搜索结果

LinCAN is a Linux kernel module that implements a CAN driver capable of working with multiple cards, even with different chips and IO methods. Each communication object can be accessed from multiple applications concurrently. It supports RT-Linux, 2.2, 2.4, and 2.6 with fully implemented select, po ...

Avalon Interface Specification,The Avalon interface specification is designed to accommodate peripheral development for the system-on-a-programmable-chip (SOPC) environment. The specification provides peripheral designers with a basis for describing the address-based read/write interface found on ma ...

Flash Low Level Driver Code，can read/write all flash memory

ST7529液晶驱动 The ST7529 is a driver & controller LSI for 32 gray scale graphic dot-matrix liquid crystal display systems. It generates 255 Segment and 160 Common driver circuits. This chip is connected directly to a microprocessor, accepts Serial Peripheral Interface (SPI), 8-bit/16-bit parallel o ...

S29NS-J 128 Megabit (8 M x 16-Bit), 64 Megabit (4 M x 16-Bit), 32 Megabit (2 M x 16-Bit), and 16 Megabit (1 M x 16 Bit), 110 nm CMOS 1.8-Volt only Simultaneous Read/Write, Burst Mode Flash Memories Data Sheet

linux文件系统试验 一、实验目的 学习有关linux文件管理程序如何组织的知识，为简化的文件系统设计并实现一组目录操作。实验中使用软盘的fat12格式，设计一个程序可以对这种格式的磁盘进行一组目录操作。 实验使用了部分linux的系统调用，比如说open() sleek() read() write()几个调用。通过此实验来对linux的文件系统的 ...

单片机操作ＭＭＣ／ＳＤ卡读写fat12/16/32文件系统的程序，外国网站找到的，支持文件open,read write mkdir close 等，基本pc文件功能都支持，专门针对8位mcu，方便移植到各种单片机系统，占用资源很少

This program accesses a SPI EEPROM using polled mode access. The F12x MCU is configured in 4-wire Single Master Mode, and the EEPROM is the only slave device connected to the SPI bus. The read/write operations are tailored to access a Microchip 4 kB EEPROM

// This program accesses a SPI EEPROM using polled mode access. The F06x MCU // is configured in 4-wire Single Master Mode, and the EEPROM is the only // slave device connected to the SPI bus. The read/write operations are // tailored to access a Microchip 4 kB EEPROM 25LC320. The relevant hardware ...

// This program accesses a SPI EEPROM using polled mode access. The F06x MCU // is configured in 4-wire Single Master Mode, and the EEPROM is the only // slave device connected to the SPI bus. The read/write operations are // tailored to access a Microchip 4 kB EEPROM 25LC320. The relevant hardware ...