代码搜索：共阴极数码管

找到约 10,000 项符合「共阴极数码管」的源代码

代码结果 10,000
热门代码： main.c GPIO I2C SPI UART timer interrupt ADC PWM LED
www.eeworm.com/read/359664/10131108

c clock624.c

#include sbit led1=P1^3; /* 4位数码管选通引脚 */ sbit led2=P1^4; sbit led3=P1^6; sbit led4=P1^7; sbit led2dz=P1^5; /*小数点 */ sbit ls164_ab=P3^0; /*74LS164数据线 */ sbit ls164_c
·
www.eeworm.com/read/359664/10131123

c clock623.c

#include sbit led1=P1^3; /* 4位数码管选通引脚 */ sbit led2=P1^4; sbit led3=P1^6; sbit led4=P1^7; sbit led2dz=P1^5; /*小数点 */ sbit ls164_ab=P3^0; /*74LS164数据线 */ sbit ls164_c
·
www.eeworm.com/read/357525/10207163

asm adc0809 basic.asm

LED_0 EQU 30H ;存放三个数码管的段码 LED_1 EQU 31H LED_2 EQU 32H ADC EQU 35H ;存放转换后的数据 ST BIT P3.2 OE BIT P3.0 EOC BIT P3.1 ORG 00H START: MOV LED_0,#00H MOV LED_1,#00H MOV LED
·
www.eeworm.com/read/162966/10255004

txt 4x4矩阵式键盘识别.txt

#include //数码管上显示的0-9的显示代码 unsigned char code LEDCODE[]= { //0 1 2 3 4 0x3f,0x06,0x5b,0x4f,0x66, //5 6 7 8 9 0x6d,0x7d,0x07,0x7f,0x6f, //A b
·
www.eeworm.com/read/426152/10279849

c test eeprom.c

//试验AT24C02EEPROM芯片程序 [实验要求] //在数码管的前两位显示0-99数字,当实验板断电后,再重新加电可继续 //从断电处保存的数据开始上加,这正是体现了AT24C02有断电可保存数据能力. //[实验目的] // 掌握AT24C02程序驱动代码,掌握IIC驱动方式. #include #include
·
www.eeworm.com/read/424580/10438391

lt 计数器.lt

1 ;计数器(计数到10000） 2 ;四位数码管,按键加一减一清零数显程序（P3.2为加一键,P3.3为减一键,计数器清零） 3 LOOP: TEMP EQU 22H ;计数器寄存器 4 TEMP1 EQU 23H ;计数器寄存器 5 ;***
·
www.eeworm.com/read/423958/10514179

asm adc0809 basic.asm

LED_0 EQU 30H ;存放三个数码管的段码 LED_1 EQU 31H LED_2 EQU 32H ADC EQU 35H ;存放转换后的数据 ST BIT P3.2 OE BIT P3.0 EOC BIT P3.1 ORG 00H START: MOV LED_0,#00H MOV LED_1,#00H
·
www.eeworm.com/read/423958/10514694

asm 4x4 keyboard (2).asm

LINE EQU 30H ROW EQU 31H VAL EQU 32H ORG 00H START: MOV DPTR,#TABLE ;段码表首地址 MOV P2,#00H ;数码管显示初始化 LSCAN: MOV P3,#0F0H ;列线置高电平,行线置高电平 L1: JNB P3.0,L2 ;逐行扫描 LCALL DELAY J
·
www.eeworm.com/read/423958/10517531

asm adc0809 basic.asm

LED_0 EQU 30H ;存放三个数码管的段码 LED_1 EQU 31H LED_2 EQU 32H ADC EQU 35H ;存放转换后的数据 ST BIT P3.2 OE BIT P3.0 EOC BIT P3.1 ORG 00H START: MOV LED_0,#00H MOV LED_1,#00H
·
www.eeworm.com/read/423958/10518058

asm 4x4 keyboard (2).asm

LINE EQU 30H ROW EQU 31H VAL EQU 32H ORG 00H START: MOV DPTR,#TABLE ;段码表首地址 MOV P2,#00H ;数码管显示初始化 LSCAN: MOV P3,#0F0H ;列线置高电平,行线置高电平 L1: JNB P3.0,L2 ;逐行扫描 LCALL DELAY J
·