代码搜索：光子计数

找到约 7,260 项符合「光子计数」的源代码

代码结果 7,260
热门代码： main.c GPIO I2C SPI UART timer interrupt ADC PWM LED
www.eeworm.com/read/25885/951427

51

//24c08地址为0xa0 #include #define uchar unsigned char unsigned char code table[]={0xc0,0xf9,0xa4,0xb0,0x99,0x92,0x82,0xf8,0x80,0x90}; unsigned char sec=0; //定义计数值,每过1秒,sec加1 unsigned
·
www.eeworm.com/read/27624/986740

plg ex67.plg

礦ision3 Build Log Project: D:\单片机资料\RZ-51V20 实例程序\14-外中断实验\外中断计数2位数码管显示\ex67.uv2 Project File Date: 05/17/2009 Output:
·
www.eeworm.com/read/27997/992302

c 1.c

#include #include void main(void) { SCON = 0x50; //串口方式1,允许接收 TMOD = 0x20; //定时器1定时方式2 TCON = 0x40; //设定时器1开始计数 TH1 = 0xE8; //11.0592MHz 1200波特率 TL1 = 0xE8; TI =
·
www.eeworm.com/read/27997/992364

c test1.c

#include #include void main(void) { SCON = 0x50; //串口方式1,允许接收 TMOD = 0x20; //定时器1定时方式2 TCON = 0x40; //设定时器1开始计数 TH1 = 0xE8; //11.0592MHz 1200波特率 TL1 = 0xE8; TI =
·
www.eeworm.com/read/27997/992366

c test1.c

#include #include void main(void) { SCON = 0x50; //串口方式1,允许接收 TMOD = 0x20; //定时器1定时方式2 TCON = 0x40; //设定时器1开始计数 TH1 = 0xE8; //11.0592MHz 1200波特率 TL1 = 0xE8; TI =
·
www.eeworm.com/read/28833/1009428

asm ledzd.asm

ORG 0000H AJMP START ORG 000BH ;定时器0的中断向量地址 AJMP TIME0 ;跳转到真正的定时器程序处 ORG 30H START: MOV P0,#0FFH ;关所有灯 MOV TMOD,#00000001B ;定时/计数器0工作于方式1 MOV TH0,#15H M
·
www.eeworm.com/read/28833/1009577

plg led_0-99.plg

礦ision2 Build Log Project: F:\产品配套光盘\51单片机综合学习系统配套光盘\通用例程库\012-2位数码管计数器(汇编)\LED_0-99.uv2 Project File Date: 10/12/2006 Output:
·
www.eeworm.com/read/28833/1009640

plg 7seg.plg

礦ision2 Build Log Project: F:\产品配套光盘\51单片机综合学习系统配套光盘\通用例程库\013-4位数码管计数器经典例程\7seg.uv2 Project File Date: 10/02/2006 Output:
·
www.eeworm.com/read/37287/1071414

asm ex4-2.asm

AUXR1 DATA 0A2H ORG 0000H LJMP MAIN ORG 0100H MAIN: MOV SP,#30H ;设置堆栈指针 MOV R2,#10H ;设置计数值 ANL AUXR1,#0FEH ;DPS.0=0,选择DPTR0 MOV DPTR,#0000H ;设置源数据地址指针 ORL AUXR1,#01H
·
www.eeworm.com/read/37287/1071480

c ex7-3.c

#include "stc12c5a.h" //包含STC12C5A60S2的寄存器定义头文件 void main(void) { TMOD = 0x22; //T0和T1工作在方式2，8位自动重装计数器 AUXR = AUXR | 0x80; //T0工作在1T模式 AUXR = AUXR | 0x40;
·