搜索结果
找到约 49 项符合
chips 的查询结果
按分类筛选
通信网络 应用于Fttx中的核心光模块技术
FTTx network architectureThe core technology of optical chips in the FTTx transceiversThe core technology of optical transceiver in FTTxThe trend of Next-generation optical transceiver Technology for FTTx
可编程逻辑 XAPP144 -设计CPLD多电压系统
Today’s digital systems combine a myriad of chips with different voltage configurations.Designers must interface 2.5V processors with 3.3V memories—both RAM and ROM—as wellas 5V buses and multiple peripheral chips. Each chip has specific power supply needs. CPLDsare ideal for han ...
单片机开发 a3load is 8051 firmware that can be used for uploading or downloading to EZ-USB RAM (internal or ex
a3load is 8051 firmware that can be used for uploading or downloading
to EZ-USB RAM (internal or external). It implements the vendor specific
command bRequest = 0xA3. The address to download/upload to/from is
specified in the wValue field of the SETUP packet and the length of
the transfer in the wL ...
嵌入式Linux 实时时钟处理芯片ds1337驱动程序
实时时钟处理芯片ds1337驱动程序，芯片由i2c接口控制，将文件加入到linux内核的driver i2c/chips目录下，在makefine中添加该文件直接编译即可
嵌入式Linux tvp5150视频编解码芯片驱动程序
tvp5150视频编解码芯片驱动程序，cpu通过i2c控制该芯片，将驱动程序放入driver/i2c/chips目录下，并且在makefile文件中加入该驱动编译即可。
网络 LinCAN is a Linux kernel module that implements a CAN driver capable of working with multiple cards,
LinCAN is a Linux kernel module that implements a CAN driver capable of working with multiple cards, even with different chips and IO methods. Each communication object can be accessed from multiple applications concurrently.
It supports RT-Linux, 2.2, 2.4, and 2.6 with fully implemented select, po ...
其他书籍 The ability to write efficient, high-speed arithmetic routines ultimately depends upon your knowled
The ability to write efficient, high-speed arithmetic routines ultimately depends
upon your knowledge of the elements of arithmetic as they exist on a computer. That
conclusion and this book are the result of a long and frustrating search for
information on writing arithmetic routines for real-time ...
单片机开发 The following program demonstates the required configuration of the pulse width modulator periphera
The following program demonstates the required configuration of the pulse width modulator
peripheral for the following chips :
Philips 80C552
Philips 80C554
Philips 83/87C552
Philips 83/87C554
Philips 83/87C557E 8
嵌入式Linux 1.under bootloader 1)cd your_dir/mrua_EM8620L_2.5.115.RC8_dev.arm.bootirq/MRUA_src/loader 2)将f
1.under bootloader
1)cd your_dir/mrua_EM8620L_2.5.115.RC8_dev.arm.bootirq/MRUA_src/loader
2)将flash_v3.c改名为flash.c替换原来的flash.c
3)编译
2.under linux kernel
1)cd armutils_2.5.108.0/build_arm/linux-2.4.22-em86xx/drivers/mtd
2)将mtdblock_v4.c改名为mtdblock.c替换原来的mtdblock.c
3)cd ...
VHDL/FPGA/Verilog PCI.VHD, THE INTERFACE MODULE WITH PCI AGENT CHIP --v1.0: For CY7C9689, First Version working on L0
PCI.VHD, THE INTERFACE MODULE WITH PCI AGENT CHIP
--v1.0: For CY7C9689, First Version working on L01A chip
--V2.0: For simplified PCI Agent, Xilinx and AMD chips