代码搜索：串行信号

找到约 10,000 项符合「串行信号」的源代码

代码结果 10,000
热门代码： main.c GPIO I2C SPI UART timer interrupt ADC PWM LED
www.eeworm.com/read/470983/6902393

vhd clk_1hz.vhd

library ieee; use ieee.std_logic_1164.all; use ieee.std_logic_unsigned.all; entity clk_1hz is port( clk10k:in std_logic; ------时钟信号10khZ clk1hz:out std_logic); -----频率信号输出1Hz
·
www.eeworm.com/read/182497/6951602

h detconst.h

#ifndef DEF_MODULE #define DEF_MODULE #include "AT89x051.h" //ADC相关的定义 #define ADCCLKSPEED 20 //控制ADC时钟信号的速度 //CPU的引脚定义 #define ADCADDRESS P1_0 //SPI接口的数据输入信号 #define ADCCLK P1_4
·
www.eeworm.com/read/461178/7232412

m dm09301.m

% dm09301 % 周期方波信号频谱分析 function CTFS_SQ % 绘制并观察周期方波信号频谱 % Nf：傅里叶级数展开的项数 % an：各次谐波余弦项系数 display('Please input the value of Nf '); Nf = input('Nf = '); an = zeros(Nf+1,1); an(1) = 0; fo
·
www.eeworm.com/read/457757/7318010

c lcd.c

#include #include #include sbit RSPIN = P1^0; //数据/命令选择端 sbit RWPIN = P1^1; //读写控制信号 //sbit EPIN = P1^2; //使能信号 unsigned char XPOS,YPOS; unsigned char c
·
www.eeworm.com/read/327991/7532512

m program_10_02.m

% 装载实际信号 load vonkoch vonkoch=vonkoch(1:510); lv = length(vonkoch); subplot(311), plot(vonkoch);title('被分析信号.'); set(gca,'Xlim',[0 510]) % 执行离散5层sym2小波变换 % 层数1～5分别对应尺度 2, 4, 8, 16 and 32
·
www.eeworm.com/read/447711/7546374

m program_10_02.m

% 装载实际信号 load vonkoch vonkoch=vonkoch(1:510); lv = length(vonkoch); subplot(311), plot(vonkoch);title('被分析信号.'); set(gca,'Xlim',[0 510]) % 执行离散5层sym2小波变换 % 层数1～5分别对应尺度 2, 4, 8, 16 and 32
·
www.eeworm.com/read/439857/7700276

m m06_demodce.m

M = 4; %设置M的数目 Fd = 1; %信号采样速率 Fs = 32; %采样频率 SNRperBit = 5; %信噪比 adjSNR = SNRperBit-10*log10(Fs/Fd)+10*log10(log2(M)); x = randint(5000,1,M); % 源信号 %正交FSK调制 tone = 0
·
www.eeworm.com/read/297062/8056980

#1 pi.#1

#include extern xdata unsigned char buffer_storage[512]; sbit RDN = P2^0 ;//读信号 sbit CSN = P2^1 ;//片选信号 //P1.0---P1.7是数据线 void Pi_Read(void) { int i; //
·
www.eeworm.com/read/297062/8056993

c pi.c

#include extern xdata unsigned char buffer_storage[512]; sbit RDN = P2^0 ;//读信号 sbit CSN = P2^1 ;//片选信号 //P1.0---P1.7是数据线 void Pi_Read(void) { int i; //
·
www.eeworm.com/read/297062/8056999

#3 pi.#3

#include extern xdata unsigned char buffer_storage[512]; sbit RDN = P2^0 ;//读信号 sbit CSN = P2^1 ;//片选信号 //P1.0---P1.7是数据线 void Pi_Read(void) { int i; //
·