代码搜索：串行端口

找到约 10,000 项符合「串行端口」的源代码

代码结果 10,000
热门代码： main.c GPIO I2C SPI UART timer interrupt ADC PWM LED
www.eeworm.com/read/164327/10118215

c sh106.c

# include void main(void) { unsigned char astring; /*在11.0592MHz晶振下，设置串行口9600数据传输率，方式3*/ TMOD=0x20; TL1=0xfd;TH1=0xfd; SCON=0xd8;PCON=0x00; /*串口接收字符RI置位，允许串口接收*/ TR1=1; w
·
www.eeworm.com/read/162495/10301850

c time-sync-2051.c

#include "stdio.h" #include "reg51.h" #define MAXLEN 8 // 串行口缓冲区 8ytes 大小 // 0 - 9 的编码 unsigned char code table[] ={ 0xee,0x48,0xd6,0xdc,0x78,0xbc,0xbe,0xc8,0xfe,0xfc,0xff }; //{ 0x11,0xb7,0x29,
·
www.eeworm.com/read/353067/10474673

plg 1.plg

礦ision2 Build Log Project: E:\新建文件夹 (2)\新建文件夹 (2)\新建文件夹\51单片机串行口扩展键盘接口仿真\键盘仿真\keil 源程序\1.uv2 Project File Date: 06/01/2007 Output:
·
www.eeworm.com/read/423958/10514246

asm ad convert.asm

DBUF0 EQU 30H TEMP EQU 40H DIN BIT 0B0H CLK BIT 0B1H ORG 0000H START: MOV R0,#DBUF0 ;显示缓冲器存放0AH，0DH，—，0XH，0XH MOV @R0,#0AH ;串行静态显示“AD XX”XX表示0--F INC
·
www.eeworm.com/read/423958/10517613

asm ad convert.asm

DBUF0 EQU 30H TEMP EQU 40H DIN BIT 0B0H CLK BIT 0B1H ORG 0000H START: MOV R0,#DBUF0 ;显示缓冲器存放0AH，0DH，—，0XH，0XH MOV @R0,#0AH ;串行静态显示“AD XX”XX表示0--F INC
·
www.eeworm.com/read/421678/10710364

plg serialdacpro.plg

礦ision2 Build Log Project: L:\著作\51单片机实用程序设计典型实例\51单片机实用程序设计典型实例\第11章 基于MAX517的串行DA转换\proc\SerialDACPro.uv2 Project File Date: 12/09/2005 Output:
·
www.eeworm.com/read/272827/10942592

c sh106.c

# include void main(void) { unsigned char astring; /*在11.0592MHz晶振下，设置串行口9600数据传输率，方式3*/ TMOD=0x20; TL1=0xfd;TH1=0xfd; SCON=0xd8;PCON=0x00; /*串口接收字符RI置位，允许串口接收*/ TR1=1; w
·
www.eeworm.com/read/271405/10998110

c sh106.c

# include void main(void) { unsigned char astring; /*在11.0592MHz晶振下，设置串行口9600数据传输率，方式3*/ TMOD=0x20; TL1=0xfd;TH1=0xfd; SCON=0xd8;PCON=0x00; /*串口接收字符RI置位，允许串口接收*/ TR1=1; w
·
www.eeworm.com/read/468607/6985852

c sh106.c

# include void main(void) { unsigned char astring; /*在11.0592MHz晶振下，设置串行口9600数据传输率，方式3*/ TMOD=0x20; TL1=0xfd;TH1=0xfd; SCON=0xd8;PCON=0x00; /*串口接收字符RI置位，允许串口接收*/ TR1=1; w
·
www.eeworm.com/read/466178/7040334

c 74ls164.c

#include #include sbit p11=P1^1; sbit p12=P1^2; unsigned char data discode[11]={0XFC,0X60,0XDA,0XF2,0X66,0XB6,0XBE,0XE0,0XFE,0XF6,0x00};//共阴串行 unsigned char leddis[4]={1,2
·