代码搜索：定时报警

找到约 10,000 项符合「定时报警」的源代码

代码结果 10,000
热门代码： main.c GPIO I2C SPI UART timer interrupt ADC PWM LED
www.eeworm.com/read/19087/809017

asm interrupt.asm

SECOND EQU 30H COUNT EQU 31H ORG 00H LJMP START ORG 0BH ;定时器0中断入口 LJMP INT_T0 START: MOV SECOND,#00H MOV COUNT,#00H MOV DPTR,#TABLE ;段码表首地址 MOV P0,#3FH
·
www.eeworm.com/read/19091/810152

asm interrupt.asm

SECOND EQU 30H COUNT EQU 31H ORG 00H LJMP START ORG 0BH ;定时器0中断入口 LJMP INT_T0 START: MOV SECOND,#00H MOV COUNT,#00H MOV DPTR,#TABLE ;段码表首地址 MOV P0,#3FH
·
www.eeworm.com/read/19111/811465

asm ex5-6.asm

ORG 0000H ;复位地址 LJMP MAIN ;跳转到主程序 ORG 0030H ;主程序入口地址 MAIN: MOV TMOD,#90H ;T1工作于定时方式1，GATE=1 MOV TL1, #00H ;计数初值设为0 MOV TH1, #00H ;当fosc为
·
www.eeworm.com/read/19121/812085

h main.h

#include "data_type.h" #define TIMER0H 0xf9 //定时0的最大间隔 1000us=1536= 0x6f 0x1f #define TIMER0L 0xff // #define WDT_CONTRVAL 0x3c #define XORSTART 0xff
·
www.eeworm.com/read/19154/815851

asm interrupt.asm

SECOND EQU 30H COUNT EQU 31H ORG 00H LJMP START ORG 0BH ;定时器0中断入口 LJMP INT_T0 START: MOV SECOND,#00H MOV COUNT,#00H MOV DPTR,#TABLE ;段码表首地址 MOV P0,#3FH
·
www.eeworm.com/read/19160/818823

asm timer application (1).asm

SECOND EQU 30H COUNT EQU 31H ORG 00H LJMP START ORG 0BH ;定时器0中断入口 LJMP INT_T0 START: MOV SECOND,#00H MOV COUNT,#00H MOV DPTR,#TABLE ;段码表首地址 MOV P0,#3FH
·
www.eeworm.com/read/19164/819810

asm interrupt.asm

SECOND EQU 30H COUNT EQU 31H ORG 00H LJMP START ORG 0BH ;定时器0中断入口 LJMP INT_T0 START: MOV SECOND,#00H MOV COUNT,#00H MOV DPTR,#TABLE ;段码表首地址 MOV P0,#3FH
·
www.eeworm.com/read/19176/823167

asm timer application (1).asm

SECOND EQU 30H COUNT EQU 31H ORG 00H LJMP START ORG 0BH ;定时器0中断入口 LJMP INT_T0 START: MOV SECOND,#00H MOV COUNT,#00H MOV DPTR,#TABLE ;段码表首地址 MOV P0,#3FH
·
www.eeworm.com/read/19261/830203

asm interrupt.asm

SECOND EQU 30H COUNT EQU 31H ORG 00H LJMP START ORG 0BH ;定时器0中断入口 LJMP INT_T0 START: MOV SECOND,#00H MOV COUNT,#00H MOV DPTR,#TABLE ;段码表首地址 MOV P0,#3FH
·
www.eeworm.com/read/25215/846265

c 12-3-8.c

#include //头文件 #include void main(void) //主函数 { SCON=0x50; //串口模式1，允许接收 TMOD|=0x20; //初始化T1为定时功能，模式2 PCON|=0x80; //设置SMOD=1 TL1=0xF4;
·