFFER[1]={0}; /*定时器计数变量*/ sbit PR=P2^2; // 定义语音芯片的控制端口，
·
www.eeworm.com/read/461797/7219276

c main.c

/****************************调试问题************************************* 1，当用DCO设置的频率太高的话，会使程序跑飞 2, TimerB 有定时器中断和溢出中断，注意理解 3,TimerB在转载时有问题，主要采用实时赋值的方法时，可正常运行 ***************************************
·