代码搜索：多信号

找到约 10,000 项符合「多信号」的源代码

代码结果 10,000
热门代码： main.c GPIO I2C SPI UART timer interrupt ADC PWM LED
www.eeworm.com/read/337166/12386710

m ex3-11-2.m

% 数字滤波 t=linspace(0,10,100); %定一时间轴 s=sin(2*pi/5*t); %原始信号 noise=0.2*rand(size(t)); %定义噪声 x=s+noise; %带噪声的输入信号 y=zeros(size(x)); A=[1 -0.9] B=[0.05 0.06]; y=filter(B,A,x);
·
www.eeworm.com/read/132078/14111194

m ex03180b.m

% 第三章: 例 3.18b: % % 模拟信号 Dt = 0.00005; t = -0.005:Dt:0.005; xa = exp(-1000*abs(t)); % 离散时间信号 Ts = 0.001; n = -5:1:5; x = exp(-1000*abs(n*Ts)); % 离散时间付利叶变换 K = 500; k = 0:1:K; w = pi*k/K; X
·
www.eeworm.com/read/125215/14505840

c printer.c

//#include sbit Pfeedback = 0xa0; /* 打印机脉冲信号 */ sbit Preset = 0xa1; /* 打印机复位信号 */ sbit Ppaper = 0xa2; /* 打印纸测试 */ sbit Print4 = 0x87; /* 打印机一针 */ sbit Print3 =
·
www.eeworm.com/read/225679/14526222

m f3_22.m

%线性调频信号 fm1=fmlin(256,0,0.5); %高斯幅值调制信号 am1=amgauss(256); %合成 sig=am1.*fm1; %显示 %实部 plot(real(sig),'LineWidth',2); hold on; %虚部 plot(imag(sig),'ro--','LineWidth',2); legend('实部','虚部'); xl
·
www.eeworm.com/read/225350/14544401

m psd.m

load('sigcor1.mat') %s=signal(1:2000)'; s11=signal(1:2000); ss=(2./80)*(s11+1480)-0.5;%原始信号的幅度归一化 s=ss'; figure(1) subplot(2,1,1); plot(s); title('原始心电信号'); [c,l]=wavedec(s,10,'coif
·
www.eeworm.com/read/222756/14675844

h capture_pulse.h

sys_data_type TIM_FLAGS; #define zs_flag TIM_FLAGS.Bit.BIT0 //转速信号有信号标志 #define cs_flag TIM_FLAGS.Bit.BIT1 #define pulse_flag TIM_FLAGS.Bit.BIT2 unsigned char zs_count=0; //转速脉冲计数器 unsigne
·
www.eeworm.com/read/222756/14675948

h capture_pulse.h

sys_data_type TIM_FLAGS; #define zs_flag TIM_FLAGS.Bit.BIT0 //转速信号有信号标志 #define cs_flag TIM_FLAGS.Bit.BIT1 #define pulse_flag TIM_FLAGS.Bit.BIT2 unsigned char zs_count=0; //转速脉冲计数器 unsigne
·
www.eeworm.com/read/222756/14676008

h cs_zs.h

sys_data_type TIM_FLAGS; #define zs_flag TIM_FLAGS.Bit.BIT0 //转速信号有信号标志 #define cs_flag TIM_FLAGS.Bit.BIT1 #define pulse_flag TIM_FLAGS.Bit.BIT2 unsigned char zs_count=0; //转速脉冲计数器 unsigne
·
www.eeworm.com/read/222756/14676264

h capture_pulse.h

sys_data_type TIM_FLAGS; #define zs_flag TIM_FLAGS.Bit.BIT0 //转速信号有信号标志 #define cs_flag TIM_FLAGS.Bit.BIT1 #define pulse_flag TIM_FLAGS.Bit.BIT2 unsigned char zs_count=0; //转速脉冲计数器 unsigne
·
www.eeworm.com/read/222756/14676368

h capture_pulse.h

sys_data_type TIM_FLAGS; #define zs_flag TIM_FLAGS.Bit.BIT0 //转速信号有信号标志 #define cs_flag TIM_FLAGS.Bit.BIT1 #define pulse_flag TIM_FLAGS.Bit.BIT2 unsigned char zs_count=0; //转速脉冲计数器 unsigne
·